From 0401bd89b6e7105ca597a221fdbe2a8b75c35296 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Sat, 16 Jan 2010 18:31:34 +0000 Subject: coreboot has 13 instances of IOAPIC setup distributed across a lot of components. This patch is a rewrite of the generic IOAPIC setup code. Additionally it drops the other 12 instances of IOAPIC setup code and makes the components use the generic code. Signed-off-by: Stefan Reinauer Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/amd/amd8111/amd8111_lpc.c | 84 ++----------------------------- 1 file changed, 3 insertions(+), 81 deletions(-) (limited to 'src/southbridge/amd/amd8111') diff --git a/src/southbridge/amd/amd8111/amd8111_lpc.c b/src/southbridge/amd/amd8111/amd8111_lpc.c index 94ef1a44cc..edb32c240c 100644 --- a/src/southbridge/amd/amd8111/amd8111_lpc.c +++ b/src/southbridge/amd/amd8111/amd8111_lpc.c @@ -10,91 +10,12 @@ #include #include #include +#include #include #include "amd8111.h" #define NMI_OFF 0 -struct ioapicreg { - unsigned int reg; - unsigned int value_low, value_high; -}; - -static struct ioapicreg ioapicregvalues[] = { -#define ALL (0xff << 24) -#define NONE (0) -#define DISABLED (1 << 16) -#define ENABLED (0 << 16) -#define TRIGGER_EDGE (0 << 15) -#define TRIGGER_LEVEL (1 << 15) -#define POLARITY_HIGH (0 << 13) -#define POLARITY_LOW (1 << 13) -#define PHYSICAL_DEST (0 << 11) -#define LOGICAL_DEST (1 << 11) -#define ExtINT (7 << 8) -#define NMI (4 << 8) -#define SMI (2 << 8) -#define INT (1 << 8) - /* IO-APIC virtual wire mode configuration */ - /* mask, trigger, polarity, destination, delivery, vector */ - { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE}, - { 1, DISABLED, NONE}, - { 2, DISABLED, NONE}, - { 3, DISABLED, NONE}, - { 4, DISABLED, NONE}, - { 5, DISABLED, NONE}, - { 6, DISABLED, NONE}, - { 7, DISABLED, NONE}, - { 8, DISABLED, NONE}, - { 9, DISABLED, NONE}, - { 10, DISABLED, NONE}, - { 11, DISABLED, NONE}, - { 12, DISABLED, NONE}, - { 13, DISABLED, NONE}, - { 14, DISABLED, NONE}, - { 15, DISABLED, NONE}, - { 16, DISABLED, NONE}, - { 17, DISABLED, NONE}, - { 18, DISABLED, NONE}, - { 19, DISABLED, NONE}, - { 20, DISABLED, NONE}, - { 21, DISABLED, NONE}, - { 22, DISABLED, NONE}, - { 23, DISABLED, NONE}, - /* Be careful and don't write past the end... */ -}; - -static void setup_ioapic(void) -{ - int i; - unsigned long value_low, value_high; - unsigned long ioapic_base = 0xfec00000; - volatile unsigned long *l; - struct ioapicreg *a = ioapicregvalues; - unsigned long bsp_apicid = lapicid(); - - l = (unsigned long *) ioapic_base; - - ioapicregvalues[0].value_high = bsp_apicid<<(56-32); - printk_debug("amd8111: ioapic bsp_apicid = %02lx\n", bsp_apicid); - - for (i = 0; i < ARRAY_SIZE(ioapicregvalues); - i++, a++) { - l[0] = (a->reg * 2) + 0x10; - l[4] = a->value_low; - value_low = l[4]; - l[0] = (a->reg *2) + 0x11; - l[4] = a->value_high; - value_high = l[4]; - if ((i==0) && (value_low == 0xffffffff)) { - printk_warning("IO APIC not responding.\n"); - return; - } - printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n", - a->reg, a->value_low, a->value_high); - } -} - static void enable_hpet(struct device *dev) { unsigned long hpet_address; @@ -114,7 +35,8 @@ static void lpc_init(struct device *dev) byte = pci_read_config8(dev, 0x4B); byte |= 1; pci_write_config8(dev, 0x4B, byte); - setup_ioapic(); + /* Don't rename IO APIC */ + setup_ioapic(IO_APIC_ADDR, 0); /* posted memory write enable */ byte = pci_read_config8(dev, 0x46); -- cgit v1.2.3