From 9f0a2be1658cf6d329aefac2660a53a465312468 Mon Sep 17 00:00:00 2001 From: Kyösti Mälkki Date: Mon, 30 Jun 2014 07:34:36 +0300 Subject: AMD SPI: Optimise for longer writes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Leave it to the implementation of flash->write() to split the writes to match SPI controller and SPI flash part restrictions. This allows for some optimisation for auto-address-increment (AAI) commands. Kconfig AMD_SB_SPI_TX_LEN can be kept as local. Change-Id: I4a8bc55ab7eb0eeda8f25003a8f5ff2a643ab7a7 Signed-off-by: Kyösti Mälkki Reviewed-on: http://review.coreboot.org/6164 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan --- src/southbridge/amd/agesa/hudson/spi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'src/southbridge/amd/agesa') diff --git a/src/southbridge/amd/agesa/hudson/spi.c b/src/southbridge/amd/agesa/hudson/spi.c index f050a63f91..2aeb2c04c0 100644 --- a/src/southbridge/amd/agesa/hudson/spi.c +++ b/src/southbridge/amd/agesa/hudson/spi.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -101,6 +102,20 @@ int spi_xfer(struct spi_slave *slave, const void *dout, u8 count; bytesout--; + + /* + * Check if this is a write command attempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (bytesout > AMD_SB_SPI_TX_LEN) { + printk(BIOS_DEBUG, "FCH SPI: Too much to write. Does your SPI chip driver use" + " spi_crop_chunk()?\n"); + return -1; + } + readoffby1 = bytesout ? 0 : 1; #if CONFIG_SOUTHBRIDGE_AMD_AGESA_YANGTZE -- cgit v1.2.3