From 246e84bc0d04e3e670ca815eca32bcfa3be7e2c2 Mon Sep 17 00:00:00 2001 From: zbao Date: Fri, 13 Jul 2012 18:47:03 +0800 Subject: AGESA F15 wrapper for Hudson. Hudson code has been integrated from CIMx to AGESA. This patch is about the wrapper. Change-Id: I63d951982140b82a3a77a97eb3d55fc75fc0caa3 Signed-off-by: Zheng Bao Signed-off-by: zbao Reviewed-on: http://review.coreboot.org/1157 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/southbridge/amd/agesa/hudson/Kconfig | 208 +++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 src/southbridge/amd/agesa/hudson/Kconfig (limited to 'src/southbridge/amd/agesa/hudson/Kconfig') diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig new file mode 100644 index 0000000000..5b2904232a --- /dev/null +++ b/src/southbridge/amd/agesa/hudson/Kconfig @@ -0,0 +1,208 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_AMD_AGESA_HUDSON + bool + select IOAPIC + select HAVE_USBDEBUG + select TINY_BOOTBLOCK + +config BOOTBLOCK_SOUTHBRIDGE_INIT + string + default "southbridge/amd/agesa/hudson/bootblock.c" + depends on SOUTHBRIDGE_AMD_AGESA_HUDSON + +config SOUTHBRIDGE_AMD_HUDSON_SKIP_ISA_DMA_INIT + bool + default n + depends on SOUTHBRIDGE_AMD_AGESA_HUDSON + +config EHCI_BAR + hex + default 0xfef00000 if SOUTHBRIDGE_AMD_AGESA_HUDSON + +config EHCI_DEBUG_OFFSET + hex + default 0xe0 if SOUTHBRIDGE_AMD_AGESA_HUDSON + + +if SOUTHBRIDGE_AMD_AGESA_HUDSON + +config HUDSON_XHCI_FWM + bool "Add xhci firmware" + default y + help + Add Hudson 2/3/4 XHCI Firmware to support the onboard usb3.0 + Please contact AMD to obtain the related firmware + +config HUDSON_IMC_FWM + bool "Add imc firmware" + default y + help + Add Hudson 2/3/4 IMC Firmware to support the onboard fan control + Please contact AMD to obtain the related firmware + +config HUDSON_GEC_FWM + bool "Add gec firmware" + default n + help + Add Hudson 2/3/4 GEC Firmware + Please contact AMD to obtain the related firmware + +config HUDSON_XHCI_FWM_FILE + string "XHCI firmware path and filename" + default "3rdparty/amd/hudson/xhci.bin" + depends on HUDSON_XHCI_FWM + +config HUDSON_IMC_FWM_FILE + string "IMC firmware path and filename" + default "3rdparty/amd/hudson/imc.bin" + depends on HUDSON_IMC_FWM + +config HUDSON_GEC_FWM_FILE + string "GEC firmware path and filename" + default "src/southbridge/amd/agesa/hudson/gec.bin" + depends on HUDSON_GEC_FWM + +config HUDSON_FWM + bool + default y if HUDSON_XHCI_FWM || HUDSON_IMC_FWM || HUDSON_GEC_FWM + default n if !HUDSON_XHCI_FWM && !HUDSON_IMC_FWM && !HUDSON_GEC_FWM + +if HUDSON_FWM + +config HUDSON_FWM_POSITION + hex "Hudson Firmware rom Position" + default 0xFFF20000 if BOARD_ROMSIZE_KB_1024 + default 0xFFE20000 if BOARD_ROMSIZE_KB_2048 + default 0xFFC20000 if BOARD_ROMSIZE_KB_4096 + default 0xFF820000 if BOARD_ROMSIZE_KB_8192 + default 0xFF020000 if BOARD_ROMSIZE_KB_16384 + help + Hudson requires the firmware MUST to be located at + a specific address (ROM start address + 0x20000), otherwise + xhci host Controller can not find or load the xhci firmware. + + The firmware start address is dependent on the ROM chip size. + The default offset is 0x20000 from the ROM start address, namely + 0xFFF20000 if flash chip size is 1M + 0xFFE20000 if flash chip size is 2M + 0xFFC20000 if flash chip size is 4M + 0xFF820000 if flash chip size is 8M + 0xFF020000 if flash chip size is 16M +endif + +choice + prompt "SATA Mode" + default HUDSON_SATA_IDE + help + Select the mode in which SATA should be driven. NATIVE AHCI, or RAID. + The default is NATIVE. + +config HUDSON_SATA_IDE + bool "NATIVE" + help + NATIVE is the default mode and does not require a ROM. + +config HUDSON_SATA_RAID + bool "RAID" + help + HUDSON RAID mode must have the two required ROM files. + +config HUDSON_SATA_AHCI + bool "AHCI" + help + AHCI may work with or without AHCI ROM. It depends on the payload support. + For example, seabios does not require the AHCI ROM. + +config HUDSON_SATA_LEGACY_IDE + bool "LEGACY IDE" + help + TODO + +config HUDSON_SATA_IDE2AHCI + bool "IDE to AHCI" + help + TODO + +config HUDSON_SATA_AHCI7804 + bool "AHCI7804" + help + AHCI ROM Required, and AMD driver required in the OS. + +config HUDSON_SATA_IDE2AHCI7804 + bool "IDE to AHCI7804" + help + AHCI ROM Required, and AMD driver required in the OS. +endchoice + +config HUDSON_SATA_MODE + hex + depends on (HUDSON_SATA_IDE || HUDSON_SATA_RAID || HUDSON_SATA_AHCI) + default "0x0" if HUDSON_SATA_IDE + default "0x1" if HUDSON_SATA_RAID + default "0x2" if HUDSON_SATA_AHCI + default "0x3" if HUDSON_SATA_LEGACY_IDE + default "0x4" if HUDSON_SATA_IDE2AHCI + default "0x5" if HUDSON_SATA_AHCI7804 + default "0x6" if HUDSON_SATA_IDE2AHCI7804 + +if HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804 +config AHCI_ROM_ID + string "AHCI device PCI IDs" + default "1022,7801" if HUDSON_SATA_AHCI + default "1022,7804" if HUDSON_SATA_AHCI7804 + +config HUDSON_AHCI_ROM + bool "Add a AHCI ROM" + +config AHCI_ROM_FILE + string "AHCI ROM path and filename" + depends on HUDSON_AHCI_ROM + default "src/southbridge/amd/agesa/hudson/ahci.bin" +endif + +if HUDSON_SATA_RAID +config RAID_ROM_ID + string "RAID device PCI IDs" + default "1022,7802" + help + 1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode + +config RAID_ROM_FILE + string "RAID ROM path and filename" + depends on HUDSON_SATA_RAID + default "src/southbridge/amd/agesa/hudson/raid.bin" + +config RAID_MISC_ROM_FILE + string "RAID Misc ROM path and filename" + default "src/southbridge/amd/agesa/hudson/misc.bin" + depends on HUDSON_SATA_RAID + +config RAID_MISC_ROM_POSITION + hex "RAID Misc ROM Position" + default 0xFFF00000 + depends on HUDSON_SATA_RAID + help + The RAID ROM requires that the MISC ROM is located between the range + 0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned. + The CONFIG_ROM_SIZE must larger than 0x100000. +endif + +endif -- cgit v1.2.3