From d85f25fbb9f64332de0c5d8e9a13b00d35d54eb3 Mon Sep 17 00:00:00 2001 From: Felix Held Date: Tue, 18 Oct 2022 18:23:28 +0200 Subject: soc/amd/cezanne/uart: separate data and code The goal of this is to be able to move most of the code over to the common AMD blocks. Signed-off-by: Felix Held Change-Id: I0e585370a0de56787340788acfecc7931820566d Reviewed-on: https://review.coreboot.org/c/coreboot/+/68527 Tested-by: build bot (Jenkins) Reviewed-by: Fred Reitberger --- src/soc/amd/cezanne/uart.c | 52 +++++++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 19 deletions(-) (limited to 'src/soc') diff --git a/src/soc/amd/cezanne/uart.c b/src/soc/amd/cezanne/uart.c index 64252cad2b..ba10945bf8 100644 --- a/src/soc/amd/cezanne/uart.c +++ b/src/soc/amd/cezanne/uart.c @@ -15,16 +15,18 @@ static const struct { uintptr_t base; + unsigned int aoac_device; + const char *acpi_name; struct soc_amd_gpio mux[2]; } uart_info[] = { - [0] = { APU_UART0_BASE, { + [0] = { APU_UART0_BASE, FCH_AOAC_DEV_UART0, "FUR0", { PAD_NF(GPIO_143, UART0_TXD, PULL_NONE), PAD_NF(GPIO_141, UART0_RXD, PULL_NONE), - } }, - [1] = { APU_UART1_BASE, { + } }, + [1] = { APU_UART1_BASE, FCH_AOAC_DEV_UART1, "FUR1", { PAD_NF(GPIO_140, UART1_TXD, PULL_NONE), PAD_NF(GPIO_142, UART1_RXD, PULL_NONE), - } }, + } }, }; uintptr_t get_uart_base(unsigned int idx) @@ -35,6 +37,28 @@ uintptr_t get_uart_base(unsigned int idx) return uart_info[idx].base; } +static enum cb_err get_uart_idx(uintptr_t base, unsigned int *idx) +{ + unsigned int i; + for (i = 0; i < ARRAY_SIZE(uart_info); i++) { + if (base == uart_info[i].base) { + *idx = i; + return CB_SUCCESS; + } + } + return CB_ERR; +} + +static enum cb_err get_uart_aoac_device(uintptr_t base, unsigned int *aoac_dev) +{ + unsigned int idx; + if (get_uart_idx(base, &idx) == CB_ERR) + return CB_ERR; + + *aoac_dev = uart_info[idx].aoac_device; + return CB_SUCCESS; +} + void clear_uart_legacy_config(void) { write16p(FCH_LEGACY_UART_DECODE, 0); @@ -50,14 +74,11 @@ void set_uart_config(unsigned int idx) static const char *uart_acpi_name(const struct device *dev) { - switch (dev->path.mmio.addr) { - case APU_UART0_BASE: - return "FUR0"; - case APU_UART1_BASE: - return "FUR1"; - default: + unsigned int idx; + if (get_uart_idx(dev->path.mmio.addr, &idx) == CB_SUCCESS) + return uart_info[idx].acpi_name; + else return NULL; - } } /* Even though this is called enable, it gets called for both enabled and disabled devices. */ @@ -65,14 +86,7 @@ static void uart_enable(struct device *dev) { unsigned int dev_id; - switch (dev->path.mmio.addr) { - case APU_UART0_BASE: - dev_id = FCH_AOAC_DEV_UART0; - break; - case APU_UART1_BASE: - dev_id = FCH_AOAC_DEV_UART1; - break; - default: + if (get_uart_aoac_device(dev->path.mmio.addr, &dev_id) == CB_ERR) { printk(BIOS_ERR, "%s: Unknown device: %s\n", __func__, dev_path(dev)); return; } -- cgit v1.2.3