From d21a329866a1299b180f8b14b6c73bee3d754e57 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Thu, 19 Feb 2015 14:08:04 -0800 Subject: arm(64): Replace write32() and friends with writel() This patch is a raw application of the following spatch to the directories src/arch/arm(64)?, src/mainboard/, src/soc/ and src/drivers/gic: @@ expression A, V; @@ - write32(V, A) + writel(V, A) @@ expression A, V; @@ - write16(V, A) + writew(V, A) @@ expression A, V; @@ - write8(V, A) + writeb(V, A) This replaces all uses of write{32,16,8}() with write{l,w,b}() which is currently equivalent and much more common. This is a preparatory step that will allow us to easier flip them all at once to the new write32(a,v) model. BRANCH=none BUG=chromium:451388 TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky. Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09 Signed-off-by: Patrick Georgi Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24 Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d Original-Signed-off-by: Julius Werner Original-Reviewed-on: https://chromium-review.googlesource.com/254862 Reviewed-on: http://review.coreboot.org/9834 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/soc/nvidia/tegra/apbmisc.c | 4 +- src/soc/nvidia/tegra/gpio.c | 4 +- src/soc/nvidia/tegra/i2c.c | 12 +-- src/soc/nvidia/tegra/pingroup.c | 2 +- src/soc/nvidia/tegra/pinmux.c | 2 +- src/soc/nvidia/tegra/usb.c | 68 ++++------------ src/soc/nvidia/tegra124/clock.c | 107 ++++++++----------------- src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c | 87 ++++++++++---------- src/soc/nvidia/tegra124/power.c | 6 +- src/soc/nvidia/tegra124/spi.c | 22 ++--- src/soc/nvidia/tegra124/uart.c | 19 +++-- src/soc/nvidia/tegra132/addressmap.c | 6 +- src/soc/nvidia/tegra132/bootblock.c | 2 +- src/soc/nvidia/tegra132/ccplex.c | 14 ++-- src/soc/nvidia/tegra132/clock.c | 66 ++++++--------- src/soc/nvidia/tegra132/cpu.c | 10 +-- src/soc/nvidia/tegra132/dsi.c | 2 +- src/soc/nvidia/tegra132/flow_ctrl.c | 2 +- src/soc/nvidia/tegra132/i2c6.c | 4 +- src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c | 78 +++++++++--------- src/soc/nvidia/tegra132/padconfig.c | 14 ++-- src/soc/nvidia/tegra132/power.c | 2 +- src/soc/nvidia/tegra132/soc.c | 6 +- src/soc/nvidia/tegra132/spi.c | 24 +++--- src/soc/nvidia/tegra132/uart.c | 19 +++-- src/soc/qualcomm/ipq806x/clock.c | 29 +++---- src/soc/qualcomm/ipq806x/usb.c | 79 +++++------------- src/soc/rockchip/rk3288/crypto.c | 20 ++--- src/soc/rockchip/rk3288/timer.c | 6 +- src/soc/samsung/exynos5420/dmc_init_ddr3.c | 4 +- src/soc/samsung/exynos5420/dp_lowlevel.c | 2 +- src/soc/samsung/exynos5420/i2c.c | 12 +-- 32 files changed, 300 insertions(+), 434 deletions(-) (limited to 'src/soc') diff --git a/src/soc/nvidia/tegra/apbmisc.c b/src/soc/nvidia/tegra/apbmisc.c index 3fc0ef7de1..292d21d02f 100644 --- a/src/soc/nvidia/tegra/apbmisc.c +++ b/src/soc/nvidia/tegra/apbmisc.c @@ -26,12 +26,12 @@ static struct apbmisc *misc = (struct apbmisc *)TEGRA_APB_MISC_BASE; void enable_jtag(void) { - write32(PP_CONFIG_CTL_JTAG, &misc->pp_config_ctl); + writel(PP_CONFIG_CTL_JTAG, &misc->pp_config_ctl); } void clamp_tristate_inputs(void) { - write32(PP_PINMUX_CLAMP_INPUTS, &misc->pp_pinmux_global); + writel(PP_PINMUX_CLAMP_INPUTS, &misc->pp_pinmux_global); } void tegra_revision_info(struct tegra_revision *id) diff --git a/src/soc/nvidia/tegra/gpio.c b/src/soc/nvidia/tegra/gpio.c index 009334f74c..8179580add 100644 --- a/src/soc/nvidia/tegra/gpio.c +++ b/src/soc/nvidia/tegra/gpio.c @@ -67,8 +67,8 @@ static void gpio_write_port(int index, size_t offset, u32 mask, u32 value) u32 new_reg = (reg & ~mask) | (value & mask); if (new_reg != reg) { - write32(new_reg, (u8 *)&gpio_banks[bank] + offset + - port * sizeof(u32)); + writel(new_reg, + (u8 *)&gpio_banks[bank] + offset + port * sizeof(u32)); } } diff --git a/src/soc/nvidia/tegra/i2c.c b/src/soc/nvidia/tegra/i2c.c index 6f9142ca6d..b9a5f42a37 100644 --- a/src/soc/nvidia/tegra/i2c.c +++ b/src/soc/nvidia/tegra/i2c.c @@ -40,9 +40,9 @@ static void do_bus_clear(int bus) // 4. Set TERMINATE condition (1 = IMMEDIATE) bc = read32(®s->bus_clear_config); bc |= I2C_BUS_CLEAR_CONFIG_BC_TERMINATE_IMMEDIATE; - write32(bc, ®s->bus_clear_config); + writel(bc, ®s->bus_clear_config); // 4.1 Set MSTR_CONFIG_LOAD and wait for clear - write32(I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE, ®s->config_load); + writel(I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE, ®s->config_load); for (i = 0; i < timeout_ms * 10 && (read32(®s->config_load) & I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE); i++) { printk(BIOS_DEBUG, "%s: wait for MSTR_CONFIG_LOAD to clear\n", @@ -50,7 +50,7 @@ static void do_bus_clear(int bus) udelay(100); } // 5. Set ENABLE to start the bus clear op - write32(bc | I2C_BUS_CLEAR_CONFIG_BC_ENABLE, ®s->bus_clear_config); + writel(bc | I2C_BUS_CLEAR_CONFIG_BC_ENABLE, ®s->bus_clear_config); for (i = 0; i < timeout_ms * 10 && (read32(®s->bus_clear_config) & I2C_BUS_CLEAR_CONFIG_BC_ENABLE); i++) { printk(BIOS_DEBUG, "%s: wait for bus clear completion\n", @@ -74,7 +74,7 @@ static int tegra_i2c_send_recv(int bus, int read, rx_full >>= I2C_FIFO_STATUS_RX_FIFO_FULL_CNT_SHIFT; while (header_words && tx_empty) { - write32(*headers++, ®s->tx_packet_fifo); + writel(*headers++, ®s->tx_packet_fifo); header_words--; tx_empty--; } @@ -96,7 +96,7 @@ static int tegra_i2c_send_recv(int bus, int read, int todo = MIN(data_len, sizeof(word)); memcpy(&word, data, todo); - write32(word, ®s->tx_packet_fifo); + writel(word, ®s->tx_packet_fifo); data_len -= todo; data += sizeof(word); tx_empty--; @@ -208,5 +208,5 @@ void i2c_init(unsigned bus) { struct tegra_i2c_regs * const regs = tegra_i2c_info[bus].base; - write32(I2C_CNFG_PACKET_MODE_EN, ®s->cnfg); + writel(I2C_CNFG_PACKET_MODE_EN, ®s->cnfg); } diff --git a/src/soc/nvidia/tegra/pingroup.c b/src/soc/nvidia/tegra/pingroup.c index 858cb44e34..c856c173ac 100644 --- a/src/soc/nvidia/tegra/pingroup.c +++ b/src/soc/nvidia/tegra/pingroup.c @@ -26,7 +26,7 @@ static uint32_t *pingroup_regs = (void *)TEGRA_APB_PINGROUP_BASE; void pingroup_set_config(int group_index, uint32_t config) { - write32(config, &pingroup_regs[group_index]); + writel(config, &pingroup_regs[group_index]); } uint32_t pingroup_get_config(int group_index) diff --git a/src/soc/nvidia/tegra/pinmux.c b/src/soc/nvidia/tegra/pinmux.c index 6e4b3ff195..a88a063cac 100644 --- a/src/soc/nvidia/tegra/pinmux.c +++ b/src/soc/nvidia/tegra/pinmux.c @@ -26,7 +26,7 @@ static uint32_t *pinmux_regs = (void *)TEGRA_APB_PINMUX_BASE; void pinmux_set_config(int pin_index, uint32_t config) { - write32(config, &pinmux_regs[pin_index]); + writel(config, &pinmux_regs[pin_index]); } uint32_t pinmux_get_config(int pin_index) diff --git a/src/soc/nvidia/tegra/usb.c b/src/soc/nvidia/tegra/usb.c index 3268ee1a74..c666c40f3b 100644 --- a/src/soc/nvidia/tegra/usb.c +++ b/src/soc/nvidia/tegra/usb.c @@ -126,7 +126,7 @@ static void usb_ehci_reset_and_prepare(struct usb_ctlr *usb, enum usb_phy_type t { int timeout = 1000; - write32(1 << 1, &usb->ehci_usbcmd); /* Host Controller Reset */ + writel(1 << 1, &usb->ehci_usbcmd); /* Host Controller Reset */ /* TODO: Resets are long, find way to parallelize... or just use XHCI */ while (--timeout && (read32(&usb->ehci_usbcmd) & 1 << 1)) /* wait for HC to reset */; @@ -137,11 +137,11 @@ static void usb_ehci_reset_and_prepare(struct usb_ctlr *usb, enum usb_phy_type t } /* Controller mode: HOST */ - write32(3 << 0, &usb->usb_mode); + writel(3 << 0, &usb->usb_mode); /* Parallel transceiver selct */ - write32(type << 29, &usb->lpm_ctrl); + writel(type << 29, &usb->lpm_ctrl); /* Tx FIFO Burst thresh */ - write32(0x10 << 16, &usb->tx_fill_tuning); + writel(0x10 << 16, &usb->tx_fill_tuning); } /* Assume USBx clocked, out of reset, UTMI+ PLL set up, SAMP_x out of pwrdn */ @@ -157,61 +157,27 @@ void usb_setup_utmip(void *usb_base) udelay(1); /* Take stuff out of pwrdn and add some magic numbers from U-Boot */ - write32(0x8 << 25 | /* HS slew rate [10:4] */ - 0x3 << 22 | /* HS driver output 'SETUP' [6:4] */ - 0 << 21 | /* LS bias selection */ - 0 << 18 | /* PDZI pwrdn */ - 0 << 16 | /* PD2 pwrdn */ - 0 << 14 | /* PD pwrdn */ - 1 << 13 | /* (rst) HS receiver terminations */ - 0x1 << 10 | /* (rst) LS falling slew rate */ - 0x1 << 8 | /* (rst) LS rising slew rate */ - 0x4 << 0 | /* HS driver output 'SETUP' [3:0] */ - 0, &usb->utmip.xcvr0); - write32(0x7 << 18 | /* Termination range adjustment */ - 0 << 4 | /* PDDR pwrdn */ - 0 << 2 | /* PDCHRP pwrdn */ - 0 << 0 | /* PDDISC pwrdn */ - 0, &usb->utmip.xcvr1); - write32(1 << 19 | /* FS send initial J before sync(?) */ - 1 << 16 | /* (rst) Allow stuff error on SoP */ - 1 << 9 | /* (rst) Check disc only on EoP */ - 0, &usb->utmip.tx); - write32(0x2 << 30 | /* (rst) Keep pattern on active */ - 1 << 28 | /* (rst) Realign inertia on pkt */ - 0x1 << 24 | /* (rst) edges-1 to move sampling */ - 0x3 << 21 | /* (rst) squelch delay on EoP */ - 0x11 << 15 | /* cycles until IDLE */ - 0x10 << 10 | /* elastic input depth */ - 0, &usb->utmip.hsrx0); + writel(0x8 << 25 | 0x3 << 22 | 0 << 21 | 0 << 18 | 0 << 16 | 0 << 14 | 1 << 13 | 0x1 << 10 | 0x1 << 8 | 0x4 << 0 | 0, + &usb->utmip.xcvr0); + writel(0x7 << 18 | 0 << 4 | 0 << 2 | 0 << 0 | 0, &usb->utmip.xcvr1); + writel(1 << 19 | 1 << 16 | 1 << 9 | 0, &usb->utmip.tx); + writel(0x2 << 30 | 1 << 28 | 0x1 << 24 | 0x3 << 21 | 0x11 << 15 | 0x10 << 10 | 0, + &usb->utmip.hsrx0); /* U-Boot claims the USBD values for these are used across all UTMI+ * PHYs. That sounds so horribly wrong that I'm not going to implement * it, but keep it in mind if we're ever not using the USBD port. */ - write32(0x1 << 24 | /* HS disconnect detect level [2] */ - 1 << 23 | /* (rst) IDPD value */ - 1 << 22 | /* (rst) IDPD select */ - 1 << 11 | /* (rst) OTG pwrdn */ - 0 << 10 | /* bias pwrdn */ - 0x1 << 2 | /* HS disconnect detect level [1:0] */ - 0x2 << 0 | /* HS squelch detect level */ - 0, &usb->utmip.bias0); - - write32(khz / 2200 << 3 | /* bias pwrdn cycles (20us?) */ - 1 << 2 | /* (rst) VBUS wakeup pwrdn */ - 0 << 0 | /* PDTRK pwrdn */ - 0, &usb->utmip.bias1); - - write32(0xffff << 16 | /* (rst) */ - 25 * khz / 10 << 0 | /* TODO: what's this, really? */ - 0, &usb->utmip.debounce); + writel(0x1 << 24 | 1 << 23 | 1 << 22 | 1 << 11 | 0 << 10 | 0x1 << 2 | 0x2 << 0 | 0, + &usb->utmip.bias0); + + writel(khz / 2200 << 3 | 1 << 2 | 0 << 0 | 0, &usb->utmip.bias1); + + writel(0xffff << 16 | 25 * khz / 10 << 0 | 0, &usb->utmip.debounce); udelay(1); setbits_le32(&usb->utmip.misc1, 1 << 30); /* PHY_XTAL_CLKEN */ - write32(1 << 12 | /* UTMI+ enable */ - 0 << 11 | /* UTMI+ reset */ - 0, &usb->suspend_ctrl); + writel(1 << 12 | 0 << 11 | 0, &usb->suspend_ctrl); usb_ehci_reset_and_prepare(usb, USB_PHY_UTMIP); printk(BIOS_DEBUG, "USB controller @ %p set up with UTMI+ PHY\n",usb_base); diff --git a/src/soc/nvidia/tegra124/clock.c b/src/soc/nvidia/tegra124/clock.c index 225a764431..dc1d1dbe8a 100644 --- a/src/soc/nvidia/tegra124/clock.c +++ b/src/soc/nvidia/tegra124/clock.c @@ -186,11 +186,11 @@ void clock_init_arm_generic_timer(void) set_cntfrq(freq); // Record the system timer frequency. - write32(freq, &sysctr->cntfid0); + writel(freq, &sysctr->cntfid0); // Enable the system counter. uint32_t cntcr = read32(&sysctr->cntcr); cntcr |= SYSCTR_CNTCR_EN | SYSCTR_CNTCR_HDBG; - write32(cntcr, &sysctr->cntcr); + writel(cntcr, &sysctr->cntcr); } #define SOR0_CLK_SEL0 (1 << 14) @@ -243,25 +243,14 @@ static void init_utmip_pll(void) clrbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */ udelay(1); - write32(80 << 16 | /* (rst) phy_divn */ - 1 << 8 | /* (rst) phy_divm */ - 0, &clk_rst->utmip_pll_cfg0); /* 960MHz * 1 / 80 == 12 MHz */ + writel(80 << 16 | 1 << 8 | 0, &clk_rst->utmip_pll_cfg0); /* 960MHz * 1 / 80 == 12 MHz */ - write32(CEIL_DIV(khz, 8000) << 27 | /* pllu_enbl_cnt / 8 (1us) */ - 0 << 16 | /* PLLU pwrdn */ - 0 << 14 | /* pll_enable pwrdn */ - 0 << 12 | /* pll_active pwrdn */ - CEIL_DIV(khz, 102) << 0 | /* phy_stbl_cnt / 256 (2.5ms) */ - 0, &clk_rst->utmip_pll_cfg1); + writel(CEIL_DIV(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | CEIL_DIV(khz, 102) << 0 | 0, + &clk_rst->utmip_pll_cfg1); /* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */ - write32(0 << 24 | /* SAMP_D/XDEV pwrdn */ - CEIL_DIV(khz, 3200) << 18 | /* phy_actv_cnt / 16 (5us) */ - CEIL_DIV(khz, 256) << 6 | /* pllu_stbl_cnt / 256 (1ms) */ - 0 << 4 | /* SAMP_C/USB3 pwrdn */ - 0 << 2 | /* SAMP_B/XHOST pwrdn */ - 0 << 0 | /* SAMP_A/USBD pwrdn */ - 0, &clk_rst->utmip_pll_cfg2); + writel(0 << 24 | CEIL_DIV(khz, 3200) << 18 | CEIL_DIV(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0, + &clk_rst->utmip_pll_cfg2); setbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */ } @@ -398,8 +387,8 @@ clock_display(u32 frequency) * been determined through trial and error (must lead to div 13 at 24MHz). */ void clock_early_uart(void) { - write32(CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | - CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900), &clk_rst->clk_src_uarta); + writel(CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900), + &clk_rst->clk_src_uarta); setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_UARTA); udelay(2); clrbits_le32(&clk_rst->rst_dev_l, CLK_L_UARTA); @@ -486,28 +475,24 @@ void clock_cpu0_config(void *entry) { void * const evp_cpu_reset = (uint8_t *)TEGRA_EVP_BASE + 0x100; - write32((uintptr_t)_estack, &maincpu_stack_pointer); - write32((uintptr_t)entry, &maincpu_entry_point); - write32((uintptr_t)&maincpu_setup, evp_cpu_reset); + writel((uintptr_t)_estack, &maincpu_stack_pointer); + writel((uintptr_t)entry, &maincpu_entry_point); + writel((uintptr_t)&maincpu_setup, evp_cpu_reset); /* Set active CPU cluster to G */ clrbits_le32(&flow->cluster_control, 1); // Set up cclk_brst and divider. - write32((CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) | - (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) | - (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) | - (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) | - (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28), - &clk_rst->cclk_brst_pol); - write32(CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB, - &clk_rst->super_cclk_div); + writel((CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) | (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28), + &clk_rst->cclk_brst_pol); + writel(CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB, + &clk_rst->super_cclk_div); // Enable the clocks for CPUs 0-3. uint32_t cpu_cmplx_clr = read32(&clk_rst->clk_cpu_cmplx_clr); cpu_cmplx_clr |= CRC_CLK_CLR_CPU0_STP | CRC_CLK_CLR_CPU1_STP | CRC_CLK_CLR_CPU2_STP | CRC_CLK_CLR_CPU3_STP; - write32(cpu_cmplx_clr, &clk_rst->clk_cpu_cmplx_clr); + writel(cpu_cmplx_clr, &clk_rst->clk_cpu_cmplx_clr); // Enable other CPU related clocks. setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_CPU); @@ -518,36 +503,23 @@ void clock_cpu0_config(void *entry) void clock_cpu0_remove_reset(void) { // Disable the reset on the non-CPU parts of the fast cluster. - write32(CRC_RST_CPUG_CLR_NONCPU, - &clk_rst->rst_cpug_cmplx_clr); + writel(CRC_RST_CPUG_CLR_NONCPU, &clk_rst->rst_cpug_cmplx_clr); // Disable the various resets on the CPUs. - write32(CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 | - CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 | - CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 | - CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 | - CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 | - CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 | - CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 | - CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | - CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG, - &clk_rst->rst_cpug_cmplx_clr); + writel(CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 | CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 | CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 | CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 | CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 | CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 | CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 | CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG, + &clk_rst->rst_cpug_cmplx_clr); // Disable the reset on the non-CPU parts of the slow cluster. - write32(CRC_RST_CPULP_CLR_NONCPU, - &clk_rst->rst_cpulp_cmplx_clr); + writel(CRC_RST_CPULP_CLR_NONCPU, &clk_rst->rst_cpulp_cmplx_clr); // Disable the various resets on the LP CPU. - write32(CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | - CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | - CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG, - &clk_rst->rst_cpulp_cmplx_clr); + writel(CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG, + &clk_rst->rst_cpulp_cmplx_clr); } void clock_halt_avp(void) { for (;;) { - write32(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | - FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT, - &flow->halt_cop_events); + writel(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT, + &flow->halt_cop_events); } } @@ -564,15 +536,12 @@ void clock_init(void) /* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA * features section in the TRM). */ - write32(TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT | - TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT, - &clk_rst->clk_sys_rate); - write32(CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) << - PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | - PLL_OUT_RSTN, &clk_rst->pllc_out); - write32(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | - SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT, - &clk_rst->sclk_brst_pol); /* sclk = 300 MHz */ + writel(TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT | TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT, + &clk_rst->clk_sys_rate); + writel(CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN, + &clk_rst->pllc_out); + writel(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT, + &clk_rst->sclk_brst_pol); /* sclk = 300 MHz */ /* Change the oscillator drive strength (from U-Boot -- why?) */ clrsetbits_le32(&clk_rst->osc_ctrl, OSC_XOFS_MASK, @@ -590,16 +559,10 @@ void clock_init(void) clrbits_le32(&clk_rst->pllx_misc3, PLLX_IDDQ_MASK); /* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */ - write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | - (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT, - &clk_rst->pllp_outa); - write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | - (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT, - &clk_rst->pllp_outb); + writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT, + &clk_rst->pllp_outa); + writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT, + &clk_rst->pllp_outb); /* init pllx */ init_pll(&clk_rst->pllx_base, &clk_rst->pllx_misc, diff --git a/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c index 0a3cb48641..9418e152da 100644 --- a/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c +++ b/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c @@ -282,17 +282,17 @@ inline static void write32(uint32_t val, void *addr) inline static void setbits32(uint32_t bits, void *addr) { - write32(read32(addr) | bits, addr); + writel(read32(addr) | bits, addr); } inline static void clrbits32(uint32_t bits, void *addr) { - write32(read32(addr) & ~bits, addr); + writel(read32(addr) & ~bits, addr); } static void __attribute__((noreturn)) reset(void) { - write32(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr); + writel(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr); halt(); } @@ -337,7 +337,7 @@ static void config_oscillator(void) osc_ctrl &= ~OSC_XOFS_MASK; osc_ctrl |= (xofs << OSC_XOFS_SHIFT); osc_ctrl |= OSC_XOE; - write32(osc_ctrl, clk_rst_osc_ctrl_ptr); + writel(osc_ctrl, clk_rst_osc_ctrl_ptr); } static void config_pllu(void) @@ -382,17 +382,17 @@ static void config_pllu(void) // Configure PLLU. uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE | (divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT); - write32(base, clk_rst_pllu_base_ptr); + writel(base, clk_rst_pllu_base_ptr); uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) | (lfcon << PLLU_LFCON_SHIFT); - write32(misc, clk_rst_pllu_misc_ptr); + writel(misc, clk_rst_pllu_misc_ptr); // Enable PLLU. base &= ~PLLU_BYPASS; base |= PLLU_ENABLE; - write32(base, clk_rst_pllu_base_ptr); + writel(base, clk_rst_pllu_base_ptr); misc |= PLLU_LOCK_ENABLE; - write32(misc, clk_rst_pllu_misc_ptr); + writel(misc, clk_rst_pllu_misc_ptr); } static void config_tsc(void) @@ -400,26 +400,26 @@ static void config_tsc(void) // Tell the TSC the oscillator frequency. switch (get_osc_freq()) { case OSC_FREQ_12: - write32(12000000, sysctr_cntfid0_ptr); + writel(12000000, sysctr_cntfid0_ptr); break; case OSC_FREQ_48: - write32(48000000, sysctr_cntfid0_ptr); + writel(48000000, sysctr_cntfid0_ptr); break; case OSC_FREQ_16P8: - write32(16800000, sysctr_cntfid0_ptr); + writel(16800000, sysctr_cntfid0_ptr); break; case OSC_FREQ_19P2: - write32(19200000, sysctr_cntfid0_ptr); + writel(19200000, sysctr_cntfid0_ptr); break; case OSC_FREQ_38P4: - write32(38400000, sysctr_cntfid0_ptr); + writel(38400000, sysctr_cntfid0_ptr); break; case OSC_FREQ_26: - write32(26000000, sysctr_cntfid0_ptr); + writel(26000000, sysctr_cntfid0_ptr); break; default: // Default to 13MHz. - write32(13000000, sysctr_cntfid0_ptr); + writel(13000000, sysctr_cntfid0_ptr); break; } @@ -430,8 +430,8 @@ static void config_tsc(void) static void enable_cpu_clocks(void) { // Enable the CPU complex clock. - write32(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr); - write32(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr); + writel(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr); + writel(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr); } @@ -441,7 +441,7 @@ static void enable_cpu_clocks(void) static void config_core_sight(void) { // Enable the CoreSight clock. - write32(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr); + writel(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr); /* * De-assert CoreSight reset. @@ -449,22 +449,22 @@ static void config_core_sight(void) * now. It will be restored to its original clock source * when the CPU-side restoration code runs. */ - write32(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr); + writel(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr); } static void config_mselect(void) { // Set MSELECT clock source to PLLP with 1:4 divider. - write32((6 << MSELECT_CLK_DIV_SHIFT) | MSELECT_CLK_SRC_PLLP_OUT0, - clk_rst_clk_src_mselect_ptr); + writel((6 << MSELECT_CLK_DIV_SHIFT) | MSELECT_CLK_SRC_PLLP_OUT0, + clk_rst_clk_src_mselect_ptr); // Enable clock to MSELECT. - write32(CLK_ENB_MSELECT, clk_rst_clk_enb_v_set_ptr); + writel(CLK_ENB_MSELECT, clk_rst_clk_enb_v_set_ptr); udelay(2); // Bring MSELECT out of reset. - write32(SWR_MSELECT_RST, clk_rst_rst_dev_v_clr_ptr); + writel(SWR_MSELECT_RST, clk_rst_rst_dev_v_clr_ptr); } @@ -474,19 +474,16 @@ static void config_mselect(void) static void clear_cpu_resets(void) { // Take the non-cpu of the G and LP clusters out of reset. - write32(CLR_NONCPURESET, clk_rst_rst_cpulp_cmplx_clr_ptr); - write32(CLR_NONCPURESET, clk_rst_rst_cpug_cmplx_clr_ptr); + writel(CLR_NONCPURESET, clk_rst_rst_cpulp_cmplx_clr_ptr); + writel(CLR_NONCPURESET, clk_rst_rst_cpug_cmplx_clr_ptr); // Clear software controlled reset of the slow cluster. - write32(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0, - clk_rst_rst_cpulp_cmplx_clr_ptr); + writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0, + clk_rst_rst_cpulp_cmplx_clr_ptr); // Clear software controlled reset of the fast cluster. - write32(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | - CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | - CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | - CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3, - clk_rst_rst_cpug_cmplx_clr_ptr); + writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3, + clk_rst_rst_cpug_cmplx_clr_ptr); } @@ -516,7 +513,7 @@ static void power_on_partition(unsigned id) uint32_t bit = 0x1 << id; if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) { // Partition is not on. Turn it on. - write32(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr); + writel(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr); // Wait until the partition is powerd on. while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) @@ -546,8 +543,8 @@ static void power_on_main_cpu(void) */ uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr); - write32(orig_timer * (204000000 / 32768), - pmc_ctlr_cpupwrgood_timer_ptr); + writel(orig_timer * (204000000 / 32768), + pmc_ctlr_cpupwrgood_timer_ptr); if (wakeup_on_lp()) { power_on_partition(PARTID_C1NC); @@ -559,7 +556,7 @@ static void power_on_main_cpu(void) } // Restore the original PMC_CPUPWRGOOD_TIMER. - write32(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr); + writel(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr); } @@ -581,17 +578,17 @@ void lp0_resume(void) flow_ctlr_cluster_control_ptr); // Program SUPER_CCLK_DIVIDER. - write32(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr); + writel(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr); config_core_sight(); config_pllu(); // Set the CPU reset vector. - write32(get_wakeup_vector(), evp_cpu_reset_ptr); + writel(get_wakeup_vector(), evp_cpu_reset_ptr); // Select CPU complex clock source. - write32(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr); + writel(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr); config_mselect(); @@ -602,14 +599,14 @@ void lp0_resume(void) uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr); ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK; ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT; - write32(ack_width, clk_rst_cpu_softrst_ctrl2_ptr); + writel(ack_width, clk_rst_cpu_softrst_ctrl2_ptr); config_tsc(); // Disable VPR. - write32(0, mc_video_protect_size_mb_ptr); - write32(VIDEO_PROTECT_WRITE_ACCESS_DISABLE, - mc_video_protect_reg_ctrl_ptr); + writel(0, mc_video_protect_size_mb_ptr); + writel(VIDEO_PROTECT_WRITE_ACCESS_DISABLE, + mc_video_protect_reg_ctrl_ptr); enable_cpu_clocks(); @@ -622,8 +619,8 @@ void lp0_resume(void) // Halt the AVP. while (1) - write32(FLOW_MODE_STOP | EVENT_JTAG, - flow_ctlr_halt_cop_events_ptr); + writel(FLOW_MODE_STOP | EVENT_JTAG, + flow_ctlr_halt_cop_events_ptr); } diff --git a/src/soc/nvidia/tegra124/power.c b/src/soc/nvidia/tegra124/power.c index 825b27bda9..b31d3a7781 100644 --- a/src/soc/nvidia/tegra124/power.c +++ b/src/soc/nvidia/tegra124/power.c @@ -48,7 +48,7 @@ static void power_ungate_partition(uint32_t id) pwrgate_toggle &= ~(PMC_PWRGATE_TOGGLE_PARTID_MASK); pwrgate_toggle |= (id << PMC_PWRGATE_TOGGLE_PARTID_SHIFT); pwrgate_toggle |= PMC_PWRGATE_TOGGLE_START; - write32(pwrgate_toggle, &pmc->pwrgate_toggle); + writel(pwrgate_toggle, &pmc->pwrgate_toggle); // Wait for the request to be accepted. while (read32(&pmc->pwrgate_toggle) & PMC_PWRGATE_TOGGLE_START) @@ -73,12 +73,12 @@ void power_enable_and_ungate_cpu(void) * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (150MHz), * set it for 5ms as per SysEng (5ms * PCLK_KHZ * 1000 / 1s). */ - write32((TEGRA_PCLK_KHZ * 5), &pmc->cpupwrgood_timer); + writel((TEGRA_PCLK_KHZ * 5), &pmc->cpupwrgood_timer); uint32_t cntrl = read32(&pmc->cntrl); cntrl &= ~PMC_CNTRL_CPUPWRREQ_POLARITY; cntrl |= PMC_CNTRL_CPUPWRREQ_OE; - write32(cntrl, &pmc->cntrl); + writel(cntrl, &pmc->cntrl); power_ungate_partition(POWER_PARTID_CRAIL); diff --git a/src/soc/nvidia/tegra124/spi.c b/src/soc/nvidia/tegra124/spi.c index aefb4da0d6..0584177d5e 100644 --- a/src/soc/nvidia/tegra124/spi.c +++ b/src/soc/nvidia/tegra124/spi.c @@ -230,7 +230,7 @@ int spi_claim_bus(struct spi_slave *slave) else val |= SPI_CMD1_CS_SW_VAL; - write32(val, ®s->command1); + writel(val, ®s->command1); return 0; } @@ -246,7 +246,7 @@ void spi_release_bus(struct spi_slave *slave) else val &= ~SPI_CMD1_CS_SW_VAL; - write32(val, ®s->command1); + writel(val, ®s->command1); } static void dump_fifo_status(struct tegra_spi_channel *spi) @@ -383,12 +383,12 @@ static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi, /* BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and * PIO transfers */ - write32(todo - 1, &spi->regs->dma_blk); + writel(todo - 1, &spi->regs->dma_blk); if (dir == SPI_SEND) { unsigned int to_fifo = bytes; while (to_fifo) { - write32(*p, &spi->regs->tx_fifo); + writel(*p, &spi->regs->tx_fifo); p++; to_fifo--; } @@ -493,11 +493,11 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi, /* ensure bytes to send will be visible to DMA controller */ dcache_clean_by_mva(spi->out_buf, bytes); - write32((u32)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr); - write32((u32)spi->out_buf, &spi->dma_out->regs->ahb_ptr); + writel((u32)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr); + writel((u32)spi->out_buf, &spi->dma_out->regs->ahb_ptr); setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR); setup_dma_params(spi, spi->dma_out); - write32(wcount, &spi->dma_out->regs->wcount); + writel(wcount, &spi->dma_out->regs->wcount); } else { spi->dma_in = dma_claim(); if (!spi->dma_in) @@ -506,15 +506,15 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi, /* avoid data collisions */ dcache_clean_invalidate_by_mva(spi->in_buf, bytes); - write32((u32)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr); - write32((u32)spi->in_buf, &spi->dma_in->regs->ahb_ptr); + writel((u32)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr); + writel((u32)spi->in_buf, &spi->dma_in->regs->ahb_ptr); clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR); setup_dma_params(spi, spi->dma_in); - write32(wcount, &spi->dma_in->regs->wcount); + writel(wcount, &spi->dma_in->regs->wcount); } /* BLOCK_SIZE starts at n-1 */ - write32(todo - 1, &spi->regs->dma_blk); + writel(todo - 1, &spi->regs->dma_blk); return todo; } diff --git a/src/soc/nvidia/tegra124/uart.c b/src/soc/nvidia/tegra124/uart.c index a25540b025..26aec20030 100644 --- a/src/soc/nvidia/tegra124/uart.c +++ b/src/soc/nvidia/tegra124/uart.c @@ -56,20 +56,19 @@ static void tegra124_uart_init(struct tegra124_uart *uart_ptr) tegra124_uart_tx_flush(uart_ptr); // Disable interrupts. - write8(0, &uart_ptr->ier); + writeb(0, &uart_ptr->ier); // Force DTR and RTS to high. - write8(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr); + writeb(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr); // Set line configuration, access divisor latches. - write8(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr); + writeb(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr); // Set the divisor. - write8(divisor & 0xff, &uart_ptr->dll); - write8((divisor >> 8) & 0xff, &uart_ptr->dlm); + writeb(divisor & 0xff, &uart_ptr->dll); + writeb((divisor >> 8) & 0xff, &uart_ptr->dlm); // Hide the divisor latches. - write8(line_config, &uart_ptr->lcr); + writeb(line_config, &uart_ptr->lcr); // Enable FIFOs, and clear receive and transmit. - write8(UART8250_FCR_FIFO_EN | - UART8250_FCR_CLEAR_RCVR | - UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr); + writeb(UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT, + &uart_ptr->fcr); } static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr) @@ -82,7 +81,7 @@ static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr) static void tegra124_uart_tx_byte(struct tegra124_uart *uart_ptr, unsigned char data) { while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE)); - write8(data, &uart_ptr->thr); + writeb(data, &uart_ptr->thr); } static void tegra124_uart_tx_flush(struct tegra124_uart *uart_ptr) diff --git a/src/soc/nvidia/tegra132/addressmap.c b/src/soc/nvidia/tegra132/addressmap.c index 72563f5095..377d083e02 100644 --- a/src/soc/nvidia/tegra132/addressmap.c +++ b/src/soc/nvidia/tegra132/addressmap.c @@ -187,9 +187,9 @@ void trustzone_region_init(void) return; /* Set the carveout region. */ - write32(tz_base_mib << 20, &mc->security_cfg0); - write32(tz_size_mib, &mc->security_cfg1); + writel(tz_base_mib << 20, &mc->security_cfg0); + writel(tz_size_mib, &mc->security_cfg1); /* Enable SMMU translations */ - write32(MC_SMMU_CONFIG_ENABLE, &mc->smmu_config); + writel(MC_SMMU_CONFIG_ENABLE, &mc->smmu_config); } diff --git a/src/soc/nvidia/tegra132/bootblock.c b/src/soc/nvidia/tegra132/bootblock.c index ede46ef401..6fd36eb2bd 100644 --- a/src/soc/nvidia/tegra132/bootblock.c +++ b/src/soc/nvidia/tegra132/bootblock.c @@ -46,7 +46,7 @@ static void save_odmdata(void) bct_offset = read32((void *)(TEGRA_SRAM_BASE + BCT_OFFSET_IN_BIT)); if (bct_offset > TEGRA_SRAM_BASE && bct_offset < TEGRA_SRAM_MAX) { odmdata = read32((void *)(bct_offset + ODMDATA_OFFSET_IN_BCT)); - write32(odmdata, &pmc->odmdata); + writel(odmdata, &pmc->odmdata); } } diff --git a/src/soc/nvidia/tegra132/ccplex.c b/src/soc/nvidia/tegra132/ccplex.c index 520c244fbf..1cc59add84 100644 --- a/src/soc/nvidia/tegra132/ccplex.c +++ b/src/soc/nvidia/tegra132/ccplex.c @@ -46,12 +46,12 @@ static int ccplex_start(void) struct tegra_pmc_regs * const pmc = PMC_REGS; /* Set the handshake bit to be knocked down. */ - write32(handshake_mask, &pmc->scratch118); + writel(handshake_mask, &pmc->scratch118); /* Assert nCXRSET[1] */ reg = read32(CLK_RST_REG(rst_cpu_cmplx_set)); reg |= cxreset1_mask; - write32(reg, CLK_RST_REG(rst_cpu_cmplx_set)); + writel(reg, CLK_RST_REG(rst_cpu_cmplx_set)); stopwatch_init_msecs_expire(&sw, timeout_ms); while (1) { @@ -140,14 +140,14 @@ static void request_ram_repair(void) /* Perform cluster 0 ram repair */ reg = read32(&flow->ram_repair); reg |= req; - write32(reg, &flow->ram_repair); + writel(reg, &flow->ram_repair); while ((read32(&flow->ram_repair) & sts) != sts) ; /* Perform cluster 1 ram repair */ reg = read32(&flow->ram_repair_cluster1); reg |= req; - write32(reg, &flow->ram_repair_cluster1); + writel(reg, &flow->ram_repair_cluster1); while ((read32(&flow->ram_repair_cluster1) & sts) != sts) ; @@ -169,11 +169,11 @@ void ccplex_cpu_prepare(void) static void start_common_clocks(void) { /* Clear fast CPU partition reset. */ - write32(CRC_RST_CPUG_CLR_NONCPU, CLK_RST_REG(rst_cpug_cmplx_clr)); + writel(CRC_RST_CPUG_CLR_NONCPU, CLK_RST_REG(rst_cpug_cmplx_clr)); /* Clear reset of L2 and CoreSight components. */ - write32(CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG, - CLK_RST_REG(rst_cpug_cmplx_clr)); + writel(CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG, + CLK_RST_REG(rst_cpug_cmplx_clr)); } void ccplex_cpu_start(void *entry_addr) diff --git a/src/soc/nvidia/tegra132/clock.c b/src/soc/nvidia/tegra132/clock.c index 661d38a55d..4cd8a5886d 100644 --- a/src/soc/nvidia/tegra132/clock.c +++ b/src/soc/nvidia/tegra132/clock.c @@ -186,11 +186,11 @@ void clock_init_arm_generic_timer(void) set_cntfrq(freq); /* Record the system timer frequency. */ - write32(freq, &sysctr->cntfid0); + writel(freq, &sysctr->cntfid0); /* Enable the system counter. */ uint32_t cntcr = read32(&sysctr->cntcr); cntcr |= SYSCTR_CNTCR_EN | SYSCTR_CNTCR_HDBG; - write32(cntcr, &sysctr->cntcr); + writel(cntcr, &sysctr->cntcr); } #define SOR0_CLK_SEL0 (1 << 14) @@ -243,25 +243,14 @@ static void init_utmip_pll(void) clrbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */ udelay(1); - write32(80 << 16 | /* (rst) phy_divn */ - 1 << 8 | /* (rst) phy_divm */ - 0, CLK_RST_REG(utmip_pll_cfg0));/* 960MHz * 1 / 80 == 12 MHz */ + writel(80 << 16 | 1 << 8 | 0, CLK_RST_REG(utmip_pll_cfg0));/* 960MHz * 1 / 80 == 12 MHz */ - write32(div_round_up(khz, 8000) << 27 | /* pllu_enbl_cnt / 8 (1us) */ - 0 << 16 | /* PLLU pwrdn */ - 0 << 14 | /* pll_enable pwrdn */ - 0 << 12 | /* pll_active pwrdn */ - div_round_up(khz, 102) << 0 | /* phy_stbl_cnt / 256 (2.5ms) */ - 0, CLK_RST_REG(utmip_pll_cfg1)); + writel(div_round_up(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | div_round_up(khz, 102) << 0 | 0, + CLK_RST_REG(utmip_pll_cfg1)); /* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */ - write32(0 << 24 | /* SAMP_D/XDEV pwrdn */ - div_round_up(khz, 3200) << 18 | /* phy_actv_cnt / 16 (5us) */ - div_round_up(khz, 256) << 6 | /* pllu_stbl_cnt / 256 (1ms) */ - 0 << 4 | /* SAMP_C/USB3 pwrdn */ - 0 << 2 | /* SAMP_B/XHOST pwrdn */ - 0 << 0 | /* SAMP_A/USBD pwrdn */ - 0, CLK_RST_REG(utmip_pll_cfg2)); + writel(0 << 24 | div_round_up(khz, 3200) << 18 | div_round_up(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0, + CLK_RST_REG(utmip_pll_cfg2)); setbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */ } @@ -398,9 +387,8 @@ u32 clock_configure_plld(u32 frequency) * been determined through trial and error (must lead to div 13 at 24MHz). */ void clock_early_uart(void) { - write32(CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT | - CLK_UART_DIV_OVERRIDE | - CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900), CLK_RST_REG(clk_src_uarta)); + writel(CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900), + CLK_RST_REG(clk_src_uarta)); clock_enable_clear_reset_l(CLK_L_UARTA); } @@ -503,8 +491,8 @@ void clock_cpu0_config(void) */ do { if (readl(&clst_clk->misc_ctrl) & CLK_SWITCH_MATCH) { - write32((CC_CCLK_BRST_POL_PLLX_OUT0_LJ << 28), - &clst_clk->cclk_brst_pol); + writel((CC_CCLK_BRST_POL_PLLX_OUT0_LJ << 28), + &clst_clk->cclk_brst_pol); break; } @@ -524,9 +512,8 @@ void clock_cpu0_config(void) void clock_halt_avp(void) { for (;;) - write32(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | - FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT, - &flow->halt_cop_events); + writel(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT, + &flow->halt_cop_events); } void clock_init(void) @@ -542,13 +529,12 @@ void clock_init(void) /* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA * features section in the TRM). */ - write32(1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT, - CLK_RST_REG(clk_sys_rate)); /* pclk = hclk = sclk/2 */ - write32(CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_CLKEN | PLL_OUT_RSTN, CLK_RST_REG(pllc_out)); - write32(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | - SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT, - CLK_RST_REG(sclk_brst_pol)); /* sclk = 300 MHz */ + writel(1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT, + CLK_RST_REG(clk_sys_rate)); /* pclk = hclk = sclk/2 */ + writel(CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN, + CLK_RST_REG(pllc_out)); + writel(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT, + CLK_RST_REG(sclk_brst_pol)); /* sclk = 300 MHz */ /* Change the oscillator drive strength (from U-Boot -- why?) */ clrsetbits_le32(CLK_RST_REG(osc_ctrl), OSC_XOFS_MASK, @@ -563,16 +549,10 @@ void clock_init(void) OSC_DRIVE_STRENGTH << PMC_OSC_EDPD_OVER_XOFS_SHIFT); /* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */ - write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | - (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT, - CLK_RST_REG(pllp_outa)); - write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | - (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | - PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT, - CLK_RST_REG(pllp_outb)); + writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT, + CLK_RST_REG(pllp_outa)); + writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT, + CLK_RST_REG(pllp_outb)); /* init pllu */ init_pll(CLK_RST_REG(pllu_base), CLK_RST_REG(pllu_misc), diff --git a/src/soc/nvidia/tegra132/cpu.c b/src/soc/nvidia/tegra132/cpu.c index c79bc9cf4e..8cd2c0faea 100644 --- a/src/soc/nvidia/tegra132/cpu.c +++ b/src/soc/nvidia/tegra132/cpu.c @@ -40,15 +40,15 @@ static void enable_core_clocks(int cpu) /* Clear reset of CPU components. */ if (cpu == 0) - write32(cpu0_clocks, CLK_RST_REG(rst_cpug_cmplx_clr)); + writel(cpu0_clocks, CLK_RST_REG(rst_cpug_cmplx_clr)); else - write32(cpu1_clocks, CLK_RST_REG(rst_cpug_cmplx_clr)); + writel(cpu1_clocks, CLK_RST_REG(rst_cpug_cmplx_clr)); } static void set_armv8_32bit_reset_vector(uintptr_t entry) { void * const evp_cpu_reset_vector = EVP_CPU_RESET_VECTOR; - write32(entry, evp_cpu_reset_vector); + writel(entry, evp_cpu_reset_vector); } static void set_armv8_64bit_reset_vector(uintptr_t entry) @@ -56,8 +56,8 @@ static void set_armv8_64bit_reset_vector(uintptr_t entry) struct tegra_pmc_regs * const pmc = PMC_REGS; /* Currently assume 32-bit addresses only. */ - write32(entry, &pmc->secure_scratch34); - write32(0, &pmc->secure_scratch35); + writel(entry, &pmc->secure_scratch34); + writel(0, &pmc->secure_scratch35); } void cpu_prepare_startup(void *entry_64) diff --git a/src/soc/nvidia/tegra132/dsi.c b/src/soc/nvidia/tegra132/dsi.c index 188792bd2c..8508b6666d 100644 --- a/src/soc/nvidia/tegra132/dsi.c +++ b/src/soc/nvidia/tegra132/dsi.c @@ -869,7 +869,7 @@ static int dsi_enable(struct soc_nvidia_tegra132_config *config) tegra_output_dsi_setup_clock(dsi_a, config); /* configure APB_MISC_GP_MIPI_PAD_CTRL_0 */ - write32(DSIB_MODE_DSI, (unsigned int *)APB_MISC_GP_MIPI_PAD_CTRL_0); + writel(DSIB_MODE_DSI, (unsigned int *)APB_MISC_GP_MIPI_PAD_CTRL_0); /* configure phy interface timing registers */ tegra_dsi_set_phy_timing(dsi_a); diff --git a/src/soc/nvidia/tegra132/flow_ctrl.c b/src/soc/nvidia/tegra132/flow_ctrl.c index 4da54b1ea1..6d7d11590c 100644 --- a/src/soc/nvidia/tegra132/flow_ctrl.c +++ b/src/soc/nvidia/tegra132/flow_ctrl.c @@ -62,7 +62,7 @@ static uint32_t flowctrl_read_cpu_csr(int cpu) static void flowctrl_write_cpu_csr(int cpu, uint32_t val) { - write32(val, tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]); + writel(val, tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]); val = readl(tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]); } diff --git a/src/soc/nvidia/tegra132/i2c6.c b/src/soc/nvidia/tegra132/i2c6.c index 73a98562ad..ef86126935 100644 --- a/src/soc/nvidia/tegra132/i2c6.c +++ b/src/soc/nvidia/tegra132/i2c6.c @@ -43,7 +43,7 @@ static void remove_clamps(int id) return; /* Remove clamp */ - write32((1 << id), &pmc->remove_clamping_cmd); + writel((1 << id), &pmc->remove_clamping_cmd); /* Wait for clamp off */ while (partition_clamp_on(id)) @@ -86,7 +86,7 @@ void soc_configure_i2c6pad(void) soc_configure_host1x(); /* Now we can write the I2C6 mux in DPAUX */ - write32(I2C6_PADCTL, (void *)DPAUX_HYBRID_PADCTL); + writel(I2C6_PADCTL, (void *)DPAUX_HYBRID_PADCTL); /* * Delay before turning off Host1X/DPAUX clocks. diff --git a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c index a52e918ee0..29fb9dedd6 100644 --- a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c +++ b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c @@ -261,17 +261,17 @@ inline static void write32(uint32_t val, void *addr) inline static void setbits32(uint32_t bits, void *addr) { - write32(read32(addr) | bits, addr); + writel(read32(addr) | bits, addr); } inline static void clrbits32(uint32_t bits, void *addr) { - write32(read32(addr) & ~bits, addr); + writel(read32(addr) & ~bits, addr); } static void __attribute__((noreturn)) reset(void) { - write32(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr); + writel(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr); halt(); } @@ -370,18 +370,18 @@ static void enable_uart(void) clrbits32(uart_mask, uart_rst_reg); /* Program UART clock source: PLLP (408000000) */ - write32(0, uart_clk_source); + writel(0, uart_clk_source); /* Program 115200n8 to the uart port */ /* baud-rate of 115200 */ - write32(LCR_DLAB, (uart_base + UART_LCR)); - write32((UART_RATE_115200 & 0xff), (uart_base + UART_THR_DLAB)); - write32((UART_RATE_115200 >> 8), (uart_base + UART_IER_DLAB)); + writel(LCR_DLAB, (uart_base + UART_LCR)); + writel((UART_RATE_115200 & 0xff), (uart_base + UART_THR_DLAB)); + writel((UART_RATE_115200 >> 8), (uart_base + UART_IER_DLAB)); /* 8-bit and no parity */ - write32(LCR_WD_SIZE_8, (uart_base + UART_LCR)); + writel(LCR_WD_SIZE_8, (uart_base + UART_LCR)); /* enable and clear RX/TX FIFO */ - write32((FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO), - (uart_base + UART_IIR_FCR)); + writel((FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO), + (uart_base + UART_IIR_FCR)); } /* Accessors. */ @@ -401,7 +401,7 @@ static unsigned get_osc_freq(void) static void enable_jtag(void) { - write32(PP_CONFIG_CTL_JTAG, misc_pp_config_ctl_ptr); + writel(PP_CONFIG_CTL_JTAG, misc_pp_config_ctl_ptr); } /* Clock configuration. */ @@ -417,7 +417,7 @@ static void config_oscillator(void) osc_ctrl &= ~OSC_XOFS_MASK; osc_ctrl |= (xofs << OSC_XOFS_SHIFT); osc_ctrl |= OSC_XOE; - write32(osc_ctrl, clk_rst_osc_ctrl_ptr); + writel(osc_ctrl, clk_rst_osc_ctrl_ptr); } static void config_pllu(void) @@ -462,24 +462,24 @@ static void config_pllu(void) // Configure PLLU. uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE | (divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT); - write32(base, clk_rst_pllu_base_ptr); + writel(base, clk_rst_pllu_base_ptr); uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) | (lfcon << PLLU_LFCON_SHIFT); - write32(misc, clk_rst_pllu_misc_ptr); + writel(misc, clk_rst_pllu_misc_ptr); // Enable PLLU. base &= ~PLLU_BYPASS; base |= PLLU_ENABLE; - write32(base, clk_rst_pllu_base_ptr); + writel(base, clk_rst_pllu_base_ptr); misc |= PLLU_LOCK_ENABLE; - write32(misc, clk_rst_pllu_misc_ptr); + writel(misc, clk_rst_pllu_misc_ptr); } static void enable_cpu_clocks(void) { // Enable the CPU complex clock. - write32(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr); - write32(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr); + writel(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr); + writel(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr); } @@ -489,7 +489,7 @@ static void enable_cpu_clocks(void) static void config_core_sight(void) { // Enable the CoreSight clock. - write32(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr); + writel(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr); /* * De-assert CoreSight reset. @@ -497,7 +497,7 @@ static void config_core_sight(void) * now. It will be restored to its original clock source * when the CPU-side restoration code runs. */ - write32(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr); + writel(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr); } @@ -508,11 +508,11 @@ static void clear_cpu_resets(void) /* Hold CPU1 in reset */ setbits32(SET_CXRESET1, clk_rst_rst_cpulp_cmplx_set_ptr); - write32(CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG, - clk_rst_rst_cpug_cmplx_clr_ptr); + writel(CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG, + clk_rst_rst_cpug_cmplx_clr_ptr); - write32(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0, - clk_rst_rst_cpug_cmplx_clr_ptr); + writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0, + clk_rst_rst_cpug_cmplx_clr_ptr); } @@ -542,7 +542,7 @@ static void power_on_partition(unsigned id) uint32_t bit = 0x1 << id; if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) { // Partition is not on. Turn it on. - write32(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr); + writel(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr); // Wait until the partition is powerd on. while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) @@ -572,15 +572,15 @@ static void power_on_main_cpu(void) */ uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr); - write32(orig_timer * (204000000 / 32768), - pmc_ctlr_cpupwrgood_timer_ptr); + writel(orig_timer * (204000000 / 32768), + pmc_ctlr_cpupwrgood_timer_ptr); power_on_partition(PARTID_CRAIL); power_on_partition(PARTID_C0NC); power_on_partition(PARTID_CE0); // Restore the original PMC_CPUPWRGOOD_TIMER. - write32(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr); + writel(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr); } @@ -609,7 +609,7 @@ void lp0_resume(void) config_oscillator(); // Program SUPER_CCLK_DIVIDER. - write32(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr); + writel(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr); config_core_sight(); @@ -623,12 +623,12 @@ void lp0_resume(void) * T132 always resets to AARCH32 and SW needs to write RMR_EL3 * to bootstrap into AARCH64. */ - write32(get_wakeup_vector(), pmc_ctlr_secure_scratch34_ptr); - write32(0, pmc_ctlr_secure_scratch35_ptr); - write32((uint32_t)aarch64_trampoline, evp_cpu_reset_ptr); + writel(get_wakeup_vector(), pmc_ctlr_secure_scratch34_ptr); + writel(0, pmc_ctlr_secure_scratch35_ptr); + writel((uint32_t)aarch64_trampoline, evp_cpu_reset_ptr); // Select CPU complex clock source. - write32(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr); + writel(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr); // Disable PLLX since it isn't used as CPU clock source. clrbits32(PLLX_ENABLE, clk_rst_pllx_base_ptr); @@ -637,12 +637,12 @@ void lp0_resume(void) uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr); ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK; ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT; - write32(ack_width, clk_rst_cpu_softrst_ctrl2_ptr); + writel(ack_width, clk_rst_cpu_softrst_ctrl2_ptr); // Disable VPR. - write32(0, mc_video_protect_size_mb_ptr); - write32(VIDEO_PROTECT_WRITE_ACCESS_DISABLE, - mc_video_protect_reg_ctrl_ptr); + writel(0, mc_video_protect_size_mb_ptr); + writel(VIDEO_PROTECT_WRITE_ACCESS_DISABLE, + mc_video_protect_reg_ctrl_ptr); enable_cpu_clocks(); @@ -655,8 +655,8 @@ void lp0_resume(void) // Halt the AVP. while (1) - write32(FLOW_MODE_STOP | EVENT_JTAG, - flow_ctlr_halt_cop_events_ptr); + writel(FLOW_MODE_STOP | EVENT_JTAG, + flow_ctlr_halt_cop_events_ptr); } diff --git a/src/soc/nvidia/tegra132/padconfig.c b/src/soc/nvidia/tegra132/padconfig.c index 5f7f2e4f93..790f10f9c0 100644 --- a/src/soc/nvidia/tegra132/padconfig.c +++ b/src/soc/nvidia/tegra132/padconfig.c @@ -36,7 +36,7 @@ static inline uint32_t pad_get_pinmux(int index) static inline void pad_set_pinmux(int index, uint32_t reg) { - return write32(reg, &pinmux_regs[index]); + return writel(reg, &pinmux_regs[index]); } static inline void pad_set_gpio_out(int gpio_index, int val) @@ -45,10 +45,10 @@ static inline void pad_set_gpio_out(int gpio_index, int val) int port = gpio_index_to_port(gpio_index); int bit = gpio_to_bit(gpio_index); - write32((1 << (bit + GPIO_GPIOS_PER_PORT)) | (val << bit), - ®s->out_value_mask[port]); - write32((1 << (bit + GPIO_GPIOS_PER_PORT)) | (1 << bit), - ®s->out_enable_mask[port]); + writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (val << bit), + ®s->out_value_mask[port]); + writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (1 << bit), + ®s->out_enable_mask[port]); } static inline void pad_set_mode(int gpio_index, int sfio_or_gpio) @@ -57,8 +57,8 @@ static inline void pad_set_mode(int gpio_index, int sfio_or_gpio) int port = gpio_index_to_port(gpio_index); int bit = gpio_to_bit(gpio_index); - write32((1 << (bit + GPIO_GPIOS_PER_PORT)) | (sfio_or_gpio << bit), - ®s->config_mask[port]); + writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (sfio_or_gpio << bit), + ®s->config_mask[port]); } static inline void pad_set_gpio_mode(int gpio_index) diff --git a/src/soc/nvidia/tegra132/power.c b/src/soc/nvidia/tegra132/power.c index 4316d763db..0ebfd7c53e 100644 --- a/src/soc/nvidia/tegra132/power.c +++ b/src/soc/nvidia/tegra132/power.c @@ -41,7 +41,7 @@ void power_ungate_partition(uint32_t id) pwrgate_toggle &= ~(PMC_PWRGATE_TOGGLE_PARTID_MASK); pwrgate_toggle |= (id << PMC_PWRGATE_TOGGLE_PARTID_SHIFT); pwrgate_toggle |= PMC_PWRGATE_TOGGLE_START; - write32(pwrgate_toggle, &pmc->pwrgate_toggle); + writel(pwrgate_toggle, &pmc->pwrgate_toggle); /* Wait for the request to be accepted. */ while (read32(&pmc->pwrgate_toggle) & PMC_PWRGATE_TOGGLE_START) diff --git a/src/soc/nvidia/tegra132/soc.c b/src/soc/nvidia/tegra132/soc.c index 476dec7a03..7923f7e3cd 100644 --- a/src/soc/nvidia/tegra132/soc.c +++ b/src/soc/nvidia/tegra132/soc.c @@ -83,9 +83,9 @@ static void lock_down_vpr(void) { struct tegra_mc_regs *regs = (void *)(uintptr_t)TEGRA_MC_BASE; - write32(0, ®s->video_protect_bom); - write32(0, ®s->video_protect_size_mb); - write32(1, ®s->video_protect_reg_ctrl); + writel(0, ®s->video_protect_bom); + writel(0, ®s->video_protect_size_mb); + writel(1, ®s->video_protect_reg_ctrl); } static void soc_init(device_t dev) diff --git a/src/soc/nvidia/tegra132/spi.c b/src/soc/nvidia/tegra132/spi.c index 0bff31a245..e240700f06 100644 --- a/src/soc/nvidia/tegra132/spi.c +++ b/src/soc/nvidia/tegra132/spi.c @@ -230,7 +230,7 @@ int spi_claim_bus(struct spi_slave *slave) else val |= SPI_CMD1_CS_SW_VAL; - write32(val, ®s->command1); + writel(val, ®s->command1); return 0; } @@ -246,7 +246,7 @@ void spi_release_bus(struct spi_slave *slave) else val &= ~SPI_CMD1_CS_SW_VAL; - write32(val, ®s->command1); + writel(val, ®s->command1); } static void dump_fifo_status(struct tegra_spi_channel *spi) @@ -383,12 +383,12 @@ static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi, /* BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and * PIO transfers */ - write32(todo - 1, &spi->regs->dma_blk); + writel(todo - 1, &spi->regs->dma_blk); if (dir == SPI_SEND) { unsigned int to_fifo = bytes; while (to_fifo) { - write32(*p, &spi->regs->tx_fifo); + writel(*p, &spi->regs->tx_fifo); p++; to_fifo--; } @@ -493,11 +493,12 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi, /* ensure bytes to send will be visible to DMA controller */ dcache_clean_by_mva(spi->out_buf, bytes); - write32((uintptr_t)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr); - write32((uintptr_t)spi->out_buf, &spi->dma_out->regs->ahb_ptr); + writel((uintptr_t) & spi->regs->tx_fifo, + &spi->dma_out->regs->apb_ptr); + writel((uintptr_t)spi->out_buf, &spi->dma_out->regs->ahb_ptr); setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR); setup_dma_params(spi, spi->dma_out); - write32(wcount, &spi->dma_out->regs->wcount); + writel(wcount, &spi->dma_out->regs->wcount); } else { spi->dma_in = dma_claim(); if (!spi->dma_in) @@ -506,15 +507,16 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi, /* avoid data collisions */ dcache_clean_invalidate_by_mva(spi->in_buf, bytes); - write32((uintptr_t)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr); - write32((uintptr_t)spi->in_buf, &spi->dma_in->regs->ahb_ptr); + writel((uintptr_t)&spi->regs->rx_fifo, + &spi->dma_in->regs->apb_ptr); + writel((uintptr_t)spi->in_buf, &spi->dma_in->regs->ahb_ptr); clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR); setup_dma_params(spi, spi->dma_in); - write32(wcount, &spi->dma_in->regs->wcount); + writel(wcount, &spi->dma_in->regs->wcount); } /* BLOCK_SIZE starts at n-1 */ - write32(todo - 1, &spi->regs->dma_blk); + writel(todo - 1, &spi->regs->dma_blk); return todo; } diff --git a/src/soc/nvidia/tegra132/uart.c b/src/soc/nvidia/tegra132/uart.c index 3a9ac22584..90765e1496 100644 --- a/src/soc/nvidia/tegra132/uart.c +++ b/src/soc/nvidia/tegra132/uart.c @@ -63,20 +63,19 @@ static void tegra132_uart_init(struct tegra132_uart *uart_ptr) tegra132_uart_tx_flush(uart_ptr); // Disable interrupts. - write8(0, &uart_ptr->ier); + writeb(0, &uart_ptr->ier); // Force DTR and RTS to high. - write8(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr); + writeb(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr); // Set line configuration, access divisor latches. - write8(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr); + writeb(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr); // Set the divisor. - write8(divisor & 0xff, &uart_ptr->dll); - write8((divisor >> 8) & 0xff, &uart_ptr->dlm); + writeb(divisor & 0xff, &uart_ptr->dll); + writeb((divisor >> 8) & 0xff, &uart_ptr->dlm); // Hide the divisor latches. - write8(line_config, &uart_ptr->lcr); + writeb(line_config, &uart_ptr->lcr); // Enable FIFOs, and clear receive and transmit. - write8(UART8250_FCR_FIFO_EN | - UART8250_FCR_CLEAR_RCVR | - UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr); + writeb(UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT, + &uart_ptr->fcr); } static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr) @@ -89,7 +88,7 @@ static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr) static void tegra132_uart_tx_byte(struct tegra132_uart *uart_ptr, unsigned char data) { while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE)); - write8(data, &uart_ptr->thr); + writeb(data, &uart_ptr->thr); } static void tegra132_uart_tx_flush(struct tegra132_uart *uart_ptr) diff --git a/src/soc/qualcomm/ipq806x/clock.c b/src/soc/qualcomm/ipq806x/clock.c index fe7cfb83a8..0b770da94f 100644 --- a/src/soc/qualcomm/ipq806x/clock.c +++ b/src/soc/qualcomm/ipq806x/clock.c @@ -126,22 +126,17 @@ void nand_clock_config(void) void usb_clock_config(void) { /* Magic clock initialization numbers, nobody knows how they work... */ - write32(0x10, USB30_MASTER_CLK_CTL_REG); - write32(0x10, USB30_1_MASTER_CLK_CTL_REG); - write32(0x500DF, USB30_MASTER_CLK_MD); - write32(0xE40942, USB30_MASTER_CLK_NS); - write32(0x100D7, USB30_MOC_UTMI_CLK_MD); - write32(0xD80942, USB30_MOC_UTMI_CLK_NS); - write32(0x10, USB30_MOC_UTMI_CLK_CTL); - write32(0x10, USB30_1_MOC_UTMI_CLK_CTL); - - write32(1 << 5 | /* assert port2 HS PHY async reset */ - 1 << 4 | /* assert master async reset */ - 1 << 3 | /* assert sleep async reset */ - 1 << 2 | /* assert MOC UTMI async reset */ - 1 << 1 | /* assert power-on async reset */ - 1 << 0 | /* assert PHY async reset */ - 0, USB30_RESET); + writel(0x10, USB30_MASTER_CLK_CTL_REG); + writel(0x10, USB30_1_MASTER_CLK_CTL_REG); + writel(0x500DF, USB30_MASTER_CLK_MD); + writel(0xE40942, USB30_MASTER_CLK_NS); + writel(0x100D7, USB30_MOC_UTMI_CLK_MD); + writel(0xD80942, USB30_MOC_UTMI_CLK_NS); + writel(0x10, USB30_MOC_UTMI_CLK_CTL); + writel(0x10, USB30_1_MOC_UTMI_CLK_CTL); + + writel(1 << 5 | 1 << 4 | 1 << 3 | 1 << 2 | 1 << 1 | 1 << 0 | 0, + USB30_RESET); udelay(5); - write32(0, USB30_RESET); /* deassert all USB resets again */ + writel(0, USB30_RESET); /* deassert all USB resets again */ } diff --git a/src/soc/qualcomm/ipq806x/usb.c b/src/soc/qualcomm/ipq806x/usb.c index fb89373953..69b3998624 100644 --- a/src/soc/qualcomm/ipq806x/usb.c +++ b/src/soc/qualcomm/ipq806x/usb.c @@ -101,33 +101,16 @@ static struct usb_dwc3 * const usb_host2_dwc3 = (void *)USB_HOST2_DWC3_BASE; static void setup_dwc3(struct usb_dwc3 *dwc3) { - write32(0x1 << 31 | /* assert PHY soft reset */ - 0x1 << 25 | /* (default) U1/U2 exit fail -> recovery? */ - 0x1 << 24 | /* (default) activate PHY low power states */ - 0x1 << 19 | /* (default) PHY low power delay value */ - 0x1 << 18 | /* (default) activate PHY low power delay */ - 0x1 << 1 | /* (default) Tx deemphasis value */ - 0x1 << 0 | /* (default) elastic buffer mode */ - 0, &dwc3->usb3pipectl); - - write32(0x1 << 31 | /* assert PHY soft reset */ - 0x9 << 10 | /* (default) PHY clock turnaround 8-bit UTMI+ */ - 0x1 << 8 | /* (default) enable PHY sleep in L1 */ - 0x1 << 6 | /* (default) enable PHY suspend */ - 0, &dwc3->usb2phycfg); - - write32(0x2 << 19 | /* (default) suspend clock scaling */ - 0x1 << 16 | /* retry SS three times before HS downgrade */ - 0x1 << 12 | /* port capability HOST */ - 0x1 << 11 | /* assert core soft reset */ - 0x1 << 10 | /* (default) sync ITP to refclk */ - 0x1 << 2 | /* U2 exit after 8us LFPS (instead of 248ns) */ - 0, &dwc3->ctl); - - write32(0x32 << 22 | /* (default) reference clock period in ns */ - 0x1 << 15 | /* (default) XHCI compliant device addressing */ - 0x10 << 0 | /* (default) devices time out after 32us */ - 0, &dwc3->uctl); + writel(0x1 << 31 | 0x1 << 25 | 0x1 << 24 | 0x1 << 19 | 0x1 << 18 | 0x1 << 1 | 0x1 << 0 | 0, + &dwc3->usb3pipectl); + + writel(0x1 << 31 | 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0, + &dwc3->usb2phycfg); + + writel(0x2 << 19 | 0x1 << 16 | 0x1 << 12 | 0x1 << 11 | 0x1 << 10 | 0x1 << 2 | 0, + &dwc3->ctl); + + writel(0x32 << 22 | 0x1 << 15 | 0x10 << 0 | 0, &dwc3->uctl); udelay(5); @@ -138,34 +121,16 @@ static void setup_dwc3(struct usb_dwc3 *dwc3) static void setup_phy(struct usb_qc_phy *phy) { - write32(0x1 << 24 | /* Indicate VBUS power present */ - 0x1 << 8 | /* Enable USB3 ref clock to prescaler */ - 0x1 << 7 | /* assert SS PHY reset */ - 0x19 << 0 | /* (default) reference clock multiplier */ - 0, &phy->ss_phy_ctrl); - - write32(0x1 << 26 | /* (default) unclamp DPSE/DMSE VLS */ - 0x1 << 25 | /* (default) select freeclk for utmi_clk */ - 0x1 << 24 | /* (default) unclamp DMSE VLS */ - 0x1 << 21 | /* (default) enable UTMI clock */ - 0x1 << 20 | /* set OTG VBUS as valid */ - 0x1 << 18 | /* use ref clock from core */ - 0x1 << 17 | /* (default) unclamp DPSE VLS */ - 0x1 << 11 | /* force xo/bias/pll to stay on in suspend */ - 0x1 << 9 | /* (default) unclamp IDHV */ - 0x1 << 8 | /* (default) unclamp VLS (again???) */ - 0x1 << 7 | /* (default) unclamp HV VLS */ - 0x7 << 4 | /* select frequency (no idea which one) */ - 0x1 << 1 | /* (default) "retention enable" */ - 0, &phy->hs_phy_ctrl); - - write32(0x6e << 20 | /* full TX swing amplitude */ - 0x20 << 14 | /* (default) 6dB TX deemphasis */ - 0x17 << 8 | /* 3.5dB TX deemphasis */ - 0x9 << 3 | /* (default) LoS detector level */ - 0, &phy->ss_phy_param1); - - write32(0x1 << 2, &phy->general_cfg); /* set XHCI 1.00 compliance */ + writel(0x1 << 24 | 0x1 << 8 | 0x1 << 7 | 0x19 << 0 | 0, + &phy->ss_phy_ctrl); + + writel(0x1 << 26 | 0x1 << 25 | 0x1 << 24 | 0x1 << 21 | 0x1 << 20 | 0x1 << 18 | 0x1 << 17 | 0x1 << 11 | 0x1 << 9 | 0x1 << 8 | 0x1 << 7 | 0x7 << 4 | 0x1 << 1 | 0, + &phy->hs_phy_ctrl); + + writel(0x6e << 20 | 0x20 << 14 | 0x17 << 8 | 0x9 << 3 | 0, + &phy->ss_phy_param1); + + writel(0x1 << 2, &phy->general_cfg); /* set XHCI 1.00 compliance */ udelay(5); clrbits_le32(&phy->ss_phy_ctrl, 0x1 << 7); /* deassert SS PHY reset */ @@ -176,9 +141,9 @@ static void crport_handshake(void *capture_reg, void *acknowledge_bit, u32 data) int usec = 100; if (capture_reg) - write32(data, capture_reg); + writel(data, capture_reg); - write32(0x1 << 0, acknowledge_bit); + writel(0x1 << 0, acknowledge_bit); while (read32(acknowledge_bit) && --usec) udelay(1); diff --git a/src/soc/rockchip/rk3288/crypto.c b/src/soc/rockchip/rk3288/crypto.c index 60bfa42451..20fd60a474 100644 --- a/src/soc/rockchip/rk3288/crypto.c +++ b/src/soc/rockchip/rk3288/crypto.c @@ -80,17 +80,17 @@ int vb2ex_hwcrypto_digest_init(enum vb2_hash_algorithm hash_alg, return VB2_ERROR_EX_HWCRYPTO_UNSUPPORTED; } - write32(RK_SETBITS(1 << 6), &crypto->ctrl); /* Assert HASH_FLUSH */ + writel(RK_SETBITS(1 << 6), &crypto->ctrl); /* Assert HASH_FLUSH */ udelay(1); /* for 10+ cycles to */ - write32(RK_CLRBITS(1 << 6), &crypto->ctrl); /* clear out old hash */ + writel(RK_CLRBITS(1 << 6), &crypto->ctrl); /* clear out old hash */ /* Enable DMA byte swapping for little-endian bus (Byteswap_??FIFO) */ - write32(1 << 5 | 1 << 4 | 1 << 3, &crypto->conf); + writel(1 << 5 | 1 << 4 | 1 << 3, &crypto->conf); - write32(HRDMA_ERR | HRDMA_DONE, &crypto->intena); /* enable interrupt */ + writel(HRDMA_ERR | HRDMA_DONE, &crypto->intena); /* enable interrupt */ - write32(data_size, &crypto->hash_msg_len); /* program total size */ - write32(1 << 3 | 0x2, &crypto->hash_ctrl); /* swap DOUT, SHA256 */ + writel(data_size, &crypto->hash_msg_len); /* program total size */ + writel(1 << 3 | 0x2, &crypto->hash_ctrl); /* swap DOUT, SHA256 */ printk(BIOS_DEBUG, "Initialized RK3288 HW crypto for %u byte SHA256\n", data_size); @@ -101,12 +101,12 @@ int vb2ex_hwcrypto_digest_extend(const uint8_t *buf, uint32_t size) { uint32_t intsts; - write32(HRDMA_ERR | HRDMA_DONE, &crypto->intsts); /* clear interrupts */ + writel(HRDMA_ERR | HRDMA_DONE, &crypto->intsts); /* clear interrupts */ /* NOTE: This assumes that the DMA is reading from uncached SRAM. */ - write32((uint32_t)buf, &crypto->hrdmas); - write32(size / sizeof(uint32_t), &crypto->hrdmal); - write32(RK_SETBITS(1 << 3), &crypto->ctrl); /* Set HASH_START */ + writel((uint32_t)buf, &crypto->hrdmas); + writel(size / sizeof(uint32_t), &crypto->hrdmal); + writel(RK_SETBITS(1 << 3), &crypto->ctrl); /* Set HASH_START */ do { intsts = read32(&crypto->intsts); if (intsts & HRDMA_ERR) { diff --git a/src/soc/rockchip/rk3288/timer.c b/src/soc/rockchip/rk3288/timer.c index 253d145b44..d373f7a39c 100644 --- a/src/soc/rockchip/rk3288/timer.c +++ b/src/soc/rockchip/rk3288/timer.c @@ -41,7 +41,7 @@ void timer_monotonic_get(struct mono_time *mt) void init_timer(void) { - write32(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count0); - write32(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count1); - write32(1, &timer7_ptr->timer_ctrl_reg); + writel(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count0); + writel(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count1); + writel(1, &timer7_ptr->timer_ctrl_reg); } diff --git a/src/soc/samsung/exynos5420/dmc_init_ddr3.c b/src/soc/samsung/exynos5420/dmc_init_ddr3.c index 802625f153..8186b6dbdf 100644 --- a/src/soc/samsung/exynos5420/dmc_init_ddr3.c +++ b/src/soc/samsung/exynos5420/dmc_init_ddr3.c @@ -189,8 +189,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset) * release pad retention and retain the memory content until the * initialization is complete. */ - write32(PAD_RETENTION_DRAM_COREBLK_VAL, - &exynos_power->padret_dram_cblk_opt); + writel(PAD_RETENTION_DRAM_COREBLK_VAL, + &exynos_power->padret_dram_cblk_opt); do { ret = read32(&exynos_power->padret_dram_status); } while (ret != 0x1); diff --git a/src/soc/samsung/exynos5420/dp_lowlevel.c b/src/soc/samsung/exynos5420/dp_lowlevel.c index 00fcb5c817..5a3adf907e 100644 --- a/src/soc/samsung/exynos5420/dp_lowlevel.c +++ b/src/soc/samsung/exynos5420/dp_lowlevel.c @@ -55,7 +55,7 @@ static inline unsigned long fradl(void *v) { #define lread32(a) fradl((void *)(a)) #else -#define lwrite32(a,b) write32((unsigned long)(a), (void *)(b)) +#define lwrite32(a,b) writel((unsigned long)(a), (void *)(b)) #define lread32(a) read32((void *)(a)) #endif diff --git a/src/soc/samsung/exynos5420/i2c.c b/src/soc/samsung/exynos5420/i2c.c index f1b7c6b5bb..28e3f0c331 100644 --- a/src/soc/samsung/exynos5420/i2c.c +++ b/src/soc/samsung/exynos5420/i2c.c @@ -430,7 +430,7 @@ static int hsi2c_senddata(struct hsi2c_regs *regs, const uint8_t *data, int len) { while (!hsi2c_check_transfer(regs) && len) { if (!(read32(®s->usi_fifo_stat) & Hsi2cTxFifoFull)) { - write32(*data++, ®s->usi_txdata); + writel(*data++, ®s->usi_txdata); len--; } } @@ -452,7 +452,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop) { const uint32_t usi_ctl = Hsi2cFuncModeI2c | Hsi2cMaster; - write32(HSI2C_SLV_ADDR_MAS(seg->chip), ®s->i2c_addr); + writel(HSI2C_SLV_ADDR_MAS(seg->chip), ®s->i2c_addr); /* * We really only want to stop after this transaction (I think) if the @@ -465,14 +465,14 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop) seg->len | Hsi2cMasterRun | Hsi2cStopAfterTrans; if (seg->read) { - write32(usi_ctl | Hsi2cRxchon, ®s->usi_ctl); - write32(autoconf | Hsi2cReadWrite, ®s->i2c_auto_conf); + writel(usi_ctl | Hsi2cRxchon, ®s->usi_ctl); + writel(autoconf | Hsi2cReadWrite, ®s->i2c_auto_conf); if (hsi2c_recvdata(regs, seg->buf, seg->len)) return -1; } else { - write32(usi_ctl | Hsi2cTxchon, ®s->usi_ctl); - write32(autoconf, ®s->i2c_auto_conf); + writel(usi_ctl | Hsi2cTxchon, ®s->usi_ctl); + writel(autoconf, ®s->i2c_auto_conf); if (hsi2c_senddata(regs, seg->buf, seg->len)) return -1; -- cgit v1.2.3