From bde6d309dfafe58732ec46314a2d4c08974b62d4 Mon Sep 17 00:00:00 2001 From: Kevin Paul Herbert Date: Wed, 24 Dec 2014 18:43:20 -0800 Subject: x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert Signed-off-by: Alexandru Gagniuc Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins) --- src/soc/intel/baytrail/acpi.c | 2 +- src/soc/intel/baytrail/baytrail/gpio.h | 22 +++++++-------- src/soc/intel/baytrail/gfx.c | 4 +-- src/soc/intel/baytrail/gpio.c | 16 +++++------ src/soc/intel/baytrail/hda.c | 6 ++-- src/soc/intel/baytrail/iosf.c | 4 +-- src/soc/intel/baytrail/lpe.c | 12 ++++---- src/soc/intel/baytrail/pmutil.c | 8 +++--- src/soc/intel/baytrail/romstage/romstage.c | 10 +++---- src/soc/intel/baytrail/sata.c | 2 +- src/soc/intel/baytrail/smm.c | 2 +- src/soc/intel/baytrail/southcluster.c | 30 ++++++++++---------- src/soc/intel/baytrail/spi.c | 18 ++++++------ src/soc/intel/broadwell/adsp.c | 7 +++-- src/soc/intel/broadwell/hda.c | 10 +++---- src/soc/intel/broadwell/igd.c | 4 +-- src/soc/intel/broadwell/lpc.c | 8 +++--- src/soc/intel/broadwell/me.c | 6 ++-- src/soc/intel/broadwell/minihd.c | 6 ++-- src/soc/intel/broadwell/sata.c | 7 +++-- src/soc/intel/broadwell/serialio.c | 36 ++++++++++++------------ src/soc/intel/broadwell/spi.c | 24 ++++++++-------- src/soc/intel/broadwell/xhci.c | 18 ++++++------ src/soc/intel/common/hda_verb.c | 12 ++++---- src/soc/intel/common/hda_verb.h | 6 ++-- src/soc/intel/fsp_baytrail/acpi.c | 2 +- src/soc/intel/fsp_baytrail/baytrail/baytrail.h | 5 +++- src/soc/intel/fsp_baytrail/baytrail/gpio.h | 16 +++++------ src/soc/intel/fsp_baytrail/bootblock/bootblock.c | 2 +- src/soc/intel/fsp_baytrail/gpio.c | 30 +++++++++++--------- src/soc/intel/fsp_baytrail/iosf.c | 4 +-- src/soc/intel/fsp_baytrail/pmutil.c | 8 +++--- src/soc/intel/fsp_baytrail/romstage/romstage.c | 16 +++++------ src/soc/intel/fsp_baytrail/smm.c | 2 +- src/soc/intel/fsp_baytrail/southcluster.c | 32 ++++++++++----------- src/soc/intel/fsp_baytrail/spi.c | 18 ++++++------ 36 files changed, 213 insertions(+), 202 deletions(-) (limited to 'src/soc') diff --git a/src/soc/intel/baytrail/acpi.c b/src/soc/intel/baytrail/acpi.c index aae0c9961a..cefc215db2 100644 --- a/src/soc/intel/baytrail/acpi.c +++ b/src/soc/intel/baytrail/acpi.c @@ -106,7 +106,7 @@ void acpi_init_gnvs(global_nvs_t *gnvs) static int acpi_sci_irq(void) { - const unsigned long actl = ILB_BASE_ADDRESS + ACTL; + u32 *actl = (u32 *)(ILB_BASE_ADDRESS + ACTL); int scis; static int sci_irq; diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h index 5071b09b79..d51d6e2983 100644 --- a/src/soc/intel/baytrail/baytrail/gpio.h +++ b/src/soc/intel/baytrail/baytrail/gpio.h @@ -387,15 +387,15 @@ struct soc_gpio_config* mainboard_get_gpios(void); #define PCU_SMB_DATA_PAD 90 #define SOC_DDI1_VDDEN_PAD 16 -static inline unsigned int ncore_pconf0(int pad_num) +static inline u32 *ncore_pconf0(int pad_num) { - return GPNCORE_PAD_BASE + pad_num * 16; + return (u32 *)(GPNCORE_PAD_BASE + pad_num * 16); } static inline void ncore_select_func(int pad, int func) { uint32_t reg; - uint32_t pconf0_addr = ncore_pconf0(pad); + u32 *pconf0_addr = ncore_pconf0(pad); reg = read32(pconf0_addr); reg &= ~0x7; @@ -403,20 +403,20 @@ static inline void ncore_select_func(int pad, int func) write32(pconf0_addr, reg); } -static inline unsigned int score_pconf0(int pad_num) +static inline u32 *score_pconf0(int pad_num) { - return GPSCORE_PAD_BASE + pad_num * 16; + return (u32 *)(GPSCORE_PAD_BASE + pad_num * 16); } -static inline unsigned int ssus_pconf0(int pad_num) +static inline u32 *ssus_pconf0(int pad_num) { - return GPSSUS_PAD_BASE + pad_num * 16; + return (u32 *)(GPSSUS_PAD_BASE + pad_num * 16); } static inline void score_select_func(int pad, int func) { uint32_t reg; - uint32_t pconf0_addr = score_pconf0(pad); + uint32_t *pconf0_addr = score_pconf0(pad); reg = read32(pconf0_addr); reg &= ~0x7; @@ -427,7 +427,7 @@ static inline void score_select_func(int pad, int func) static inline void ssus_select_func(int pad, int func) { uint32_t reg; - uint32_t pconf0_addr = ssus_pconf0(pad); + uint32_t *pconf0_addr = ssus_pconf0(pad); reg = read32(pconf0_addr); reg &= ~0x7; @@ -438,14 +438,14 @@ static inline void ssus_select_func(int pad, int func) /* These functions require that the input pad be configured as an input GPIO */ static inline int score_get_gpio(int pad) { - uint32_t val_addr = score_pconf0(pad) + PAD_VAL_REG; + uint32_t *val_addr = score_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t)); return read32(val_addr) & PAD_VAL_HIGH; } static inline int ssus_get_gpio(int pad) { - uint32_t val_addr = ssus_pconf0(pad) + PAD_VAL_REG; + uint32_t *val_addr = ssus_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t)); return read32(val_addr) & PAD_VAL_HIGH; } diff --git a/src/soc/intel/baytrail/gfx.c b/src/soc/intel/baytrail/gfx.c index 4cce87768d..5b57cc3d4f 100644 --- a/src/soc/intel/baytrail/gfx.c +++ b/src/soc/intel/baytrail/gfx.c @@ -59,7 +59,7 @@ static void gfx_lock_pcbase(device_t dev) pcbase += (gmsize-1) * wopcmsz - pcsize; pcbase |= 1; /* Lock */ - write32(res->base + 0x182120, pcbase); + write32((u32 *)(uintptr_t)(res->base + 0x182120), pcbase); } static const struct reg_script gfx_init_script[] = { @@ -308,7 +308,7 @@ static void set_backlight_pwm(device_t dev, uint32_t bklt_reg, int req_hz) divider = 25 * 1000 * 1000 / (16 * req_hz); /* Do not set duty cycle (lower 16 bits). Just set the divider. */ - write32(res->base + bklt_reg, divider << 16); + write32((u32 *)(uintptr_t)(res->base + bklt_reg), divider << 16); } static void gfx_panel_setup(device_t dev) diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c index 43e52ef9a0..6a971eac76 100644 --- a/src/soc/intel/baytrail/gpio.c +++ b/src/soc/intel/baytrail/gpio.c @@ -142,9 +142,9 @@ static void setup_gpios(const struct soc_gpio_map *gpios, reg, pad_conf0, config->pad_conf1, config->pad_val); #endif - write32(reg + PAD_CONF0_REG, pad_conf0); - write32(reg + PAD_CONF1_REG, config->pad_conf1); - write32(reg + PAD_VAL_REG, config->pad_val); + write32((u32 *)(reg + PAD_CONF0_REG), pad_conf0); + write32((u32 *)(reg + PAD_CONF1_REG), config->pad_conf1); + write32((u32 *)(reg + PAD_VAL_REG), config->pad_val); } if (bank->legacy_base != GP_LEGACY_BASE_NONE) @@ -198,7 +198,7 @@ static void setup_gpio_route(const struct soc_gpio_map *sus, static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], const struct gpio_bank *bank) { - u32 reg = bank->pad_base + PAD_BASE_DIRQ_OFFSET; + u32 *reg = (u32 *)(bank->pad_base + PAD_BASE_DIRQ_OFFSET); u32 val; int i; @@ -206,10 +206,10 @@ static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], for (i=0; i<4; ++i) { val = dirq[i * 4 + 3] << 24 | dirq[i * 4 + 2] << 16 | dirq[i * 4 + 1] << 8 | dirq[i * 4]; - write32(reg + i * 4, val); + write32(reg + i, val); #ifdef GPIO_DEBUG printk(BIOS_DEBUG, "Write DIRQ reg(%x) - %x\n", - reg + i * 4, val); + reg + i, val); #endif } } @@ -233,8 +233,8 @@ void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap) */ if (!enable_xdp_tap) { printk(BIOS_DEBUG, "Tri-state TDO and TMS\n"); - write32(GPSSUS_PAD_BASE + 0x2fc, 0xc); - write32(GPSSUS_PAD_BASE + 0x2cc, 0xc); + write32((u32 *)(GPSSUS_PAD_BASE + 0x2fc), 0xc); + write32((u32 *)(GPSSUS_PAD_BASE + 0x2cc), 0xc); } } diff --git a/src/soc/intel/baytrail/hda.c b/src/soc/intel/baytrail/hda.c index c5de654921..010150faad 100644 --- a/src/soc/intel/baytrail/hda.c +++ b/src/soc/intel/baytrail/hda.c @@ -83,6 +83,7 @@ static void hda_init(device_t dev) struct resource *res; int codec_mask; int i; + u8 *base; reg_script_run_on_dev(dev, init_ops); @@ -90,7 +91,8 @@ static void hda_init(device_t dev) if (res == NULL) return; - codec_mask = hda_codec_detect(res->base); + base = res2mmio(res, 0, 0); + codec_mask = hda_codec_detect(base); printk(BIOS_DEBUG, "codec mask = %x\n", codec_mask); if (!codec_mask) @@ -99,7 +101,7 @@ static void hda_init(device_t dev) for (i = 3; i >= 0; i--) { if (!((1 << i) & codec_mask)) continue; - hda_codec_init(res->base, i, sizeof(hdmi_codec_verb_table), + hda_codec_init(base, i, sizeof(hdmi_codec_verb_table), hdmi_codec_verb_table); } } diff --git a/src/soc/intel/baytrail/iosf.c b/src/soc/intel/baytrail/iosf.c index 2b07e2b844..0834f4b088 100644 --- a/src/soc/intel/baytrail/iosf.c +++ b/src/soc/intel/baytrail/iosf.c @@ -25,11 +25,11 @@ static inline void write_iosf_reg(int reg, uint32_t value) { - write32(IOSF_PCI_BASE + reg, value); + write32((u32 *)(IOSF_PCI_BASE + reg), value); } static inline uint32_t read_iosf_reg(int reg) { - return read32(IOSF_PCI_BASE + reg); + return read32((u32 *)(IOSF_PCI_BASE + reg)); } #else static inline void write_iosf_reg(int reg, uint32_t value) diff --git a/src/soc/intel/baytrail/lpe.c b/src/soc/intel/baytrail/lpe.c index 581f42bfa9..bc467ea3e3 100644 --- a/src/soc/intel/baytrail/lpe.c +++ b/src/soc/intel/baytrail/lpe.c @@ -90,7 +90,7 @@ static void lpe_enable_acpi_mode(device_t dev) static void setup_codec_clock(device_t dev) { uint32_t reg; - int clk_reg; + u32 *clk_reg; struct soc_intel_baytrail_config *config; const char *freq_str; @@ -119,8 +119,8 @@ static void setup_codec_clock(device_t dev) printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str); - clk_reg = PMC_BASE_ADDRESS + PLT_CLK_CTL_0; - clk_reg += 4 * config->lpe_codec_clk_num; + clk_reg = (u32 *)(PMC_BASE_ADDRESS + PLT_CLK_CTL_0); + clk_reg += config->lpe_codec_clk_num; write32(clk_reg, (read32(clk_reg) & ~0x7) | reg); } @@ -144,8 +144,10 @@ static void lpe_stash_firmware_info(device_t dev) /* C0 and later steppings use an offset in the MMIO space. */ if (pattrs->stepping >= STEP_C0) { mmio = find_resource(dev, PCI_BASE_ADDRESS_0); - write32(mmio->base + FIRMWARE_REG_BASE_C0, res->base); - write32(mmio->base + FIRMWARE_REG_LENGTH_C0, res->size); + write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0), + res->base); + write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0), + res->size); } } diff --git a/src/soc/intel/baytrail/pmutil.c b/src/soc/intel/baytrail/pmutil.c index aee37261be..8295b692b7 100644 --- a/src/soc/intel/baytrail/pmutil.c +++ b/src/soc/intel/baytrail/pmutil.c @@ -355,10 +355,10 @@ void clear_pmc_status(void) uint32_t prsts; uint32_t gen_pmcon1; - prsts = read32(PMC_BASE_ADDRESS + PRSTS); - gen_pmcon1 = read32(PMC_BASE_ADDRESS + GEN_PMCON1); + prsts = read32((u32 *)(PMC_BASE_ADDRESS + PRSTS)); + gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1)); /* Clear the status bits. The RPS field is cleared on a 0 write. */ - write32(PMC_BASE_ADDRESS + GEN_PMCON1, gen_pmcon1 & ~RPS); - write32(PMC_BASE_ADDRESS + PRSTS, prsts); + write32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1), gen_pmcon1 & ~RPS); + write32((u32 *)(PMC_BASE_ADDRESS + PRSTS), prsts); } diff --git a/src/soc/intel/baytrail/romstage/romstage.c b/src/soc/intel/baytrail/romstage/romstage.c index a989a99c89..91548e3edf 100644 --- a/src/soc/intel/baytrail/romstage/romstage.c +++ b/src/soc/intel/baytrail/romstage/romstage.c @@ -84,8 +84,8 @@ static void program_base_addresses(void) static void spi_init(void) { - const unsigned long scs = SPI_BASE_ADDRESS + SCS; - const unsigned long bcr = SPI_BASE_ADDRESS + BCR; + u32 *scs = (u32 *)(SPI_BASE_ADDRESS + SCS); + u32 *bcr = (u32 *)(SPI_BASE_ADDRESS + BCR); uint32_t reg; /* Disable generating SMI when setting WPD bit. */ @@ -169,9 +169,9 @@ static struct chipset_power_state *fill_power_state(void) ps->gpe0_sts = inl(ACPI_BASE_ADDRESS + GPE0_STS); ps->gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN); ps->tco_sts = inl(ACPI_BASE_ADDRESS + TCO_STS); - ps->prsts = read32(PMC_BASE_ADDRESS + PRSTS); - ps->gen_pmcon1 = read32(PMC_BASE_ADDRESS + GEN_PMCON1); - ps->gen_pmcon2 = read32(PMC_BASE_ADDRESS + GEN_PMCON2); + ps->prsts = read32((u32 *)(PMC_BASE_ADDRESS + PRSTS)); + ps->gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1)); + ps->gen_pmcon2 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON2)); printk(BIOS_DEBUG, "pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", ps->pm1_sts, ps->pm1_en, ps->pm1_cnt); diff --git a/src/soc/intel/baytrail/sata.c b/src/soc/intel/baytrail/sata.c index 28a2f8cae8..bed57c78a0 100644 --- a/src/soc/intel/baytrail/sata.c +++ b/src/soc/intel/baytrail/sata.c @@ -92,7 +92,7 @@ static void sata_init(struct device *dev) pci_write_config16(dev, 0x92, reg16); if (config->sata_ahci) { - u32 abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); + u8 *abar = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5); /* Enable CR memory space decoding */ reg16 = pci_read_config16(dev, 0x04); diff --git a/src/soc/intel/baytrail/smm.c b/src/soc/intel/baytrail/smm.c index daf759d206..9349dfa056 100644 --- a/src/soc/intel/baytrail/smm.c +++ b/src/soc/intel/baytrail/smm.c @@ -66,7 +66,7 @@ void southcluster_smm_clear_state(void) static void southcluster_smm_route_gpios(void) { - const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT; + u32 *gpio_rout = (u32 *)(PMC_BASE_ADDRESS + GPIO_ROUT); const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI; uint32_t alt_gpio_reg = 0; uint32_t route_reg = smm_save_params[SMM_SAVE_PARAM_GPIO_ROUTE]; diff --git a/src/soc/intel/baytrail/southcluster.c b/src/soc/intel/baytrail/southcluster.c index 5274b034f2..d0569b45c7 100644 --- a/src/soc/intel/baytrail/southcluster.c +++ b/src/soc/intel/baytrail/southcluster.c @@ -134,7 +134,7 @@ static void sc_rtc_init(void) if (ps != NULL) { gen_pmcon1 = ps->gen_pmcon1; } else { - gen_pmcon1 = read32(PMC_BASE_ADDRESS + GEN_PMCON1); + gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1)); } rtc_fail = !!(gen_pmcon1 & RPS); @@ -185,20 +185,20 @@ static void com1_configure_resume(device_t dev) static void sc_init(device_t dev) { int i; - const unsigned long pr_base = ILB_BASE_ADDRESS + 0x08; - const unsigned long ir_base = ILB_BASE_ADDRESS + 0x20; - const unsigned long gen_pmcon1 = PMC_BASE_ADDRESS + GEN_PMCON1; - const unsigned long actl = ILB_BASE_ADDRESS + ACTL; + u8 *pr_base = (u8 *)(ILB_BASE_ADDRESS + 0x08); + u16 *ir_base = (u16 *)ILB_BASE_ADDRESS + 0x20; + u32 *gen_pmcon1 = (u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1); + u32 *actl = (u32 *)(ILB_BASE_ADDRESS + ACTL); const struct baytrail_irq_route *ir = &global_baytrail_irq_route; struct soc_intel_baytrail_config *config = dev->chip_info; /* Set up the PIRQ PIC routing based on static config. */ for (i = 0; i < NUM_PIRQS; i++) { - write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]); + write8(pr_base + i, ir->pic[i]); } /* Set up the per device PIRQ routing base on static config. */ for (i = 0; i < NUM_IR_DEVS; i++) { - write16(ir_base + i*sizeof(ir->pcidev[i]), ir->pcidev[i]); + write16(ir_base + i, ir->pcidev[i]); } /* Route SCI to IRQ9 */ @@ -226,8 +226,8 @@ static void sc_init(device_t dev) /* Set bit in function disable register to hide this device. */ static void sc_disable_devfn(device_t dev) { - const unsigned long func_dis = PMC_BASE_ADDRESS + FUNC_DIS; - const unsigned long func_dis2 = PMC_BASE_ADDRESS + FUNC_DIS2; + u32 *func_dis = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS); + u32 *func_dis2 = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS2); uint32_t mask = 0; uint32_t mask2 = 0; @@ -347,7 +347,7 @@ static inline void set_d3hot_bits(device_t dev, int offset) * the audio paths work for LPE audio. */ static void hda_work_around(device_t dev) { - unsigned long gctl = TEMP_BASE_ADDRESS + 0x8; + u32 *gctl = (u32 *)(TEMP_BASE_ADDRESS + 0x8); /* Need to set magic register 0x43 to 0xd7 in config space. */ pci_write_config8(dev, 0x43, 0xd7); @@ -534,11 +534,11 @@ int __attribute__((weak)) mainboard_get_spi_config(struct spi_config *cfg) static void finalize_chipset(void *unused) { - const unsigned long bcr = SPI_BASE_ADDRESS + BCR; - const unsigned long gcs = RCBA_BASE_ADDRESS + GCS; - const unsigned long gen_pmcon2 = PMC_BASE_ADDRESS + GEN_PMCON2; - const unsigned long etr = PMC_BASE_ADDRESS + ETR; - const unsigned long spi = SPI_BASE_ADDRESS; + u32 *bcr = (u32 *)(SPI_BASE_ADDRESS + BCR); + u32 *gcs = (u32 *)(RCBA_BASE_ADDRESS + GCS); + u32 *gen_pmcon2 = (u32 *)(PMC_BASE_ADDRESS + GEN_PMCON2); + u32 *etr = (u32 *)(PMC_BASE_ADDRESS + ETR); + u8 *spi = (u8 *)SPI_BASE_ADDRESS; struct spi_config cfg; /* Set the lock enable on the BIOS control register. */ diff --git a/src/soc/intel/baytrail/spi.c b/src/soc/intel/baytrail/spi.c index 8605dfc197..a83fb8e5d4 100644 --- a/src/soc/intel/baytrail/spi.c +++ b/src/soc/intel/baytrail/spi.c @@ -196,33 +196,33 @@ static u32 readl_(const void *addr) static void writeb_(u8 b, const void *addr) { - write8((unsigned long)addr, b); + write8(addr, b); printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } static void writew_(u16 b, const void *addr) { - write16((unsigned long)addr, b); + write16(addr, b); printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } static void writel_(u32 b, const void *addr) { - write32((unsigned long)addr, b); + write32(addr, b); printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } #else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ -#define readb_(a) read8((uint32_t)a) -#define readw_(a) read16((uint32_t)a) -#define readl_(a) read32((uint32_t)a) -#define writeb_(val, addr) write8((uint32_t)addr, val) -#define writew_(val, addr) write16((uint32_t)addr, val) -#define writel_(val, addr) write32((uint32_t)addr, val) +#define readb_(a) read8(a) +#define readw_(a) read16(a) +#define readl_(a) read32(a) +#define writeb_(val, addr) write8(addr, val) +#define writew_(val, addr) write16(addr, val) +#define writel_(val, addr) write32(addr, val) #endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ diff --git a/src/soc/intel/broadwell/adsp.c b/src/soc/intel/broadwell/adsp.c index 2a6dc1744a..41372158a0 100644 --- a/src/soc/intel/broadwell/adsp.c +++ b/src/soc/intel/broadwell/adsp.c @@ -58,7 +58,8 @@ static void adsp_init(struct device *dev) * SNOOP_REQ[13]=1b SNOOP_SCALE[12:10]=100b (1ms) SNOOP_VAL[9:0]=3h */ tmp32 = pch_is_wpt() ? ADSP_SHIM_BASE_WPT : ADSP_SHIM_BASE_LPT; - write32(bar0->base + tmp32 + ADSP_SHIM_LTRC, ADSP_SHIM_LTRC_VALUE); + write32(res2mmio(bar0, tmp32 + ADSP_SHIM_LTRC, 0), + ADSP_SHIM_LTRC_VALUE); /* Program VDRTCTL2 D19:F0:A8[31:0] = 0x00000fff */ pci_write_config32(dev, ADSP_PCI_VDRTCTL2, ADSP_VDRTCTL2_VALUE); @@ -115,9 +116,9 @@ static void adsp_init(struct device *dev) ADSP_PCICFGCTL_ACPIIE); /* Put ADSP in D3hot */ - tmp32 = read32(bar1->base + PCH_PCS); + tmp32 = read32(res2mmio(bar1, PCH_PCS, 0)); tmp32 |= PCH_PCS_PS_D3HOT; - write32(bar1->base + PCH_PCS, tmp32); + write32(res2mmio(bar1, PCH_PCS, 0), tmp32); } else { printk(BIOS_INFO, "ADSP: Enable PCI Mode IRQ23\n"); diff --git a/src/soc/intel/broadwell/hda.c b/src/soc/intel/broadwell/hda.c index 80caa2c2eb..76868059ec 100644 --- a/src/soc/intel/broadwell/hda.c +++ b/src/soc/intel/broadwell/hda.c @@ -36,7 +36,7 @@ u32 cim_verb_data_size = 0; const u32 * pc_beep_verbs = NULL; u32 pc_beep_verbs_size = 0; -static void codecs_init(u32 base, u32 codec_mask) +static void codecs_init(u8 *base, u32 codec_mask) { int i; @@ -52,7 +52,7 @@ static void codecs_init(u32 base, u32 codec_mask) hda_codec_write(base, pc_beep_verbs_size, pc_beep_verbs); } -static void hda_pch_init(struct device *dev, u32 base) +static void hda_pch_init(struct device *dev, u8 *base) { u8 reg8; u16 reg16; @@ -108,7 +108,7 @@ static void hda_pch_init(struct device *dev, u32 base) static void hda_init(struct device *dev) { - u32 base; + u8 *base; struct resource *res; u32 codec_mask; u32 reg32; @@ -118,8 +118,8 @@ static void hda_init(struct device *dev) if (!res) return; - base = (u32)res->base; - printk(BIOS_DEBUG, "HDA: base = %08x\n", (u32)base); + base = res2mmio(res, 0, 0); + printk(BIOS_DEBUG, "HDA: base = %p\n", base); /* Set Bus Master */ reg32 = pci_read_config32(dev, PCI_COMMAND); diff --git a/src/soc/intel/broadwell/igd.c b/src/soc/intel/broadwell/igd.c index 0f27fec625..31293e5ed3 100644 --- a/src/soc/intel/broadwell/igd.c +++ b/src/soc/intel/broadwell/igd.c @@ -246,14 +246,14 @@ static struct resource *gtt_res = NULL; static unsigned long gtt_read(unsigned long reg) { u32 val; - val = read32(gtt_res->base + reg); + val = read32(res2mmio(gtt_res, reg, 0)); return val; } static void gtt_write(unsigned long reg, unsigned long data) { - write32(gtt_res->base + reg, data); + write32(res2mmio(gtt_res, reg, 0), data); } static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask) diff --git a/src/soc/intel/broadwell/lpc.c b/src/soc/intel/broadwell/lpc.c index 394a9d7bdd..53cc4b8a24 100644 --- a/src/soc/intel/broadwell/lpc.c +++ b/src/soc/intel/broadwell/lpc.c @@ -53,22 +53,22 @@ static void pch_enable_ioapic(struct device *dev) { u32 reg32; - set_ioapic_id(IO_APIC_ADDR, 0x02); + set_ioapic_id(VIO_APIC_VADDR, 0x02); /* affirm full set of redirection table entries ("write once") */ - reg32 = io_apic_read(IO_APIC_ADDR, 0x01); + reg32 = io_apic_read(VIO_APIC_VADDR, 0x01); /* PCH-LP has 39 redirection entries */ reg32 &= ~0x00ff0000; reg32 |= 0x00270000; - io_apic_write(IO_APIC_ADDR, 0x01, reg32); + io_apic_write(VIO_APIC_VADDR, 0x01, reg32); /* * Select Boot Configuration register (0x03) and * use Processor System Bus (0x01) to deliver interrupts. */ - io_apic_write(IO_APIC_ADDR, 0x03, 0x01); + io_apic_write(VIO_APIC_VADDR, 0x03, 0x01); } /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control diff --git a/src/soc/intel/broadwell/me.c b/src/soc/intel/broadwell/me.c index de043f4dea..fd28cfe5e6 100644 --- a/src/soc/intel/broadwell/me.c +++ b/src/soc/intel/broadwell/me.c @@ -60,7 +60,7 @@ static const char *me_bios_path_values[] = { static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev); /* MMIO base address for MEI interface */ -static u32 mei_base_address; +static u8 *mei_base_address; void intel_me_mbp_clear(device_t dev); #if CONFIG_DEBUG_INTEL_ME @@ -572,7 +572,7 @@ void intel_me_finalize(void) u32 reg32; /* S3 path will have hidden this device already */ - if (!mei_base_address || mei_base_address == 0xfffffff0) + if (!mei_base_address || mei_base_address == (u8 *)0xfffffff0) return; #if CONFIG_ME_MBP_CLEAR_LATE @@ -710,7 +710,7 @@ static int intel_mei_setup(device_t dev) printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); return -1; } - mei_base_address = res->base; + mei_base_address = res2mmio(res, 0, 0); /* Ensure Memory and Bus Master bits are set */ reg32 = pci_read_config32(dev, PCI_COMMAND); diff --git a/src/soc/intel/broadwell/minihd.c b/src/soc/intel/broadwell/minihd.c index 43aeec20ae..6fd8e63652 100644 --- a/src/soc/intel/broadwell/minihd.c +++ b/src/soc/intel/broadwell/minihd.c @@ -68,7 +68,7 @@ static const u32 minihd_verb_table[] = { static void minihd_init(struct device *dev) { struct resource *res; - u32 base, reg32; + u8 *base, reg32; int codec_mask, i; /* Find base address */ @@ -76,8 +76,8 @@ static void minihd_init(struct device *dev) if (!res) return; - base = (u32)res->base; - printk(BIOS_DEBUG, "Mini-HD: base = %08x\n", (u32)base); + base = res2mmio(res, 0, 0); + printk(BIOS_DEBUG, "Mini-HD: base = %p\n", base); /* Set Bus Master */ reg32 = pci_read_config32(dev, PCI_COMMAND); diff --git a/src/soc/intel/broadwell/sata.c b/src/soc/intel/broadwell/sata.c index e8d1fbe684..13b4fe09bf 100644 --- a/src/soc/intel/broadwell/sata.c +++ b/src/soc/intel/broadwell/sata.c @@ -45,7 +45,8 @@ static inline void sir_write(struct device *dev, int idx, u32 value) static void sata_init(struct device *dev) { config_t *config = dev->chip_info; - u32 reg32, abar; + u32 reg32; + u8 *abar; u16 reg16; printk(BIOS_DEBUG, "SATA: Initializing controller in AHCI mode.\n"); @@ -107,8 +108,8 @@ static void sata_init(struct device *dev) pci_write_config32(dev, 0x94, reg32); /* Initialize AHCI memory-mapped space */ - abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); - printk(BIOS_DEBUG, "ABAR: %08X\n", abar); + abar = (u8 *)(pci_read_config32(dev, PCI_BASE_ADDRESS_5)); + printk(BIOS_DEBUG, "ABAR: %p\n", abar); /* CAP (HBA Capabilities) : enable power management */ reg32 = read32(abar + 0x00); diff --git a/src/soc/intel/broadwell/serialio.c b/src/soc/intel/broadwell/serialio.c index e2b17afa66..82f37cdb94 100644 --- a/src/soc/intel/broadwell/serialio.c +++ b/src/soc/intel/broadwell/serialio.c @@ -37,9 +37,9 @@ /* Set D3Hot Power State in ACPI mode */ static void serialio_enable_d3hot(struct resource *res) { - u32 reg32 = read32(res->base + PCH_PCS); + u32 reg32 = read32(res2mmio(res, PCH_PCS, 0)); reg32 |= PCH_PCS_PS_D3HOT; - write32(res->base + PCH_PCS, reg32); + write32(res2mmio(res, PCH_PCS, 0), reg32); } static int serialio_uart_is_debug(struct device *dev) @@ -58,9 +58,9 @@ static int serialio_uart_is_debug(struct device *dev) /* Enable clock in PCI mode */ static void serialio_enable_clock(struct resource *bar0) { - u32 reg32 = read32(bar0->base + SIO_REG_PPR_CLOCK); + u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0)); reg32 |= SIO_REG_PPR_CLOCK_EN; - write32(bar0->base + SIO_REG_PPR_CLOCK, reg32); + write32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0), reg32); } /* Put Serial IO D21:F0-F6 device into desired mode. */ @@ -111,22 +111,22 @@ static void serialio_d21_ltr(struct resource *bar0) u32 reg; /* 1. Program BAR0 + 808h[2] = 0b */ - reg = read32(bar0->base + SIO_REG_PPR_GEN); + reg = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0)); reg &= ~SIO_REG_PPR_GEN_LTR_MODE_MASK; - write32(bar0->base + SIO_REG_PPR_GEN, reg); + write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg); /* 2. Program BAR0 + 804h[1:0] = 00b */ - reg = read32(bar0->base + SIO_REG_PPR_RST); + reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0)); reg &= ~SIO_REG_PPR_RST_ASSERT; - write32(bar0->base + SIO_REG_PPR_RST, reg); + write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg); /* 3. Program BAR0 + 804h[1:0] = 11b */ - reg = read32(bar0->base + SIO_REG_PPR_RST); + reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0)); reg |= SIO_REG_PPR_RST_ASSERT; - write32(bar0->base + SIO_REG_PPR_RST, reg); + write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg); /* 4. Program BAR0 + 814h[31:0] = 00000000h */ - write32(bar0->base + SIO_REG_AUTO_LTR, 0); + write32(res2mmio(bar0, SIO_REG_AUTO_LTR, 0), 0); } /* Enable LTR Auto Mode for D23:F0. */ @@ -135,26 +135,26 @@ static void serialio_d23_ltr(struct resource *bar0) u32 reg; /* Program BAR0 + 1008h[2] = 1b */ - reg = read32(bar0->base + SIO_REG_SDIO_PPR_GEN); + reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0)); reg |= SIO_REG_PPR_GEN_LTR_MODE_MASK; - write32(bar0->base + SIO_REG_SDIO_PPR_GEN, reg); + write32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0), reg); /* Program BAR0 + 1010h = 0x00000000 */ - write32(bar0->base + SIO_REG_SDIO_PPR_SW_LTR, 0); + write32(res2mmio(bar0, SIO_REG_SDIO_PPR_SW_LTR, 0), 0); /* Program BAR0 + 3Ch[30] = 1b */ - reg = read32(bar0->base + SIO_REG_SDIO_PPR_CMD12); + reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0)); reg |= SIO_REG_SDIO_PPR_CMD12_B30; - write32(bar0->base + SIO_REG_SDIO_PPR_CMD12, reg); + write32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0), reg); } /* Select I2C voltage of 1.8V or 3.3V. */ static void serialio_i2c_voltage_sel(struct resource *bar0, u8 voltage) { - u32 reg32 = read32(bar0->base + SIO_REG_PPR_GEN); + u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0)); reg32 &= ~SIO_REG_PPR_GEN_VOLTAGE_MASK; reg32 |= SIO_REG_PPR_GEN_VOLTAGE(voltage); - write32(bar0->base + SIO_REG_PPR_GEN, reg32); + write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg32); } /* Init sequence to be run once, done as part of D21:F0 (SDMA) init. */ diff --git a/src/soc/intel/broadwell/spi.c b/src/soc/intel/broadwell/spi.c index eeffda0378..4710271070 100644 --- a/src/soc/intel/broadwell/spi.c +++ b/src/soc/intel/broadwell/spi.c @@ -168,7 +168,7 @@ enum { static u8 readb_(const void *addr) { - u8 v = read8((unsigned long)addr); + u8 v = read8(addr); printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", v, ((unsigned) addr & 0xffff) - 0xf020); return v; @@ -176,7 +176,7 @@ static u8 readb_(const void *addr) static u16 readw_(const void *addr) { - u16 v = read16((unsigned long)addr); + u16 v = read16(addr); printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", v, ((unsigned) addr & 0xffff) - 0xf020); return v; @@ -184,7 +184,7 @@ static u16 readw_(const void *addr) static u32 readl_(const void *addr) { - u32 v = read32((unsigned long)addr); + u32 v = read32(addr); printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", v, ((unsigned) addr & 0xffff) - 0xf020); return v; @@ -192,33 +192,33 @@ static u32 readl_(const void *addr) static void writeb_(u8 b, const void *addr) { - write8((unsigned long)addr, b); + write8(addr, b); printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } static void writew_(u16 b, const void *addr) { - write16((unsigned long)addr, b); + write16(addr, b); printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } static void writel_(u32 b, const void *addr) { - write32((unsigned long)addr, b); + write32(addr, b); printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } #else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ -#define readb_(a) read8((uint32_t)a) -#define readw_(a) read16((uint32_t)a) -#define readl_(a) read32((uint32_t)a) -#define writeb_(val, addr) write8((uint32_t)addr, val) -#define writew_(val, addr) write16((uint32_t)addr, val) -#define writel_(val, addr) write32((uint32_t)addr, val) +#define readb_(a) read8(a) +#define readw_(a) read16(a) +#define readl_(a) read32(a) +#define writeb_(val, addr) write8(addr, val) +#define writew_(val, addr) write16(addr, val) +#define writel_(val, addr) write32(addr, val) #endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ diff --git a/src/soc/intel/broadwell/xhci.c b/src/soc/intel/broadwell/xhci.c index 89e1139f14..60223c1310 100644 --- a/src/soc/intel/broadwell/xhci.c +++ b/src/soc/intel/broadwell/xhci.c @@ -27,7 +27,7 @@ #include #ifdef __SMM__ -static u32 usb_xhci_mem_base(device_t dev) +static u8 *usb_xhci_mem_base(device_t dev) { u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); @@ -35,7 +35,7 @@ static u32 usb_xhci_mem_base(device_t dev) if (mem_base == 0 || mem_base == 0xffffffff) return 0; - return mem_base & ~0xf; + return (u8 *)(mem_base & ~0xf); } static int usb_xhci_port_count_usb3(device_t dev) @@ -44,9 +44,9 @@ static int usb_xhci_port_count_usb3(device_t dev) return 4; } -static void usb_xhci_reset_status_usb3(u32 mem_base, int port) +static void usb_xhci_reset_status_usb3(u8 *mem_base, int port) { - u32 portsc = mem_base + XHCI_USB3_PORTSC(port); + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); u32 status = read32(portsc); /* Do not set Port Enabled/Disabled field */ status &= ~XHCI_USB3_PORTSC_PED; @@ -55,9 +55,9 @@ static void usb_xhci_reset_status_usb3(u32 mem_base, int port) write32(portsc, status); } -static void usb_xhci_reset_port_usb3(u32 mem_base, int port) +static void usb_xhci_reset_port_usb3(u8 *mem_base, int port) { - u32 portsc = mem_base + XHCI_USB3_PORTSC(port); + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); write32(portsc, read32(portsc) | XHCI_USB3_PORTSC_WPR); } @@ -76,7 +76,7 @@ static void usb_xhci_reset_usb3(device_t dev, int all) u32 status, port_disabled; int timeout, port; int port_count = usb_xhci_port_count_usb3(dev); - u32 mem_base = usb_xhci_mem_base(dev); + u8 *mem_base = usb_xhci_mem_base(dev); if (!mem_base || !port_count) return; @@ -105,7 +105,7 @@ static void usb_xhci_reset_usb3(device_t dev, int all) /* Reset all requested ports */ for (port = 0; port < port_count; port++) { - u32 portsc = mem_base + XHCI_USB3_PORTSC(port); + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); /* Skip disabled ports */ if (port_disabled & (1 << port)) continue; @@ -146,7 +146,7 @@ void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ) { u16 reg16; u32 reg32; - u32 mem_base = usb_xhci_mem_base(dev); + u8 *mem_base = usb_xhci_mem_base(dev); if (!mem_base || slp_typ < 3) return; diff --git a/src/soc/intel/common/hda_verb.c b/src/soc/intel/common/hda_verb.c index 946972ef7e..bd61ceeca4 100644 --- a/src/soc/intel/common/hda_verb.c +++ b/src/soc/intel/common/hda_verb.c @@ -27,7 +27,7 @@ /** * Set bits in a register and wait for status */ -static int set_bits(u32 port, u32 mask, u32 val) +static int set_bits(void *port, u32 mask, u32 val) { u32 reg32; int count; @@ -59,7 +59,7 @@ static int set_bits(u32 port, u32 mask, u32 val) /** * Probe for supported codecs */ -int hda_codec_detect(u32 base) +int hda_codec_detect(u8 *base) { u8 reg8; @@ -90,7 +90,7 @@ no_codec: * Wait 50usec for the codec to indicate it is ready * no response would imply that the codec is non-operative */ -static int hda_wait_for_ready(u32 base) +static int hda_wait_for_ready(u8 *base) { /* Use a 50 usec timeout - the Linux kernel uses the * same duration */ @@ -112,7 +112,7 @@ static int hda_wait_for_ready(u32 base) * the previous command. No response would imply that the code * is non-operative */ -static int hda_wait_for_valid(u32 base) +static int hda_wait_for_valid(u8 *base) { u32 reg32; @@ -184,7 +184,7 @@ static u32 hda_find_verb(u32 verb_table_bytes, /** * Write a supplied verb table */ -int hda_codec_write(u32 base, u32 size, const u32 *data) +int hda_codec_write(u8 *base, u32 size, const u32 *data) { int i; @@ -204,7 +204,7 @@ int hda_codec_write(u32 base, u32 size, const u32 *data) /** * Initialize codec, then find the verb table and write it */ -int hda_codec_init(u32 base, int addr, int verb_size, const u32 *verb_data) +int hda_codec_init(u8 *base, int addr, int verb_size, const u32 *verb_data) { const u32 *verb; u32 reg32, size; diff --git a/src/soc/intel/common/hda_verb.h b/src/soc/intel/common/hda_verb.h index a9c93c6e4f..e062f28c81 100644 --- a/src/soc/intel/common/hda_verb.h +++ b/src/soc/intel/common/hda_verb.h @@ -32,8 +32,8 @@ #define HDA_ICII_BUSY (1 << 0) #define HDA_ICII_VALID (1 << 1) -int hda_codec_detect(u32 base); -int hda_codec_write(u32 base, u32 size, const u32 *data); -int hda_codec_init(u32 base, int addr, int verb_size, const u32 *verb_data); +int hda_codec_detect(u8 *base); +int hda_codec_write(u8 *base, u32 size, const u32 *data); +int hda_codec_init(u8 *base, int addr, int verb_size, const u32 *verb_data); #endif /* _COMMON_HDA_VERB_H_ */ diff --git a/src/soc/intel/fsp_baytrail/acpi.c b/src/soc/intel/fsp_baytrail/acpi.c index fb0dc877f4..11c44934f4 100644 --- a/src/soc/intel/fsp_baytrail/acpi.c +++ b/src/soc/intel/fsp_baytrail/acpi.c @@ -105,7 +105,7 @@ void acpi_init_gnvs(global_nvs_t *gnvs) static int acpi_sci_irq(void) { - const unsigned long actl = ILB_BASE_ADDRESS + ACTL; + u32 *actl = (u32 *)(ILB_BASE_ADDRESS + ACTL); int scis; static int sci_irq; diff --git a/src/soc/intel/fsp_baytrail/baytrail/baytrail.h b/src/soc/intel/fsp_baytrail/baytrail/baytrail.h index d3a23770dd..1982c278d1 100644 --- a/src/soc/intel/fsp_baytrail/baytrail/baytrail.h +++ b/src/soc/intel/fsp_baytrail/baytrail/baytrail.h @@ -34,8 +34,11 @@ /* Southbridge internal device MEM BARs (Set to match FSP settings) */ #define DEFAULT_IBASE 0xfed08000 #define DEFAULT_PBASE 0xfed03000 +#ifndef __ACPI__ +#define DEFAULT_RCBA ((u8 *)0xfed1c000) +#else #define DEFAULT_RCBA 0xfed1c000 - +#endif /* Everything below this line is ignored in the DSDT */ #ifndef __ACPI__ diff --git a/src/soc/intel/fsp_baytrail/baytrail/gpio.h b/src/soc/intel/fsp_baytrail/baytrail/gpio.h index a45254a8af..e06c8d6bee 100644 --- a/src/soc/intel/fsp_baytrail/baytrail/gpio.h +++ b/src/soc/intel/fsp_baytrail/baytrail/gpio.h @@ -353,20 +353,20 @@ void configure_score_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val); #define PCU_SMB_CLK_PAD 88 #define PCU_SMB_DATA_PAD 90 -static inline unsigned int score_pconf0(int pad_num) +static inline uint32_t *score_pconf0(int pad_num) { - return GPSCORE_PAD_BASE + pad_num * 16; + return (uint32_t *)(GPSCORE_PAD_BASE + pad_num * 16); } -static inline unsigned int ssus_pconf0(int pad_num) +static inline uint32_t *ssus_pconf0(int pad_num) { - return GPSSUS_PAD_BASE + pad_num * 16; + return (uint32_t *)(GPSSUS_PAD_BASE + pad_num * 16); } static inline void score_select_func(int pad, int func) { uint32_t reg; - uint32_t pconf0_addr = score_pconf0(pad); + uint32_t *pconf0_addr = score_pconf0(pad); reg = read32(pconf0_addr); reg &= ~0x7; @@ -377,7 +377,7 @@ static inline void score_select_func(int pad, int func) static inline void ssus_select_func(int pad, int func) { uint32_t reg; - uint32_t pconf0_addr = ssus_pconf0(pad); + uint32_t *pconf0_addr = ssus_pconf0(pad); reg = read32(pconf0_addr); reg &= ~0x7; @@ -390,14 +390,14 @@ static inline void ssus_select_func(int pad, int func) /* These functions require that the input pad be configured as an input GPIO */ static inline int score_get_gpio(int pad) { - uint32_t val_addr = score_pconf0(pad) + PAD_VAL_REG; + uint32_t *val_addr = score_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t)); return read32(val_addr) & PAD_VAL_HIGH; } static inline int ssus_get_gpio(int pad) { - uint32_t val_addr = ssus_pconf0(pad) + PAD_VAL_REG; + uint32_t *val_addr = ssus_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t)); return read32(val_addr) & PAD_VAL_HIGH; } diff --git a/src/soc/intel/fsp_baytrail/bootblock/bootblock.c b/src/soc/intel/fsp_baytrail/bootblock/bootblock.c index e8f5572ef7..843e7410d7 100644 --- a/src/soc/intel/fsp_baytrail/bootblock/bootblock.c +++ b/src/soc/intel/fsp_baytrail/bootblock/bootblock.c @@ -63,7 +63,7 @@ static void set_var_mtrr(int reg, uint32_t base, uint32_t size, int type) */ static void enable_spi_prefetch(void) { - uint32_t bcr = SPI_BASE_ADDRESS + BCR; + u32 *bcr = (u32 *)(SPI_BASE_ADDRESS + BCR); /* Enable caching and prefetching in the SPI controller. */ write32(bcr, (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH); } diff --git a/src/soc/intel/fsp_baytrail/gpio.c b/src/soc/intel/fsp_baytrail/gpio.c index b202f0061f..f4159c9588 100644 --- a/src/soc/intel/fsp_baytrail/gpio.c +++ b/src/soc/intel/fsp_baytrail/gpio.c @@ -103,7 +103,7 @@ static void setup_gpios(const struct soc_gpio_map *gpios, { const struct soc_gpio_map *config; int gpio = 0; - u32 reg, pad_conf0; + u32 reg, pad_conf0, *regmmio; u8 set, bit; u32 use_sel[4] = {0}; @@ -138,7 +138,8 @@ static void setup_gpios(const struct soc_gpio_map *gpios, } /* Pad configuration registers */ - reg = bank->pad_base + 16 * bank->gpio_to_pad[gpio]; + regmmio = (u32 *)(bank->pad_base + 16 * + bank->gpio_to_pad[gpio]); /* Add correct func to GPIO pad config */ pad_conf0 = config->pad_conf0; @@ -152,13 +153,14 @@ static void setup_gpios(const struct soc_gpio_map *gpios, } #ifdef GPIO_DEBUG - printk(BIOS_DEBUG, "Write Pad: Base(%x) - %x %x %x\n", - reg, pad_conf0, config->pad_conf1, config->pad_val); + printk(BIOS_DEBUG, "Write Pad: Base(%p) - %x %x %x\n", + regmmio, pad_conf0, config->pad_conf1, config->pad_val); #endif - write32(reg + PAD_CONF0_REG, pad_conf0); - write32(reg + PAD_CONF1_REG, config->pad_conf1); - write32(reg + PAD_VAL_REG, config->pad_val); + write32(regmmio + (PAD_CONF0_REG/sizeof(u32)), pad_conf0); + write32(regmmio + (PAD_CONF1_REG/sizeof(u32)), + config->pad_conf1); + write32(regmmio + (PAD_VAL_REG/sizeof(u32)), config->pad_val); } if (bank->legacy_base != GP_LEGACY_BASE_NONE) @@ -215,7 +217,7 @@ static void setup_gpio_route(const struct soc_gpio_map *sus, static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], const struct gpio_bank *bank) { - u32 reg = bank->pad_base + PAD_BASE_DIRQ_OFFSET; + u32 *reg = (u32 *)(bank->pad_base + PAD_BASE_DIRQ_OFFSET); u32 val; int i; @@ -223,10 +225,10 @@ static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], for (i=0; i<4; ++i) { val = dirq[i * 4 + 3] << 24 | dirq[i * 4 + 2] << 16 | dirq[i * 4 + 1] << 8 | dirq[i * 4]; - write32(reg + i * 4, val); + write32(reg + i, val); #ifdef GPIO_DEBUG printk(BIOS_DEBUG, "Write DIRQ reg(%x) - %x\n", - reg + i * 4, val); + reg + i, val); #endif } } @@ -299,7 +301,7 @@ static void configure_ssus_score_gpio(uint8_t ssus_gpio, uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val) { uint32_t reg; - uint32_t pad_addr; + uint32_t *pad_addr; if (ssus_gpio) pad_addr = ssus_pconf0(gpssus_gpio_to_pad[gpio_num]); else @@ -321,7 +323,7 @@ static void configure_ssus_score_gpio(uint8_t ssus_gpio, uint8_t gpio_num, */ reg = PAD_CONFIG0_DEFAULT; reg |= pconf0 & 0x787; - write32(pad_addr + PAD_CONF0_REG, reg); + write32(pad_addr + (PAD_CONF0_REG/sizeof(u32)), reg); /* * Pad Value Register @@ -329,10 +331,10 @@ static void configure_ssus_score_gpio(uint8_t ssus_gpio, uint8_t gpio_num, * 1: output enable (0 is enabled) * 2: input enable (0 is enabled) */ - reg = read32(pad_addr + PAD_VAL_REG); + reg = read32(pad_addr + (PAD_VAL_REG/sizeof(u32))); reg &= ~0x7; reg |= pad_val & 0x7; - write32(pad_addr + PAD_VAL_REG, reg); + write32(pad_addr + (PAD_VAL_REG/sizeof(u32)), reg); } /** \brief Sets up the function, pulls, and Input/Output of a Baytrail S5 GPIO diff --git a/src/soc/intel/fsp_baytrail/iosf.c b/src/soc/intel/fsp_baytrail/iosf.c index f892b20a6b..eee7c64692 100644 --- a/src/soc/intel/fsp_baytrail/iosf.c +++ b/src/soc/intel/fsp_baytrail/iosf.c @@ -29,11 +29,11 @@ static inline void write_iosf_reg(int reg, uint32_t value) { - write32(IOSF_PCI_BASE + reg, value); + write32((u32 *)(IOSF_PCI_BASE + reg), value); } static inline uint32_t read_iosf_reg(int reg) { - return read32(IOSF_PCI_BASE + reg); + return read32((u32 *)(IOSF_PCI_BASE + reg)); } #else static inline void write_iosf_reg(int reg, uint32_t value) diff --git a/src/soc/intel/fsp_baytrail/pmutil.c b/src/soc/intel/fsp_baytrail/pmutil.c index aee37261be..8295b692b7 100644 --- a/src/soc/intel/fsp_baytrail/pmutil.c +++ b/src/soc/intel/fsp_baytrail/pmutil.c @@ -355,10 +355,10 @@ void clear_pmc_status(void) uint32_t prsts; uint32_t gen_pmcon1; - prsts = read32(PMC_BASE_ADDRESS + PRSTS); - gen_pmcon1 = read32(PMC_BASE_ADDRESS + GEN_PMCON1); + prsts = read32((u32 *)(PMC_BASE_ADDRESS + PRSTS)); + gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1)); /* Clear the status bits. The RPS field is cleared on a 0 write. */ - write32(PMC_BASE_ADDRESS + GEN_PMCON1, gen_pmcon1 & ~RPS); - write32(PMC_BASE_ADDRESS + PRSTS, prsts); + write32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1), gen_pmcon1 & ~RPS); + write32((u32 *)(PMC_BASE_ADDRESS + PRSTS), prsts); } diff --git a/src/soc/intel/fsp_baytrail/romstage/romstage.c b/src/soc/intel/fsp_baytrail/romstage/romstage.c index e487a25e86..81a02795ab 100644 --- a/src/soc/intel/fsp_baytrail/romstage/romstage.c +++ b/src/soc/intel/fsp_baytrail/romstage/romstage.c @@ -56,7 +56,7 @@ uint32_t chipset_prev_sleep_state(uint32_t clear) /* Read Power State */ pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); - gen_pmcon1 = read32(PMC_BASE_ADDRESS + GEN_PMCON1); + gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1)); printk(BIOS_DEBUG, "PM1_STS = 0x%x PM1_CNT = 0x%x GEN_PMCON1 = 0x%x\n", pm1_sts, pm1_cnt, gen_pmcon1); @@ -118,8 +118,8 @@ static void program_base_addresses(void) static void spi_init(void) { - const uint32_t scs = SPI_BASE_ADDRESS + SCS; - const uint32_t bcr = SPI_BASE_ADDRESS + BCR; + uint32_t *scs = (uint32_t *)(SPI_BASE_ADDRESS + SCS); + uint32_t *bcr = (uint32_t *)(SPI_BASE_ADDRESS + BCR); uint32_t reg; /* Disable generating SMI when setting WPD bit. */ @@ -135,8 +135,8 @@ static void spi_init(void) static void baytrail_rtc_init(void) { - uint32_t pbase = pci_read_config32(LPC_BDF, PBASE) & 0xfffffff0; - uint32_t gen_pmcon1 = read32(pbase + GEN_PMCON1); + uint32_t *pbase = (uint32_t *)(pci_read_config32(LPC_BDF, PBASE) & 0xfffffff0); + uint32_t gen_pmcon1 = read32(pbase + (GEN_PMCON1/sizeof(u32))); int rtc_failed = !!(gen_pmcon1 & RPS); if (rtc_failed) { @@ -144,7 +144,7 @@ static void baytrail_rtc_init(void) "RTC Failure detected. Resetting Date to %s\n", coreboot_dmi_date); - write32(DEFAULT_PBASE + GEN_PMCON1, gen_pmcon1 & ~RPS); + write32((uint32_t *)(DEFAULT_PBASE + GEN_PMCON1), gen_pmcon1 & ~RPS); } cmos_init(rtc_failed); @@ -153,8 +153,8 @@ static void baytrail_rtc_init(void) /* Entry from cache-as-ram.inc. */ void main(FSP_INFO_HEADER *fsp_info_header) { - const unsigned long func_dis = PMC_BASE_ADDRESS + FUNC_DIS; - const unsigned long func_dis2 = PMC_BASE_ADDRESS + FUNC_DIS2; + uint32_t *func_dis = (uint32_t *)(PMC_BASE_ADDRESS + FUNC_DIS); + uint32_t *func_dis2 = (uint32_t *)(PMC_BASE_ADDRESS + FUNC_DIS2); uint32_t fd_mask = 0; uint32_t fd2_mask = 0; diff --git a/src/soc/intel/fsp_baytrail/smm.c b/src/soc/intel/fsp_baytrail/smm.c index d4b3d58350..2a8892d04a 100644 --- a/src/soc/intel/fsp_baytrail/smm.c +++ b/src/soc/intel/fsp_baytrail/smm.c @@ -67,7 +67,7 @@ void southcluster_smm_clear_state(void) static void southcluster_smm_route_gpios(void) { - const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT; + u32 *gpio_rout = (u32 *)(PMC_BASE_ADDRESS + GPIO_ROUT); const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI; uint32_t alt_gpio_reg = 0; uint32_t route_reg = gpio_route; diff --git a/src/soc/intel/fsp_baytrail/southcluster.c b/src/soc/intel/fsp_baytrail/southcluster.c index d87935b517..878535f534 100644 --- a/src/soc/intel/fsp_baytrail/southcluster.c +++ b/src/soc/intel/fsp_baytrail/southcluster.c @@ -82,17 +82,17 @@ static void sc_enable_ioapic(struct device *dev) { int i; u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); - u32 ilb_base = pci_read_config32(dev, IBASE) & ~0x0f; + volatile u32 *ioapic_index = (u32 *)(IO_APIC_ADDR); + volatile u32 *ioapic_data = (u32 *)(IO_APIC_ADDR + 0x10); + u8 *ilb_base = (u8 *)(pci_read_config32(dev, IBASE) & ~0x0f); /* * Enable ACPI I/O and power management. * Set SCI IRQ to IRQ9 */ write32(ilb_base + ILB_OIC, 0x100); /* AEN */ - reg32 = read32(ilb_base + ILB_OIC); /* Read back per BWG */ - write32(ilb_base + ILB_ACTL, 0); /* ACTL bit 2:0 SCIS IRQ9 */ + reg32 = read32(ilb_base + (ILB_OIC/sizeof(u32))); /* Read back per BWG */ + write32(ilb_base + (ILB_ACTL/sizeof(u32)), 0); /* ACTL bit 2:0 SCIS IRQ9 */ *ioapic_index = 0; *ioapic_data = (1 << 25); @@ -131,7 +131,7 @@ static void sc_enable_serial_irqs(struct device *dev) * until we understand how it needs to be configured. */ u8 reg8; - u32 ibase = pci_read_config32(dev, IBASE) & ~0xF; + u8 *ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF); /* * Disable the IOCHK# NMI. Let the NMI handler enable it if it needs. @@ -259,9 +259,9 @@ static void sc_pirq_init(device_t dev) { int i, j; int pirq; - const unsigned long pr_base = ILB_BASE_ADDRESS + 0x08; - const unsigned long ir_base = ILB_BASE_ADDRESS + 0x20; - const unsigned long actl = ILB_BASE_ADDRESS + ACTL; + u8 *pr_base = (u8 *)(ILB_BASE_ADDRESS + 0x08); + u16 *ir_base = (u16 *)(ILB_BASE_ADDRESS + 0x20); + u32 *actl = (u32 *)(ILB_BASE_ADDRESS + ACTL); const struct baytrail_irq_route *ir = &global_baytrail_irq_route; /* Set up the PIRQ PIC routing based on static config. */ @@ -269,7 +269,7 @@ static void sc_pirq_init(device_t dev) "PIRQ\tA \tB \tC \tD \tE \tF \tG \tH\n" "IRQ "); for (i = 0; i < NUM_PIRQS; i++) { - write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]); + write8(pr_base + i, ir->pic[i]); printk(BIOS_SPEW, "\t%d", ir->pic[i]); } printk(BIOS_SPEW, "\n\n"); @@ -278,7 +278,7 @@ static void sc_pirq_init(device_t dev) printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n" "Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n"); for (i = 0; i < NUM_OF_PCI_DEVS; i++) { - write16(ir_base + i*sizeof(ir->pcidev[i]), ir->pcidev[i]); + write16(ir_base + i, ir->pcidev[i]); /* If the entry is more than just 0, print it out */ if(ir->pcidev[i]) { @@ -372,11 +372,11 @@ static void enable_hpet(void) static void sc_init(struct device *dev) { - u32 ibase; + u8 *ibase; printk(BIOS_DEBUG, "soc: southcluster_init\n"); - ibase = pci_read_config32(dev, IBASE) & ~0xF; + ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF); write8(ibase + ILB_MC, 0); @@ -411,8 +411,8 @@ static void sc_init(struct device *dev) /* Set bit in function disable register to hide this device. */ static void sc_disable_devfn(device_t dev) { - const unsigned long func_dis = PMC_BASE_ADDRESS + FUNC_DIS; - const unsigned long func_dis2 = PMC_BASE_ADDRESS + FUNC_DIS2; + u32 *func_dis = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS); + u32 *func_dis2 = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS2); uint32_t fd_mask = 0; uint32_t fd2_mask = 0; @@ -471,7 +471,7 @@ static inline void set_d3hot_bits(device_t dev, int offset) * the audio paths work for LPE audio. */ static void hda_work_around(device_t dev) { - unsigned long gctl = TEMP_BASE_ADDRESS + 0x8; + u32 *gctl = (u32 *)(TEMP_BASE_ADDRESS + 0x8); /* Need to set magic register 0x43 to 0xd7 in config space. */ pci_write_config8(dev, 0x43, 0xd7); diff --git a/src/soc/intel/fsp_baytrail/spi.c b/src/soc/intel/fsp_baytrail/spi.c index 0c3c63d8da..abcc62cde1 100644 --- a/src/soc/intel/fsp_baytrail/spi.c +++ b/src/soc/intel/fsp_baytrail/spi.c @@ -193,33 +193,33 @@ static u32 readl_(const void *addr) static void writeb_(u8 b, const void *addr) { - write8((unsigned long)addr, b); + write8(addr, b); printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } static void writew_(u16 b, const void *addr) { - write16((unsigned long)addr, b); + write16(addr, b); printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } static void writel_(u32 b, const void *addr) { - write32((unsigned long)addr, b); + write32(addr, b); printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", b, ((unsigned) addr & 0xffff) - 0xf020); } #else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ -#define readb_(a) read8((uint32_t)a) -#define readw_(a) read16((uint32_t)a) -#define readl_(a) read32((uint32_t)a) -#define writeb_(val, addr) write8((uint32_t)addr, val) -#define writew_(val, addr) write16((uint32_t)addr, val) -#define writel_(val, addr) write32((uint32_t)addr, val) +#define readb_(a) read8(a) +#define readw_(a) read16(a) +#define readl_(a) read32(a) +#define writeb_(val, addr) write8(addr, val) +#define writew_(val, addr) write16(addr, val) +#define writel_(val, addr) write32(addr, val) #endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ -- cgit v1.2.3