From b1ffca30576770999199fc8b691cfdd1185a30d5 Mon Sep 17 00:00:00 2001 From: Marshall Dawson Date: Tue, 16 Jul 2019 15:46:35 -0600 Subject: soc/amd/picasso: Delete northbridge Family 17h devices are designed with a new internal architecture, frequently referred to as the data fabric. Although designed to behave somewhat like the older integrated northbridge designs, the D18Fx definitions are completely new. The previous northbridge.c was copied from stoneyridge which is completely different. Change-Id: Id70cbda99657249179fb8cf5e461dd6a37ec9153 Signed-off-by: Raul E Rangel Reviewed-on: https://review.coreboot.org/c/coreboot/+/41265 Reviewed-by: Furquan Shaikh Reviewed-by: Paul Menzel Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) --- src/soc/amd/picasso/Makefile.inc | 1 - src/soc/amd/picasso/chip.c | 1 - src/soc/amd/picasso/include/soc/northbridge.h | 73 ------- src/soc/amd/picasso/include/soc/pci_devs.h | 42 ---- src/soc/amd/picasso/northbridge.c | 284 -------------------------- 5 files changed, 401 deletions(-) delete mode 100644 src/soc/amd/picasso/include/soc/northbridge.h delete mode 100644 src/soc/amd/picasso/northbridge.c (limited to 'src/soc') diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index 43bb32e7f0..0e5cdf54ce 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -48,7 +48,6 @@ ramstage-y += mca.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c ramstage-y += gpio.c ramstage-y += southbridge.c -ramstage-y += northbridge.c ramstage-y += pmutil.c ramstage-y += acp.c ramstage-y += sata.c diff --git a/src/soc/amd/picasso/chip.c b/src/soc/amd/picasso/chip.c index 05106f569b..afe4c396fe 100644 --- a/src/soc/amd/picasso/chip.c +++ b/src/soc/amd/picasso/chip.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include "chip.h" diff --git a/src/soc/amd/picasso/include/soc/northbridge.h b/src/soc/amd/picasso/include/soc/northbridge.h deleted file mode 100644 index da33b7e043..0000000000 --- a/src/soc/amd/picasso/include/soc/northbridge.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef __PI_PICASSO_NORTHBRIDGE_H__ -#define __PI_PICASSO_NORTHBRIDGE_H__ - -#include -#include - -/* D1F1 - HDA Configuration Registers */ -#define HDA_DEV_CTRL_STATUS 0x60 -#define HDA_NO_SNOOP_EN BIT(11) - -/* D18F0 - HT Configuration Registers */ -#define D18F0_NODE_ID 0x60 -#define D18F0_CPU_CNT 0x62 /* BKDG defines as a field in DWORD 0x60 */ -# define CPU_CNT_MASK 0x1f /* CpuCnt + 1 = no. CPUs */ -#define HT_INIT_CONTROL 0x6c -# define HTIC_BIOSR_DETECT ((1 << 5) | (1 << 9) | (1 << 10)) -# define HTIC_COLD_RST_DET BIT(4) - -/* D18F1 - Address Map Registers */ - -/* MMIO base and limit */ -#define D18F1_MMIO_BASE0_LO 0x80 -# define MMIO_WE (1 << 1) -# define MMIO_RE (1 << 0) -#define D18F1_MMIO_LIMIT0_LO 0x84 -# define MMIO_NP (1 << 7) -#define D18F1_IO_BASE0_LO 0xc0 -#define D18F1_IO_BASE1_LO 0xc8 -#define D18F1_IO_BASE2_LO 0xd0 -#define D18F1_IO_BASE3_LO 0xd8 -#define D18F1_MMIO_BASE7_LO 0xb8 -#define D18F1_MMIO_BASELIM0_HI 0x180 -#define D18F1_MMIO_BASE8_LO 0x1a0 -#define D18F1_MMIO_LIMIT8_LO 0x1a4 -#define D18F1_MMIO_BASE11_LO 0x1b8 -#define D18F1_MMIO_BASELIM8_HI 0x1c0 -#define NB_MMIO_BASE_LO(reg) ((reg) * 2 * sizeof(uint32_t) + (((reg) < 8) \ - ? D18F1_MMIO_BASE0_LO \ - : D18F1_MMIO_BASE8_LO \ - - 8 * sizeof(uint64_t))) -#define NB_MMIO_LIMIT_LO(reg) (NB_MMIO_BASE_LO(reg) + sizeof(uint32_t)) -#define NB_MMIO_BASELIM_HI(reg) ((reg) * sizeof(uint32_t) + (((reg) < 8) \ - ? D18F1_MMIO_BASELIM0_HI \ - : D18F1_MMIO_BASELIM8_HI \ - - 8 * sizeof(uint32_t))) -/* I/O base and limit */ -#define D18F1_IO_BASE0 0xc0 -# define IO_WE (1 << 1) -# define IO_RE (1 << 0) -#define D18F1_IO_LIMIT0 0xc4 -#define NB_IO_BASE(reg) ((reg) * 2 * sizeof(uint32_t) + D18F1_IO_BASE0) -#define NB_IO_LIMIT(reg) (NB_IO_BASE(reg) + sizeof(uint32_t)) - -#define D18F1_DRAM_HOLE 0xf0 -# define DRAM_HOIST_VALID (1 << 1) -# define DRAM_HOLE_VALID (1 << 0) -#define D18F1_VGAEN 0xf4 -# define VGA_ADDR_ENABLE (1 << 0) - -/* Bus A D0F5 - Audio Processor */ -#define ACP_I2S_PIN_CONFIG 0x1400 /* HDA, Soundwire, I2S */ - -void amd_initcpuio(void); - -void domain_enable_resources(struct device *dev); -void domain_set_resources(struct device *dev); -void fam15_finalize(void *chip_info); -void set_warm_reset_flag(void); -int is_warm_reset(void); - -#endif /* __PI_PICASSO_NORTHBRIDGE_H__ */ diff --git a/src/soc/amd/picasso/include/soc/pci_devs.h b/src/soc/amd/picasso/include/soc/pci_devs.h index cfcc5503a2..a97391e86a 100644 --- a/src/soc/amd/picasso/include/soc/pci_devs.h +++ b/src/soc/amd/picasso/include/soc/pci_devs.h @@ -89,48 +89,6 @@ #define HDA1_DEVFN PCI_DEVFN(HDA1_DEV, HDA1_FUNC) #define SOC_HDA1_DEV _SOC_DEV(HDA1_DEV, HDA1_FUNC) -/* HT Configuration */ -#define HT_DEV 0x18 -#define HT_FUNC 0 -#define HT_DEVID 0x15b0 -#define HT_DEVFN PCI_DEVFN(HT_DEV, HT_FUNC) -#define SOC_HT_DEV _SOC_DEV(HT_DEV, HT_FUNC) - -/* Address Maps */ -#define ADDR_DEV 0x18 -#define ADDR_FUNC 1 -#define ADDR_DEVID 0x15b1 -#define ADDR_DEVFN PCI_DEVFN(ADDR_DEV, ADDR_FUNC) -#define SOC_ADDR_DEV _SOC_DEV(ADDR_DEV, ADDR_FUNC) - -/* DRAM Configuration */ -#define DCT_DEV 0x18 -#define DCT_FUNC 2 -#define DCT_DEVID 0x15b2 -#define DCT_DEVFN PCI_DEVFN(DCT_DEV, DCT_FUNC) -#define SOC_DCT_DEV _SOC_DEV(DCT_DEV, DCT_FUNC) - -/* Misc. Configuration */ -#define MISC_DEV 0x18 -#define MISC_FUNC 3 -#define MISC_DEVID 0x15b3 -#define MISC_DEVFN PCI_DEVFN(MISC_DEV, MISC_FUNC) -#define SOC_MISC_DEV _SOC_DEV(MISC_DEV, MISC_FUNC) - -/* PM Configuration */ -#define PM_DEV 0x18 -#define PM_FUNC 4 -#define PM_DEVID 0x15b4 -#define PM_DEVFN PCI_DEVFN(PM_DEV, PM_FUNC) -#define SOC_PM_DEV _SOC_DEV(PM_DEV, PM_FUNC) - -/* Northbridge Configuration */ -#define NB_DEV 0x18 -#define NB_FUNC 5 -#define NB_DEVID 0x15b5 -#define NB_DEVFN PCI_DEVFN(NB_DEV, NB_FUNC) -#define SOC_NB_DEV _SOC_DEV(NB_DEV, NB_FUNC) - /* USB 3.1 */ #define XHCI0_DEV 0x0 #define XHCI0_FUNC 3 diff --git a/src/soc/amd/picasso/northbridge.c b/src/soc/amd/picasso/northbridge.c deleted file mode 100644 index 70ad8d102a..0000000000 --- a/src/soc/amd/picasso/northbridge.c +++ /dev/null @@ -1,284 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "chip.h" - -static void set_io_addr_reg(struct device *dev, u32 nodeid, u32 linkn, u32 reg, - u32 io_min, u32 io_max) -{ - u32 tempreg; - - /* io range allocation. Limit */ - tempreg = (nodeid & 0xf) | ((nodeid & 0x30) << (8 - 4)) | (linkn << 4) - | ((io_max & 0xf0) << (12 - 4)); - pci_write_config32(SOC_ADDR_DEV, reg + 4, tempreg); - tempreg = 3 | ((io_min & 0xf0) << (12 - 4)); /* base: ISA and VGA ? */ - pci_write_config32(SOC_ADDR_DEV, reg, tempreg); -} - -static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, - u32 mmio_min, u32 mmio_max) -{ - u32 tempreg; - - /* io range allocation. Limit */ - tempreg = (nodeid & 0xf) | (linkn << 4) | (mmio_max & 0xffffff00); - pci_write_config32(SOC_ADDR_DEV, reg + 4, tempreg); - tempreg = 3 | (nodeid & 0x30) | (mmio_min & 0xffffff00); - pci_write_config32(SOC_ADDR_DEV, reg, tempreg); -} - -static void read_resources(struct device *dev) -{ - /* - * This MMCONF resource must be reserved in the PCI domain. - * It is not honored by the coreboot resource allocator if it is in - * the CPU_CLUSTER. - */ - mmconf_resource(dev, MMIO_CONF_BASE); -} - -static void set_resource(struct device *dev, struct resource *res, u32 nodeid) -{ - resource_t rbase, rend; - unsigned int reg, link_num; - char buf[50]; - - /* Make certain the resource has actually been set */ - if (!(res->flags & IORESOURCE_ASSIGNED)) - return; - - /* If I have already stored this resource don't worry about it */ - if (res->flags & IORESOURCE_STORED) - return; - - /* Only handle PCI memory and IO resources */ - if (!(res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) - return; - - /* Ensure I am actually looking at a resource of function 1 */ - if ((res->index & 0xffff) < 0x1000) - return; - - /* Get the base address */ - rbase = res->base; - - /* Get the limit (rounded up) */ - rend = resource_end(res); - - /* Get the register and link */ - reg = res->index & 0xfff; /* 4k */ - link_num = IOINDEX_LINK(res->index); - - if (res->flags & IORESOURCE_IO) - set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8); - else if (res->flags & IORESOURCE_MEM) - set_mmio_addr_reg(nodeid, link_num, reg, - (res->index >> 24), rbase >> 8, rend >> 8); - - res->flags |= IORESOURCE_STORED; - snprintf(buf, sizeof(buf), " ", - nodeid, link_num); - report_resource_stored(dev, res, buf); -} - -/** - * I tried to reuse the resource allocation code in set_resource() - * but it is too difficult to deal with the resource allocation magic. - */ - -static void create_vga_resource(struct device *dev) -{ - struct bus *link; - - /* find out which link the VGA card is connected, - * we only deal with the 'first' vga card */ - for (link = dev->link_list ; link ; link = link->next) - if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) - break; - - /* no VGA card installed */ - if (link == NULL) - return; - - printk(BIOS_DEBUG, "VGA: %s has VGA device\n", dev_path(dev)); - /* Route A0000-BFFFF, IO 3B0-3BB 3C0-3DF */ - pci_write_config32(SOC_ADDR_DEV, D18F1_VGAEN, VGA_ADDR_ENABLE); -} - -static void set_resources(struct device *dev) -{ - struct bus *bus; - struct resource *res; - - - /* do we need this? */ - create_vga_resource(dev); - - /* Set each resource we have found */ - for (res = dev->resource_list ; res ; res = res->next) - set_resource(dev, res, 0); - - for (bus = dev->link_list ; bus ; bus = bus->next) - if (bus->children) - assign_resources(bus); -} - -static void northbridge_fill_ssdt_generator(const struct device *device) -{ - msr_t msr; - char pscope[] = "\\_SB.PCI0"; - - acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_pop_len(); -} - -static unsigned long agesa_write_acpi_tables(const struct device *device, - unsigned long current, - acpi_rsdp_t *rsdp) -{ - /* TODO - different mechanism to collect this info for Family 17h */ - return current; -} - -static struct device_operations northbridge_operations = { - .read_resources = read_resources, - .set_resources = set_resources, - .enable_resources = pci_dev_enable_resources, - .acpi_fill_ssdt = northbridge_fill_ssdt_generator, - .write_acpi_tables = agesa_write_acpi_tables, -}; - -static const struct pci_driver family15_northbridge __pci_driver = { - .ops = &northbridge_operations, - .vendor = PCI_VENDOR_ID_AMD, - .device = PCI_DEVICE_ID_AMD_15H_MODEL_707F_NB_HT, -}; - -/* - * Enable VGA cycles. Set memory ranges of the FCH legacy devices (TPM, HPET, - * BIOS RAM, Watchdog Timer, IOAPIC and ACPI) as non-posted. Set remaining - * MMIO to posted. Route all I/O to the southbridge. - */ -void amd_initcpuio(void) -{ - uintptr_t topmem = bsp_topmem(); - uintptr_t base, limit; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - pci_write_config32(SOC_ADDR_DEV, D18F1_VGAEN, VGA_ADDR_ENABLE); - - /* Non-posted: range(HPET-LAPIC) or 0xfed00000 through 0xfee00000-1 */ - base = (HPET_BASE_ADDRESS >> 8) | MMIO_WE | MMIO_RE; - limit = (ALIGN_DOWN(LOCAL_APIC_ADDR - 1, 64 * KiB) >> 8) | MMIO_NP; - pci_write_config32(SOC_ADDR_DEV, NB_MMIO_LIMIT_LO(0), limit); - pci_write_config32(SOC_ADDR_DEV, NB_MMIO_BASE_LO(0), base); - - /* Remaining PCI hole posted MMIO: TOM-HPET (TOM through 0xfed00000-1 */ - base = (topmem >> 8) | MMIO_WE | MMIO_RE; - limit = ALIGN_DOWN(HPET_BASE_ADDRESS - 1, 64 * KiB) >> 8; - pci_write_config32(SOC_ADDR_DEV, NB_MMIO_LIMIT_LO(1), limit); - pci_write_config32(SOC_ADDR_DEV, NB_MMIO_BASE_LO(1), base); - - /* Route all I/O downstream */ - base = 0 | IO_WE | IO_RE; - limit = ALIGN_DOWN(0xffff, 4 * KiB); - pci_write_config32(SOC_ADDR_DEV, NB_IO_LIMIT(0), limit); - pci_write_config32(SOC_ADDR_DEV, NB_IO_BASE(0), base); -} - -void fam15_finalize(void *chip_info) -{ - u32 value; - - /* disable No Snoop */ - value = pci_read_config32(SOC_HDA0_DEV, HDA_DEV_CTRL_STATUS); - value &= ~HDA_NO_SNOOP_EN; - pci_write_config32(SOC_HDA0_DEV, HDA_DEV_CTRL_STATUS, value); -} - -void domain_set_resources(struct device *dev) -{ - uint64_t uma_base = get_uma_base(); - uint32_t uma_size = get_uma_size(); - uint32_t mem_useable = (uintptr_t)cbmem_top(); - msr_t tom = rdmsr(TOP_MEM); - msr_t high_tom = rdmsr(TOP_MEM2); - uint64_t high_mem_useable; - int idx = 0x10; - - /* 0x0 -> 0x9ffff */ - ram_resource(dev, idx++, 0, 0xa0000 / KiB); - - /* 0xa0000 -> 0xbffff: legacy VGA */ - mmio_resource(dev, idx++, 0xa0000 / KiB, 0x20000 / KiB); - - /* 0xc0000 -> 0xfffff: Option ROM */ - reserved_ram_resource(dev, idx++, 0xc0000 / KiB, 0x40000 / KiB); - - /* - * 0x100000 (1MiB) -> low top useable RAM - * cbmem_top() accounts for low UMA and TSEG if they are used. - */ - ram_resource(dev, idx++, (1 * MiB) / KiB, - (mem_useable - (1 * MiB)) / KiB); - - /* Low top useable RAM -> Low top RAM (bottom pci mmio hole) */ - reserved_ram_resource(dev, idx++, mem_useable / KiB, - (tom.lo - mem_useable) / KiB); - - /* If there is memory above 4GiB */ - if (high_tom.hi) { - /* 4GiB -> high top useable */ - if (uma_base >= (4ull * GiB)) - high_mem_useable = uma_base; - else - high_mem_useable = ((uint64_t)high_tom.lo | - ((uint64_t)high_tom.hi << 32)); - - ram_resource(dev, idx++, (4ull * GiB) / KiB, - ((high_mem_useable - (4ull * GiB)) / KiB)); - - /* High top useable RAM -> high top RAM */ - if (uma_base >= (4ull * GiB)) { - reserved_ram_resource(dev, idx++, uma_base / KiB, - uma_size / KiB); - } - } - - assign_resources(dev->link_list); -} -- cgit v1.2.3