From 9995418166bc4074de2a99aa50e74f8a88196c39 Mon Sep 17 00:00:00 2001 From: Nico Huber Date: Wed, 29 May 2019 23:33:06 +0200 Subject: soc/intel: Replace UART_BASE() and friends with a Kconfig Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident on APL at least. It is used outside of soc/intel/ scope, e.g. to con- figure SeaBIOS. As we only ever configure a single UART for the coreboot console, we don't need different addresses for each possible UART. Which saves us a lot of code. Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309 Signed-off-by: Nico Huber Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph --- src/soc/intel/apollolake/Kconfig | 5 +++++ src/soc/intel/apollolake/include/soc/iomap.h | 8 -------- src/soc/intel/cannonlake/Kconfig | 5 +++++ src/soc/intel/cannonlake/include/soc/iomap.h | 8 -------- src/soc/intel/common/acpi/acpi_debug.asl | 2 +- src/soc/intel/common/block/uart/uart.c | 9 ++++----- src/soc/intel/icelake/Kconfig | 5 +++++ src/soc/intel/icelake/include/soc/iomap.h | 8 -------- src/soc/intel/skylake/Kconfig | 5 +++++ src/soc/intel/skylake/include/soc/iomap.h | 7 ------- 10 files changed, 25 insertions(+), 37 deletions(-) (limited to 'src/soc') diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig index 217d1eab24..1f819eab06 100644 --- a/src/soc/intel/apollolake/Kconfig +++ b/src/soc/intel/apollolake/Kconfig @@ -361,6 +361,11 @@ config CPU_BCLK_MHZ int default 100 +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xddffc000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + config APL_SKIP_SET_POWER_LIMITS bool default n diff --git a/src/soc/intel/apollolake/include/soc/iomap.h b/src/soc/intel/apollolake/include/soc/iomap.h index 8e2986d8b7..4b82365284 100644 --- a/src/soc/intel/apollolake/include/soc/iomap.h +++ b/src/soc/intel/apollolake/include/soc/iomap.h @@ -58,12 +58,4 @@ #define EARLY_I2C_BASE_ADDRESS 0xfe020000 #define EARLY_I2C_BASE(x) (EARLY_I2C_BASE_ADDRESS + (0x1000 * (x))) -#define UART_BASE_SIZE 0x1000 - -#define UART_BASE_0_ADDRESS 0xddffc000 -/* UART BARs are 4KB in size */ -#define UART_BASE_0_ADDR(x) (UART_BASE_0_ADDRESS + (2 * \ - UART_BASE_SIZE * (x))) -#define UART_BASE(x) UART_BASE_0_ADDR(x) - #endif /* _SOC_APOLLOLAKE_IOMAP_H_ */ diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig index e524275b8f..76906b2548 100644 --- a/src/soc/intel/cannonlake/Kconfig +++ b/src/soc/intel/cannonlake/Kconfig @@ -223,6 +223,11 @@ config SOC_INTEL_I2C_DEV_MAX default 4 if SOC_INTEL_CANNONLAKE_PCH_H default 6 +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xfe032000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + # Clock divider parameters for 115200 baud rate config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL hex diff --git a/src/soc/intel/cannonlake/include/soc/iomap.h b/src/soc/intel/cannonlake/include/soc/iomap.h index 100bd11356..1ebaf3f7b6 100644 --- a/src/soc/intel/cannonlake/include/soc/iomap.h +++ b/src/soc/intel/cannonlake/include/soc/iomap.h @@ -29,14 +29,6 @@ #define PCH_TRACE_HUB_BASE_ADDRESS 0xfc800000 #define PCH_TRACE_HUB_BASE_SIZE 0x00800000 -#define UART_BASE_SIZE 0x1000 - -#define UART_BASE_0_ADDRESS 0xfe032000 -/* Both UART BAR 0 and 1 are 4KB in size */ -#define UART_BASE_0_ADDR(x) (UART_BASE_0_ADDRESS + (2 * \ - UART_BASE_SIZE * (x))) -#define UART_BASE(x) UART_BASE_0_ADDR(x) - #define EARLY_I2C_BASE_ADDRESS 0xfe040000 #define EARLY_I2C_BASE(x) (EARLY_I2C_BASE_ADDRESS + (0x1000 * (x))) diff --git a/src/soc/intel/common/acpi/acpi_debug.asl b/src/soc/intel/common/acpi/acpi_debug.asl index 6c52bbfd77..0c0be154e6 100644 --- a/src/soc/intel/common/acpi/acpi_debug.asl +++ b/src/soc/intel/common/acpi/acpi_debug.asl @@ -59,7 +59,7 @@ Method (APRT, 1, Serialized) #if CONFIG(DRIVERS_UART_8250MEM_32) OperationRegion (UBAR, SystemMemory, - UART_BASE_0_ADDR(CONFIG_UART_FOR_CONSOLE), 24) + CONFIG_CONSOLE_UART_BASE_ADDRESS, 24) Field (UBAR, AnyAcc, NoLock, Preserve) { TDR, 8, /* Transmit Data Register BAR + 0x000 */ diff --git a/src/soc/intel/common/block/uart/uart.c b/src/soc/intel/common/block/uart/uart.c index 84ba1ee0f2..9d820ffd7e 100644 --- a/src/soc/intel/common/block/uart/uart.c +++ b/src/soc/intel/common/block/uart/uart.c @@ -47,7 +47,7 @@ static void uart_lpss_init(uintptr_t baseaddr) uintptr_t uart_platform_base(int idx) { if (idx == CONFIG_UART_FOR_CONSOLE) - return UART_BASE_0_ADDR(CONFIG_UART_FOR_CONSOLE); + return CONFIG_CONSOLE_UART_BASE_ADDRESS; return 0; } #endif @@ -137,8 +137,7 @@ static void uart_configure_gpio_pads(void) void uart_bootblock_init(void) { /* Program UART BAR0, command, reset and clock register */ - uart_common_init(uart_get_device(), - UART_BASE(CONFIG_UART_FOR_CONSOLE)); + uart_common_init(uart_get_device(), CONFIG_CONSOLE_UART_BASE_ADDRESS); /* Configure the 2 pads per UART. */ uart_configure_gpio_pads(); @@ -155,8 +154,8 @@ static void uart_read_resources(struct device *dev) uart_is_debug_controller(dev)) { struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); /* Need to set the base and size for the resource allocator. */ - res->base = UART_BASE(CONFIG_UART_FOR_CONSOLE); - res->size = UART_BASE_SIZE; + res->base = CONFIG_CONSOLE_UART_BASE_ADDRESS; + res->size = 0x1000; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } diff --git a/src/soc/intel/icelake/Kconfig b/src/soc/intel/icelake/Kconfig index a4b46baab5..052e37dadb 100644 --- a/src/soc/intel/icelake/Kconfig +++ b/src/soc/intel/icelake/Kconfig @@ -138,6 +138,11 @@ config SOC_INTEL_UART_DEV_MAX int default 3 +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xfe032000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + # Clock divider parameters for 115200 baud rate config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL hex diff --git a/src/soc/intel/icelake/include/soc/iomap.h b/src/soc/intel/icelake/include/soc/iomap.h index 7c42b57730..218b8bfa60 100644 --- a/src/soc/intel/icelake/include/soc/iomap.h +++ b/src/soc/intel/icelake/include/soc/iomap.h @@ -28,14 +28,6 @@ #define PCH_TRACE_HUB_BASE_ADDRESS 0xfc800000 #define PCH_TRACE_HUB_BASE_SIZE 0x00800000 -#define UART_BASE_SIZE 0x1000 - -#define UART_BASE_0_ADDRESS 0xfe032000 -/* Both UART BAR 0 and 1 are 4KB in size */ -#define UART_BASE_0_ADDR(x) (UART_BASE_0_ADDRESS + (2 * \ - UART_BASE_SIZE * (x))) -#define UART_BASE(x) UART_BASE_0_ADDR(x) - #define EARLY_I2C_BASE_ADDRESS 0xfe040000 #define EARLY_I2C_BASE(x) (EARLY_I2C_BASE_ADDRESS + (0x1000 * (x))) diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index fcfe2b6591..626b5f80f0 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -289,6 +289,11 @@ config CPU_BCLK_MHZ int default 100 +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xfe030000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + # Clock divider parameters for 115200 baud rate config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL hex diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h index 628a272a54..c73d766953 100644 --- a/src/soc/intel/skylake/include/soc/iomap.h +++ b/src/soc/intel/skylake/include/soc/iomap.h @@ -25,13 +25,6 @@ #define PCH_PRESERVED_BASE_ADDRESS 0xfc800000 #define PCH_PRESERVED_BASE_SIZE 0x02000000 -#define UART_BASE_SIZE 0x1000 -#define UART_BASE_0_ADDRESS 0xfe030000 -/* Both UART BAR 0 and 1 are 4KB in size */ -#define UART_BASE_0_ADDR(x) (UART_BASE_0_ADDRESS + (2 * \ - UART_BASE_SIZE * (x))) -#define UART_BASE(x) UART_BASE_0_ADDR(x) - #define EARLY_I2C_BASE_ADDRESS 0xfe040000 #define EARLY_I2C_BASE(x) (EARLY_I2C_BASE_ADDRESS + (0x1000 * (x))) -- cgit v1.2.3