From 7ebabf9cccafc8bc0a8fedfb1e0a4febc25e964e Mon Sep 17 00:00:00 2001 From: Abhay Kumar Date: Sat, 9 Dec 2017 10:01:02 -0800 Subject: soc/intel/cannonlake: Initialize DDI-A lane in Normal mode Enable DDI-A (eDP) when pre-OS graphics is not Loaded or in normal mode. This will make sure that kernel will detect eDP. TEST=Edp should come up in normal mode. Change-Id: I6353020f892f2d7b75997eace88b3074adc32aef Signed-off-by: Abhay Kumar Reviewed-on: https://review.coreboot.org/22799 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik Reviewed-by: Aaron Durbin --- src/soc/intel/cannonlake/graphics.c | 38 +++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'src/soc') diff --git a/src/soc/intel/cannonlake/graphics.c b/src/soc/intel/cannonlake/graphics.c index 5cf0ec83ac..1487a31c9b 100644 --- a/src/soc/intel/cannonlake/graphics.c +++ b/src/soc/intel/cannonlake/graphics.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -27,6 +28,43 @@ uintptr_t fsp_soc_get_igd_bar(void) return graphics_get_memory_base(); } +void graphics_soc_init(struct device *dev) +{ + uint32_t ddi_buf_ctl; + + /* + * Enable DDI-A (eDP) 4-lane operation if the link is not up yet. + * This will allow the kernel to use 4-lane eDP links properly + * if the VBIOS or GOP driver do not execute. + */ + ddi_buf_ctl = graphics_gtt_read(DDI_BUF_CTL_A); + if (!acpi_is_wakeup_s3() && !(ddi_buf_ctl & DDI_BUF_CTL_ENABLE)) { + ddi_buf_ctl |= (DDI_A_4_LANES | DDI_INIT_DISPLAY_DETECTED | + DDI_BUF_IS_IDLE); + graphics_gtt_write(DDI_BUF_CTL_A, ddi_buf_ctl); + } + + /* + * GFX PEIM module inside FSP binary is taking care of graphics + * initialization based on INTEL_GMA_ADD_VBT_DATA_FILE Kconfig + * option and input VBT file. Hence no need to load/execute legacy VGA + * OpROM in order to initialize GFX. + * + * In case of non-FSP solution, SoC need to select VGA_ROM_RUN + * Kconfig to perform GFX initialization through VGA OpRom. + */ + if (IS_ENABLED(CONFIG_INTEL_GMA_ADD_VBT_DATA_FILE)) + return; + + /* IGD needs to Bus Master */ + uint32_t reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Initialize PCI device, load/execute BIOS Option ROM */ + pci_dev_init(dev); +} + uintptr_t graphics_soc_write_acpi_opregion(struct device *device, uintptr_t current, struct acpi_rsdp *rsdp) { -- cgit v1.2.3