From 789aefc2272c2ffb3ca2c9380ccdc1a2288f2534 Mon Sep 17 00:00:00 2001 From: Raul E Rangel Date: Mon, 11 May 2020 16:26:35 -0600 Subject: soc/amd/picasso: Mark FCH MMIO addresses as non-posted Immediately following FSP-S, update the data fabric routing registers to make the region between HPET and LAPIC as non-posted. If AGESA is modified to do this, we can delete data_fabric_util.c. If AGESA is modified to not program the registers, then we can simplify data_fabric_set_mmio_np(). BUG=b:147042464, b:156296146 TEST=boot trembyle Change-Id: Idbafaac158f5a4c533d2d88db79bb4d6244e5355 Signed-off-by: Marshall Dawson Signed-off-by: Raul E Rangel Reviewed-on: https://review.coreboot.org/c/coreboot/+/41268 Reviewed-by: Furquan Shaikh Tested-by: build bot (Jenkins) --- src/soc/amd/picasso/Makefile.inc | 1 + src/soc/amd/picasso/chip.c | 2 + src/soc/amd/picasso/data_fabric_util.c | 117 ++++++++++++++++++++++++++ src/soc/amd/picasso/include/soc/data_fabric.h | 2 + 4 files changed, 122 insertions(+) create mode 100644 src/soc/amd/picasso/data_fabric_util.c (limited to 'src/soc') diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index 0e5cdf54ce..e015fbe057 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -44,6 +44,7 @@ verstage-y += tsc_freq.c ramstage-y += i2c.c ramstage-y += chip.c ramstage-y += cpu.c +ramstage-y += data_fabric_util.c ramstage-y += mca.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c ramstage-y += gpio.c diff --git a/src/soc/amd/picasso/chip.c b/src/soc/amd/picasso/chip.c index afe4c396fe..5c5b79d136 100644 --- a/src/soc/amd/picasso/chip.c +++ b/src/soc/amd/picasso/chip.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include "chip.h" @@ -100,6 +101,7 @@ static void soc_init(void *chip_info) { fsp_silicon_init(acpi_is_wakeup_s3()); + data_fabric_set_mmio_np(); southbridge_init(chip_info); setup_bsp_ramtop(); } diff --git a/src/soc/amd/picasso/data_fabric_util.c b/src/soc/amd/picasso/data_fabric_util.c new file mode 100644 index 0000000000..a375b84477 --- /dev/null +++ b/src/soc/amd/picasso/data_fabric_util.c @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include +#include + +static void disable_mmio_reg(int reg) +{ + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg), + IOMS0_FABRIC_ID << MMIO_DST_FABRIC_ID_SHIFT); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(reg), 0); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(reg), 0); +} + +static bool is_mmio_reg_disabled(int reg) +{ + uint32_t val = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg)); + return !(val & ((MMIO_WE | MMIO_RE))); +} + +static int find_unused_mmio_reg(void) +{ + unsigned int i; + + for (i = 0; i < NUM_NB_MMIO_REGS; i++) { + if (is_mmio_reg_disabled(i)) + return i; + } + return -1; +} + +void data_fabric_set_mmio_np(void) +{ + /* + * Mark region from HPET-LAPIC or 0xfed00000-0xfee00000-1 as NP. + * + * AGESA has already programmed the NB MMIO routing, however nothing + * is yet marked as non-posted. + * + * If there exists an overlapping routing base/limit pair, trim its + * base or limit to avoid the new NP region. If any pair exists + * completely within HPET-LAPIC range, remove it. If any pair surrounds + * HPET-LAPIC, it must be split into two regions. + * + * TODO(b/156296146): Remove the settings from AGESA and allow coreboot + * to own everything. If not practical, consider erasing all settings + * and have coreboot reprogram them. At that time, make the source + * below more flexible. + * * Note that the code relies on the granularity of the HPET and + * LAPIC addresses being sufficiently large that the shifted limits + * +/-1 are always equivalent to the non-shifted values +/-1. + */ + + unsigned int i; + int reg; + uint32_t base, limit, ctrl; + const uint32_t np_bot = HPET_BASE_ADDRESS >> D18F0_MMIO_SHIFT; + const uint32_t np_top = (LOCAL_APIC_ADDR - 1) >> D18F0_MMIO_SHIFT; + + for (i = 0; i < NUM_NB_MMIO_REGS; i++) { + /* Adjust all registers that overlap */ + ctrl = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(i)); + if (!(ctrl & (MMIO_WE | MMIO_RE))) + continue; /* not enabled */ + + base = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(i)); + limit = pci_read_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(i)); + + if (base > np_top || limit < np_bot) + continue; /* no overlap at all */ + + if (base >= np_bot && limit <= np_top) { + disable_mmio_reg(i); /* 100% within, so remove */ + continue; + } + + if (base < np_bot && limit > np_top) { + /* Split the configured region */ + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(i), np_bot - 1); + reg = find_unused_mmio_reg(); + if (reg < 0) { + /* Although a pair could be freed later, this condition is + * very unusual and deserves analysis. Flag an error and + * leave the topmost part unconfigured. */ + printk(BIOS_ERR, + "Error: Not enough NB MMIO routing registers\n"); + continue; + } + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(reg), np_top + 1); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(reg), limit); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg), ctrl); + continue; + } + + /* If still here, adjust only the base or limit */ + if (base <= np_bot) + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(i), np_bot - 1); + else + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(i), np_top + 1); + } + + reg = find_unused_mmio_reg(); + if (reg < 0) { + printk(BIOS_ERR, "Error: cannot configure region as NP\n"); + return; + } + + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_BASE(reg), np_bot); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_LIMIT(reg), np_top); + pci_write_config32(SOC_DF_F0_DEV, NB_MMIO_CONTROL(reg), + (IOMS0_FABRIC_ID << MMIO_DST_FABRIC_ID_SHIFT) | MMIO_NP | MMIO_WE + | MMIO_RE); +} diff --git a/src/soc/amd/picasso/include/soc/data_fabric.h b/src/soc/amd/picasso/include/soc/data_fabric.h index af9c200ce2..39906e8f95 100644 --- a/src/soc/amd/picasso/include/soc/data_fabric.h +++ b/src/soc/amd/picasso/include/soc/data_fabric.h @@ -24,4 +24,6 @@ #define NB_MMIO_LIMIT(reg) ((reg) * 4 * sizeof(uint32_t) + D18F0_MMIO_LIMIT0) #define NB_MMIO_CONTROL(reg) ((reg) * 4 * sizeof(uint32_t) + D18F0_MMIO_CTRL0) +void data_fabric_set_mmio_np(void); + #endif /* __SOC_PICASSO_DATAFABRIC_H__ */ -- cgit v1.2.3