From 695f2feaf8f9dd7e77749cdafbd6422fffc2be3e Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Wed, 5 Dec 2018 12:51:23 -0800 Subject: soc/intel/cannonlake: Fix I2C clock input The input clock for the I2C controllers was set at 133MHz but should really be 216MHz according to the kernel: https://patchwork.kernel.org/patch/10408729/ "Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C." This change was tested on a sarien board where an I2C trackpad that was measuring ~700MHz on I2C and is now measuring ~380MHz. Change-Id: I792d1f013da5538a2b8157e2f99b754ca7b6bf70 Signed-off-by: Duncan Laurie Reviewed-on: https://review.coreboot.org/c/30061 Reviewed-by: Aaron Durbin Reviewed-by: Furquan Shaikh Reviewed-by: Lijian Zhao Tested-by: build bot (Jenkins) --- src/soc/intel/cannonlake/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/soc') diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig index 78c6dfe62c..9e007b656e 100644 --- a/src/soc/intel/cannonlake/Kconfig +++ b/src/soc/intel/cannonlake/Kconfig @@ -197,7 +197,7 @@ config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ int - default 133 + default 216 config SOC_INTEL_COMMON_BLOCK_GSPI_MAX int -- cgit v1.2.3