From 6575306663987225080abbe3d5b1e70ba5302e84 Mon Sep 17 00:00:00 2001 From: Garrett Kirkendall Date: Wed, 7 Mar 2018 16:12:11 -0600 Subject: soc/amd/stoneyridge: Configure FCH for TPM In preparation for moving AGESA calls out of the bootblock: * Add sb_tpm_decode to enable FCH decoding of TPM 1.2 regions and Legacy TPM IO 0x7f-0x7e and 0xef-0xee * Modify sb_tpm_decode_spi to additionally call sb_tpm_decode. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: I0e2399e113c765393209dd11fd835fc758cf3029 Signed-off-by: Garrett Kirkendall Reviewed-on: https://review.coreboot.org/25027 Tested-by: build bot (Jenkins) Reviewed-by: Richard Spiegel --- src/soc/amd/stoneyridge/include/soc/southbridge.h | 5 ++++ src/soc/amd/stoneyridge/southbridge.c | 30 +++++++++++++++++++++++ 2 files changed, 35 insertions(+) (limited to 'src/soc') diff --git a/src/soc/amd/stoneyridge/include/soc/southbridge.h b/src/soc/amd/stoneyridge/include/soc/southbridge.h index cccdf9736f..434877e15e 100644 --- a/src/soc/amd/stoneyridge/include/soc/southbridge.h +++ b/src/soc/amd/stoneyridge/include/soc/southbridge.h @@ -186,6 +186,10 @@ #define LPC_MISC_CONTROL_BITS 0x78 #define LPC_NOHOG BIT(0) +#define LPC_TRUSTED_PLATFORM_MODULE 0x7c +#define TPM_12_EN BIT(0) +#define TPM_LEGACY_EN BIT(2) + #define LPC_WIDEIO2_GENERIC_PORT 0x90 /* @@ -357,6 +361,7 @@ void sb_pci_port80(void); void sb_read_mode(u32 mode); void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm); void sb_set_readspeed(u16 norm, u16 fast); +void sb_tpm_decode(void); void sb_tpm_decode_spi(void); void lpc_wideio_512_window(uint16_t base); void lpc_wideio_16_window(uint16_t base); diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c index 367c565486..bb3157d395 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/southbridge.c @@ -470,8 +470,38 @@ void sb_read_mode(u32 mode) & ~SPI_READ_MODE_MASK) | mode); } +/* + * Enable FCH to decode TPM associated Memory and IO regions + * + * Enable decoding of TPM cycles defined in TPM 1.2 spec + * Enable decoding of legacy TPM addresses: IO addresses 0x7f- + * 0x7e and 0xef-0xee. + * This function should be called if TPM is connected in any way to the FCH and + * conforms to the regions decoded. + * Absent any other routing configuration the TPM cycles will be claimed by the + * LPC bus + */ +void sb_tpm_decode(void) +{ + u32 value; + + value = pci_read_config32(SOC_LPC_DEV, LPC_TRUSTED_PLATFORM_MODULE); + value |= TPM_12_EN | TPM_LEGACY_EN; + pci_write_config32(SOC_LPC_DEV, LPC_TRUSTED_PLATFORM_MODULE, value); +} + +/* + * Enable FCH to decode TPM associated Memory and IO regions to SPI + * + * This should be used if TPM is connected to SPI bus. + * Assumes SPI address space is already configured via a call to sb_spibase(). + */ void sb_tpm_decode_spi(void) { + /* Enable TPM decoding to FCH */ + sb_tpm_decode(); + + /* Route TPM accesses to SPI */ u32 spibase = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER); pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, spibase -- cgit v1.2.3