From 4d56a0625516ba436903d59d9c0a4a13827d89be Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Sat, 22 Dec 2018 16:11:52 +0100 Subject: nb/intel/broadwell: Add an option for where verstage starts Previously broadwell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. With a separate verstage the romstage becomes an RW stage. The mrc.bin however is only added to the RO COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I900233cadb3c76da329fb98f93917570e633365f Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384 Reviewed-by: Nico Huber Reviewed-by: Matt DeVillier Tested-by: build bot (Jenkins) --- src/soc/intel/broadwell/Kconfig | 25 ++++++++++++++++++++++++- src/soc/intel/broadwell/Makefile.inc | 2 ++ src/soc/intel/broadwell/romstage/raminit.c | 7 ++++++- 3 files changed, 32 insertions(+), 2 deletions(-) (limited to 'src/soc') diff --git a/src/soc/intel/broadwell/Kconfig b/src/soc/intel/broadwell/Kconfig index 9dd2f4f414..b685391af9 100644 --- a/src/soc/intel/broadwell/Kconfig +++ b/src/soc/intel/broadwell/Kconfig @@ -67,9 +67,25 @@ config PCIEXP_L1_SUB_STATE bool default y +config BROADWELL_VBOOT_IN_BOOTBLOCK + depends on VBOOT + bool "Start verstage in bootblock" + default y + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_SEPARATE_VERSTAGE + help + Broadwell can either start verstage in a separate stage + right after the bootblock has run or it can start it + after romstage for compatibility reasons. + Broadwell however uses a mrc.bin to initialse memory which + needs to be located at a fixed offset. Therefore even with + a separate verstage starting after the bootblock that same + binary is used meaning a jump is made from RW to the RO region + and back to the RW region after the binary is done. + config VBOOT select VBOOT_MUST_REQUEST_DISPLAY - select VBOOT_STARTS_IN_ROMSTAGE + select VBOOT_STARTS_IN_ROMSTAGE if !BROADWELL_VBOOT_IN_BOOTBLOCK config MMCONF_BASE_ADDRESS hex @@ -141,6 +157,13 @@ config MRC_BIN_ADDRESS hex default 0xfffa0000 +# The UEFI System Agent binary needs to be at a fixed offset in the flash +# and can therefore only reside in the COREBOOT fmap region +config RO_REGION_ONLY + string + depends on VBOOT + default "mrc.bin" + endif # HAVE_MRC config PRE_GRAPHICS_DELAY diff --git a/src/soc/intel/broadwell/Makefile.inc b/src/soc/intel/broadwell/Makefile.inc index eab8b37ba2..40017eb3ec 100644 --- a/src/soc/intel/broadwell/Makefile.inc +++ b/src/soc/intel/broadwell/Makefile.inc @@ -49,6 +49,7 @@ romstage-y += pei_data.c ramstage-y += pmutil.c romstage-y += pmutil.c smm-y += pmutil.c +verstage-y += pmutil.c ramstage-y += ramstage.c ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c ramstage-y += sata.c @@ -70,6 +71,7 @@ ramstage-y += tsc_freq.c romstage-y += tsc_freq.c smm-y += tsc_freq.c postcar-y += tsc_freq.c +verstage-y += tsc_freq.c bootblock-$(CONFIG_USBDEBUG) += usb_debug.c romstage-$(CONFIG_USBDEBUG) += usb_debug.c ramstage-$(CONFIG_USBDEBUG) += usb_debug.c diff --git a/src/soc/intel/broadwell/romstage/raminit.c b/src/soc/intel/broadwell/romstage/raminit.c index 8d43907f8a..fc8b7c6984 100644 --- a/src/soc/intel/broadwell/romstage/raminit.c +++ b/src/soc/intel/broadwell/romstage/raminit.c @@ -45,6 +45,8 @@ void raminit(struct pei_data *pei_data) struct memory_info *mem_info; pei_wrapper_entry_t entry; int ret; + struct cbfsf f; + uint32_t type = CBFS_TYPE_MRC; broadwell_fill_pei_data(pei_data); @@ -77,7 +79,10 @@ void raminit(struct pei_data *pei_data) } /* Determine if mrc.bin is in the cbfs. */ - entry = cbfs_boot_map_with_leak("mrc.bin", CBFS_TYPE_MRC, NULL); + if (cbfs_locate_file_in_region(&f, "COREBOOT", "mrc.bin", &type) < 0) + die("mrc.bin not found!"); + /* We don't care about leaking the mapping */ + entry = (pei_wrapper_entry_t)rdev_mmap_full(&f.data); if (entry == NULL) { printk(BIOS_DEBUG, "Couldn't find mrc.bin\n"); return; -- cgit v1.2.3