From 91595724e7f302e0a876f0507e307f37f5871a7d Mon Sep 17 00:00:00 2001
From: Philipp Hug <philipp@hug.cx>
Date: Thu, 13 Sep 2018 22:18:06 +0200
Subject: soc/sifive/fu540: Initialize SDRAM

Based on SiFive bootloader code

Change-Id: I71043ce9e458e25e64da28d53cd36b02d2e22acc
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/28604
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
 src/soc/sifive/fu540/ux00ddr.h | 202 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 202 insertions(+)
 create mode 100644 src/soc/sifive/fu540/ux00ddr.h

(limited to 'src/soc/sifive/fu540/ux00ddr.h')

diff --git a/src/soc/sifive/fu540/ux00ddr.h b/src/soc/sifive/fu540/ux00ddr.h
new file mode 100644
index 0000000000..fc5e110421
--- /dev/null
+++ b/src/soc/sifive/fu540/ux00ddr.h
@@ -0,0 +1,202 @@
+/* Copyright (c) 2018 SiFive, Inc */
+/* SPDX-License-Identifier: Apache-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* See the file LICENSE for further information */
+
+#ifndef _SIFIVE_UX00DDR_H
+#define _SIFIVE_UX00DDR_H
+
+#ifndef __ASSEMBLER__
+
+#include <stdint.h>
+#include <stddef.h>
+
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+
+#define DRAM_CLASS_OFFSET                   8
+#define DRAM_CLASS_DDR4                     0xA
+#define OPTIMAL_RMODW_EN_OFFSET             0
+#define DISABLE_RD_INTERLEAVE_OFFSET        16
+#define OUT_OF_RANGE_OFFSET                 1
+#define MULTIPLE_OUT_OF_RANGE_OFFSET        2
+#define PORT_COMMAND_CHANNEL_ERROR_OFFSET   7
+#define MC_INIT_COMPLETE_OFFSET             8
+#define LEVELING_OPERATION_COMPLETED_OFFSET 22
+#define DFI_PHY_WRLELV_MODE_OFFSET          24
+#define DFI_PHY_RDLVL_MODE_OFFSET           24
+#define DFI_PHY_RDLVL_GATE_MODE_OFFSET      0
+#define VREF_EN_OFFSET                      24
+#define PORT_ADDR_PROTECTION_EN_OFFSET      0
+#define AXI0_ADDRESS_RANGE_ENABLE           8
+#define AXI0_RANGE_PROT_BITS_0_OFFSET       24
+#define RDLVL_EN_OFFSET                     16
+#define RDLVL_GATE_EN_OFFSET                24
+#define WRLVL_EN_OFFSET                     0
+
+#define PHY_RX_CAL_DQ0_0_OFFSET             0
+#define PHY_RX_CAL_DQ1_0_OFFSET             16
+
+static inline void phy_reset(volatile uint32_t *ddrphyreg, const uint32_t *physettings) {
+  unsigned int i;
+  for (i=1152;i<=1214;i++) {
+    uint32_t physet = physettings[i];
+    /*if (physet!=0)*/ ddrphyreg[i] = physet;
+  }
+  for (i=0;i<=1151;i++) {
+    uint32_t physet = physettings[i];
+    /*if (physet!=0)*/ ddrphyreg[i] = physet;
+  }
+}
+
+
+static inline void ux00ddr_writeregmap(size_t ahbregaddr, const uint32_t *ctlsettings, const uint32_t *physettings) {
+  volatile uint32_t *ddrctlreg = (volatile uint32_t *) ahbregaddr;
+  volatile uint32_t *ddrphyreg = ((volatile uint32_t *) ahbregaddr) + (0x2000 / sizeof(uint32_t));
+
+  unsigned int i;
+  for (i=0;i<=264;i++) {
+    uint32_t ctlset = ctlsettings[i];
+    /*if (ctlset!=0)*/ ddrctlreg[i] = ctlset;
+  }
+
+  phy_reset(ddrphyreg, physettings);
+}
+
+static inline void ux00ddr_start(size_t ahbregaddr, size_t filteraddr, size_t ddrend) {
+  // START register at ddrctl register base offset 0
+  uint32_t regdata = _REG32(0<<2, ahbregaddr);
+  regdata |= 0x1;
+  _REG32(0<<2, ahbregaddr) = regdata;
+  // WAIT for initialization complete : bit 8 of INT_STATUS (DENALI_CTL_132) 0x210
+  while ((_REG32(132<<2, ahbregaddr) & (1<<MC_INIT_COMPLETE_OFFSET)) == 0) {}
+
+  // Disable the BusBlocker in front of the controller AXI slave ports
+  volatile uint64_t *filterreg = (volatile uint64_t *)filteraddr;
+  filterreg[0] = 0x0f00000000000000UL | (ddrend >> 2);
+  //                ^^ RWX + TOR
+}
+
+static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t ahbregaddr) {
+  // Mask off Bit 8 of Interrupt Status
+  // Bit [8] The MC initialization has been completed
+  _REG32(136<<2, ahbregaddr) |= (1<<MC_INIT_COMPLETE_OFFSET);
+}
+
+static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) {
+  // Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status
+  // Bit [2] Multiple accesses outside the defined PHYSICAL memory space have occured
+  // Bit [1] A memory access outside the defined PHYSICAL memory space has occured
+  _REG32(136<<2, ahbregaddr) |= ((1<<OUT_OF_RANGE_OFFSET) | (1<<MULTIPLE_OUT_OF_RANGE_OFFSET));
+}
+
+static inline void ux00ddr_mask_port_command_error_interrupt(size_t ahbregaddr) {
+  // Mask off Bit 7 of Interrupt Status
+  // Bit [7] An error occured on the port command channel
+  _REG32(136<<2, ahbregaddr) |= (1<<PORT_COMMAND_CHANNEL_ERROR_OFFSET);
+}
+
+static inline void ux00ddr_mask_leveling_completed_interrupt(size_t ahbregaddr) {
+  // Mask off Bit 22 of Interrupt Status
+  // Bit [22] The leveling operation has completed
+  _REG32(136<<2, ahbregaddr) |= (1<<LEVELING_OPERATION_COMPLETED_OFFSET);
+}
+
+static inline void ux00ddr_setuprangeprotection(size_t ahbregaddr, size_t end_addr) {
+  _REG32(209<<2, ahbregaddr) = 0x0;
+  size_t end_addr_16Kblocks = ((end_addr >> 14) & 0x7FFFFF)-1;
+  _REG32(210<<2, ahbregaddr) = ((uint32_t) end_addr_16Kblocks);
+  _REG32(212<<2, ahbregaddr) = 0x0;
+  _REG32(214<<2, ahbregaddr) = 0x0;
+  _REG32(216<<2, ahbregaddr) = 0x0;
+  _REG32(224<<2, ahbregaddr) |= (0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET);
+  _REG32(225<<2, ahbregaddr) = 0xFFFFFFFF;
+  _REG32(208<<2, ahbregaddr) |= (1 << AXI0_ADDRESS_RANGE_ENABLE);
+  _REG32(208<<2, ahbregaddr) |= (1 << PORT_ADDR_PROTECTION_EN_OFFSET);
+
+}
+
+static inline void ux00ddr_disableaxireadinterleave(size_t ahbregaddr) {
+  _REG32(120<<2, ahbregaddr) |= (1<<DISABLE_RD_INTERLEAVE_OFFSET);
+}
+
+static inline void ux00ddr_disableoptimalrmodw(size_t ahbregaddr) {
+  _REG32(21<<2, ahbregaddr) &= (~(1<<OPTIMAL_RMODW_EN_OFFSET));
+}
+
+static inline void ux00ddr_enablewriteleveling(size_t ahbregaddr) {
+  _REG32(170<<2, ahbregaddr) |= ((1<<WRLVL_EN_OFFSET) | (1<<DFI_PHY_WRLELV_MODE_OFFSET));
+}
+
+static inline void ux00ddr_enablereadleveling(size_t ahbregaddr) {
+  _REG32(181<<2, ahbregaddr) |= (1<<DFI_PHY_RDLVL_MODE_OFFSET);
+  _REG32(260<<2, ahbregaddr) |= (1<<RDLVL_EN_OFFSET);
+}
+
+static inline void ux00ddr_enablereadlevelinggate(size_t ahbregaddr) {
+  _REG32(260<<2, ahbregaddr) |= (1<<RDLVL_GATE_EN_OFFSET);
+  _REG32(182<<2, ahbregaddr) |= (1<<DFI_PHY_RDLVL_GATE_MODE_OFFSET);
+}
+
+static inline void ux00ddr_enablevreftraining(size_t ahbregaddr) {
+  _REG32(184<<2, ahbregaddr) |= (1<<VREF_EN_OFFSET);
+}
+
+static inline uint32_t ux00ddr_getdramclass(size_t ahbregaddr) {
+  return ((_REG32(0, ahbregaddr) >> DRAM_CLASS_OFFSET) & 0xF);
+}
+
+static inline uint64_t ux00ddr_phy_fixup(size_t ahbregaddr) {
+  // return bitmask of failed lanes
+
+  size_t ddrphyreg = ahbregaddr + 0x2000;
+
+  uint64_t fails=0;
+  uint32_t slicebase = 0;
+  uint32_t dq = 0;
+
+  // check errata condition
+  for (uint32_t slice = 0; slice < 8; slice++) {
+    uint32_t regbase = slicebase + 34;
+    for (uint32_t reg = 0 ; reg < 4; reg++) {
+      uint32_t updownreg = _REG32((regbase+reg)<<2, ddrphyreg);
+      for (uint32_t bit = 0; bit < 2; bit++) {
+        uint32_t phy_rx_cal_dqn_0_offset;
+
+        if (bit==0) {
+          phy_rx_cal_dqn_0_offset = PHY_RX_CAL_DQ0_0_OFFSET;
+        }else{
+          phy_rx_cal_dqn_0_offset = PHY_RX_CAL_DQ1_0_OFFSET;
+        }
+
+        uint32_t down = (updownreg >> phy_rx_cal_dqn_0_offset) & 0x3F;
+        uint32_t up = (updownreg >> (phy_rx_cal_dqn_0_offset+6)) & 0x3F;
+
+        uint8_t failc0 = ((down == 0) && (up == 0x3F));
+        uint8_t failc1 = ((up == 0) && (down == 0x3F));
+
+        // print error message on failure
+        if (failc0 || failc1) {
+          //if (fails==0) uart_puts((void*) UART0_CTRL_ADDR, "DDR error in fixing up \n");
+          fails |= (1<<dq);
+          char slicelsc = '0';
+          char slicemsc = '0';
+          slicelsc += (dq % 10);
+          slicemsc += (dq / 10);
+          //uart_puts((void*) UART0_CTRL_ADDR, "S ");
+          //uart_puts((void*) UART0_CTRL_ADDR, &slicemsc);
+          //uart_puts((void*) UART0_CTRL_ADDR, &slicelsc);
+          //if (failc0) uart_puts((void*) UART0_CTRL_ADDR, "U");
+          //else uart_puts((void*) UART0_CTRL_ADDR, "D");
+          //uart_puts((void*) UART0_CTRL_ADDR, "\n");
+        }
+        dq++;
+      }
+    }
+    slicebase+=128;
+  }
+  return (0);
+}
+
+#endif
+
+#endif
-- 
cgit v1.2.3