From dda0e66d9c0d834acb5cda6dc85c273eeaecd48a Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Wed, 6 Nov 2013 11:21:48 -0800 Subject: Exynos5420: Fix up the i2c driver for use with the TPM driver The TPM driver expects to call i2c_read with zero address length. The i2c driver wasn't prepared to handle that particularly in the case of reads because it expected to send an address before switching over to read mode for the data. This change also fixes up the read and write calls to consistently be read32 and write32 instead of readl and writel. Change-Id: I33dee89b83d4cd9d3e1b90e84b40e761bb8d4de4 Signed-off-by: Gabe Black Reviewed-on: https://chromium-review.googlesource.com/175966 Reviewed-by: Stefan Reinauer Tested-by: Stefan Reinauer Commit-Queue: Gabe Black (cherry picked from commit cf686269424ea938d6f953d0f76103182eb71297) Signed-off-by: Isaac Christensen Reviewed-on: http://review.coreboot.org/6857 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/soc/samsung/exynos5420/i2c.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'src/soc/samsung/exynos5420') diff --git a/src/soc/samsung/exynos5420/i2c.c b/src/soc/samsung/exynos5420/i2c.c index 226862802a..6ca0087e5b 100644 --- a/src/soc/samsung/exynos5420/i2c.c +++ b/src/soc/samsung/exynos5420/i2c.c @@ -210,7 +210,7 @@ static int WaitForXfer(struct s3c24x0_i2c *i2c) static void ReadWriteByte(struct s3c24x0_i2c *i2c) { - writel(read32(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); + write32(read32(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } static void i2c_ch_init(struct s3c24x0_i2c_bus *bus, int speed, int slaveadd) @@ -318,7 +318,7 @@ static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus, write32(HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN, &hsregs->usi_fifo_ctl); /* i2c_conf configure */ - write32(readl(&hsregs->usi_conf) | HSI2C_AUTO_MODE, &hsregs->usi_conf); + write32(read32(&hsregs->usi_conf) | HSI2C_AUTO_MODE, &hsregs->usi_conf); } /* SW reset for the high speed bus */ @@ -484,17 +484,19 @@ static int hsi2c_read(struct exynos5_hsi2c *i2c, /* chip address */ write32(HSI2C_SLV_ADDR_MAS(chip), &i2c->i2c_addr); - /* usi_ctl enable i2c func, master write configure */ - write32((HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER), - &i2c->usi_ctl); + if (alen) { + /* usi_ctl enable i2c func, master write configure */ + write32(HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER, + &i2c->usi_ctl); - /* auto_conf */ - write32(alen | HSI2C_MASTER_RUN | HSI2C_STOP_AFTER_TRANS, - &i2c->usi_auto_conf); + /* auto_conf */ + write32(alen | HSI2C_MASTER_RUN | HSI2C_STOP_AFTER_TRANS, + &i2c->usi_auto_conf); - if (hsi2c_senddata(i2c, addr, alen) || - hsi2c_wait_for_transfer(i2c) != 1) { - return -1; + if (hsi2c_senddata(i2c, addr, alen) || + hsi2c_wait_for_transfer(i2c) != 1) { + return -1; + } } /* usi_ctl enable i2c func, master WRITE configure */ @@ -542,7 +544,7 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c, timer_monotonic_get(¤t); end = current; mono_time_add_usecs(&end, I2C_TIMEOUT_MS * 1000); - while (readl(&i2c->iicstat) & I2CSTAT_BSY) { + while (read32(&i2c->iicstat) & I2CSTAT_BSY) { if (!mono_time_before(¤t, &end)){ printk(BIOS_ERR, "%s timed out\n", __func__); return I2C_NOK_TOUT; @@ -607,7 +609,7 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c, while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - write32(readl(&i2c->iiccon) + write32(read32(&i2c->iiccon) & ~I2CCON_ACKGEN, &i2c->iiccon); ReadWriteByte(i2c); -- cgit v1.2.3