From 737a7cc9f13e6c2939d7fd80716e33a729fc3ca5 Mon Sep 17 00:00:00 2001 From: Liangfeng Wu Date: Thu, 15 Sep 2016 17:16:54 +0800 Subject: rockchip/rk3399: Configure USB3 controller to work in USB2 only mode In USB2 only mode, the Type-C PHY will be held in reset and only the USB2 logic of the USB3 OTG controller and PHY will be used over the USB2 pins on the Type-C connector to support Low, Full and High-speed USB operation. BRANCH=none BUG=chrome-os-partner:56425 TEST=Go to recovery mode, plug a Type-C USB drive containing chrome OS image into both ports in all orientations, check if system can boot from USB. Change-Id: Ic265c0c91c24f63b2f9c3106eb2bb277a589233b Signed-off-by: Patrick Georgi Original-Commit-Id: a37ccc5b6019967483eac6b5a360d67bc3326e93 Original-Change-Id: I582f04f84eef447ff0ba691ce60e9461ed31cfad Original-Signed-off-by: Liangfeng Wu Original-Reviewed-on: https://chromium-review.googlesource.com/385837 Original-Commit-Ready: Julius Werner Original-Tested-by: Julius Werner Original-Reviewed-by: Julius Werner Reviewed-on: https://review.coreboot.org/16717 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/soc/rockchip/rk3399/usb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'src/soc/rockchip') diff --git a/src/soc/rockchip/rk3399/usb.c b/src/soc/rockchip/rk3399/usb.c index f638a1ece2..4c731bdf17 100644 --- a/src/soc/rockchip/rk3399/usb.c +++ b/src/soc/rockchip/rk3399/usb.c @@ -17,6 +17,9 @@ #include #include #include +#include +#include +#include #include /* SuperSpeed over Type-C is hard. We don't care about speed in firmware: just @@ -86,12 +89,24 @@ static void setup_dwc3(struct rockchip_usb_dwc3 *dwc3) void reset_usb_otg0(void) { + /* Keep whole USB OTG0 controller in reset, then + * configure controller to work in USB 2.0 only mode. */ + write32(&cru_ptr->softrst_con[18], RK_SETBITS(1 << 5)); + write32(&rk3399_grf->usb3otg0_con1, RK_CLRSETBITS(0xf << 12, 1 << 0)); + write32(&cru_ptr->softrst_con[18], RK_CLRBITS(1 << 5)); + printk(BIOS_DEBUG, "Starting DWC3 reset for USB OTG0\n"); reset_dwc3(rockchip_usb_otg0_dwc3); } void reset_usb_otg1(void) { + /* Keep whole USB OTG1 controller in reset, then + * configure controller to work in USB 2.0 only mode. */ + write32(&cru_ptr->softrst_con[18], RK_SETBITS(1 << 6)); + write32(&rk3399_grf->usb3otg1_con1, RK_CLRSETBITS(0xf << 12, 1 << 0)); + write32(&cru_ptr->softrst_con[18], RK_CLRBITS(1 << 6)); + printk(BIOS_DEBUG, "Starting DWC3 reset for USB OTG1\n"); reset_dwc3(rockchip_usb_otg1_dwc3); } -- cgit v1.2.3