From 58ed173a2c8c42bf9d074e026ecedad14ef42f90 Mon Sep 17 00:00:00 2001 From: Prudhvi Yarlagadda Date: Mon, 15 Apr 2019 21:32:12 +0530 Subject: qcom: Add i2c driver Add i2c driver in coreboot. Change-Id: I3d39d0325718fc5dd60da42eb2b87dcc4429bfc2 Signed-off-by: Prudhvi Yarlagadda Signed-off-by: Nitheesh Sekar Reviewed-on: https://review.coreboot.org/c/coreboot/+/32546 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/soc/qualcomm/qcs405/Makefile.inc | 12 + src/soc/qualcomm/qcs405/blsp.c | 65 ++++ src/soc/qualcomm/qcs405/i2c.c | 181 +++++++++++ src/soc/qualcomm/qcs405/qup.c | 609 +++++++++++++++++++++++++++++++++++ 4 files changed, 867 insertions(+) create mode 100644 src/soc/qualcomm/qcs405/blsp.c create mode 100644 src/soc/qualcomm/qcs405/i2c.c create mode 100644 src/soc/qualcomm/qcs405/qup.c (limited to 'src/soc/qualcomm/qcs405') diff --git a/src/soc/qualcomm/qcs405/Makefile.inc b/src/soc/qualcomm/qcs405/Makefile.inc index c64e5bcf58..0ebfcaef78 100644 --- a/src/soc/qualcomm/qcs405/Makefile.inc +++ b/src/soc/qualcomm/qcs405/Makefile.inc @@ -8,6 +8,9 @@ bootblock-y += spi.c bootblock-y += mmu.c bootblock-y += gpio.c bootblock-y += clock.c +bootblock-y += i2c.c +bootblock-y += qup.c +bootblock-y += blsp.c bootblock-$(CONFIG_DRIVERS_UART) += uart.c ################################################################################ @@ -15,6 +18,9 @@ verstage-y += timer.c verstage-y += spi.c verstage-y += gpio.c verstage-y += clock.c +verstage-y += i2c.c +verstage-y += qup.c +verstage-y += blsp.c verstage-$(CONFIG_DRIVERS_UART) += uart.c ################################################################################ @@ -25,6 +31,9 @@ romstage-y += gpio.c romstage-y += clock.c romstage-y += usb.c romstage-$(CONFIG_DRIVERS_UART) += uart.c +romstage-y += i2c.c +romstage-y += qup.c +romstage-y += blsp.c ################################################################################ ramstage-y += soc.c @@ -33,6 +42,9 @@ ramstage-y += spi.c ramstage-y += cbmem.c ramstage-y += gpio.c ramstage-y += clock.c +ramstage-y += i2c.c +ramstage-y += qup.c +ramstage-y += blsp.c ramstage-y += usb.c ramstage-$(CONFIG_DRIVERS_UART) += uart.c diff --git a/src/soc/qualcomm/qcs405/blsp.c b/src/soc/qualcomm/qcs405/blsp.c new file mode 100644 index 0000000000..f185ea388a --- /dev/null +++ b/src/soc/qualcomm/qcs405/blsp.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 - 2016, 2019 The Linux Foundation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of The Linux Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include + +blsp_return_t blsp_i2c_init(blsp_qup_id_t id) +{ + void *base; + + switch (id) { + case BLSP_QUP_ID_1: + gpio_configure + (GPIO(24), 2, GPIO_PULL_UP, GPIO_2MA, GPIO_OUTPUT); + gpio_configure + (GPIO(25), 2, GPIO_PULL_UP, GPIO_2MA, GPIO_OUTPUT); + break; + default: + return BLSP_ID_ERROR; + } + + clock_configure_i2c(19200000); + clock_enable_i2c(); + + base = blsp_qup_base(id); + + if (!base) + return BLSP_ID_ERROR; + + /* Configure Mini core to I2C core */ + clrsetbits_le32(base, BLSP_MINI_CORE_MASK, BLSP_MINI_CORE_I2C); + + return BLSP_SUCCESS; +} diff --git a/src/soc/qualcomm/qcs405/i2c.c b/src/soc/qualcomm/qcs405/i2c.c new file mode 100644 index 0000000000..94f8e0d4bb --- /dev/null +++ b/src/soc/qualcomm/qcs405/i2c.c @@ -0,0 +1,181 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 - 2015, 2019 The Linux Foundation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of The Linux Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static qup_config_t blsp1_qup0_config = { + QUP_MINICORE_I2C_MASTER, + 400000, + 19200000, + QUP_MODE_BLOCK, + 0 +}; + +static qup_config_t blsp1_qup1_config = { + QUP_MINICORE_I2C_MASTER, + 400000, + 19200000, + QUP_MODE_BLOCK, + 0 +}; + +static qup_config_t blsp1_qup2_config = { + QUP_MINICORE_I2C_MASTER, + 400000, + 19200000, + QUP_MODE_BLOCK, + 0 +}; + +static qup_config_t blsp1_qup3_config = { + QUP_MINICORE_I2C_MASTER, + 400000, + 19200000, + QUP_MODE_BLOCK, + 0 +}; + +static int i2c_read(uint32_t gsbi_id, uint8_t slave, + uint8_t *data, int data_len) +{ + qup_data_t obj; + qup_return_t qup_ret = 0; + + memset(&obj, 0, sizeof(obj)); + obj.protocol = QUP_MINICORE_I2C_MASTER; + obj.p.iic.addr = slave; + obj.p.iic.data_len = data_len; + obj.p.iic.data = data; + qup_ret = qup_recv_data(gsbi_id, &obj); + + if (qup_ret != QUP_SUCCESS) + return 1; + else + return 0; +} + +static int i2c_write(uint32_t gsbi_id, uint8_t slave, + uint8_t *data, int data_len, uint8_t stop_seq) +{ + qup_data_t obj; + qup_return_t qup_ret = 0; + + memset(&obj, 0, sizeof(obj)); + obj.protocol = QUP_MINICORE_I2C_MASTER; + obj.p.iic.addr = slave; + obj.p.iic.data_len = data_len; + obj.p.iic.data = data; + qup_ret = qup_send_data(gsbi_id, &obj, stop_seq); + + if (qup_ret != QUP_SUCCESS) + return 1; + else + return 0; +} + +static int i2c_init(blsp_qup_id_t id) +{ + qup_config_t *qup_config; + + switch (id) { + case BLSP_QUP_ID_0: + qup_config = &blsp1_qup0_config; + break; + case BLSP_QUP_ID_1: + qup_config = &blsp1_qup1_config; + break; + case BLSP_QUP_ID_2: + qup_config = &blsp1_qup2_config; + break; + case BLSP_QUP_ID_3: + qup_config = &blsp1_qup3_config; + break; + default: + printk(BIOS_ERR, "QUP configuration not defined for BLSP%d.\n", + id); + return 1; + } + + if (qup_config->initialized) + return 0; + + if (blsp_i2c_init(id)) { + printk(BIOS_ERR, "failed to initialize blsp\n"); + return 1; + } + + if (qup_init(id, qup_config)) { + printk(BIOS_ERR, "failed to initialize qup\n"); + return 1; + } + + if (qup_reset_i2c_master_status(id)) { + printk(BIOS_ERR, "failed to reset i2c master status\n"); + return 1; + } + + qup_config->initialized = 1; + return 0; +} + +int platform_i2c_transfer(unsigned int bus, struct i2c_msg *segments, + int seg_count) +{ + struct i2c_msg *seg = segments; + int ret = 0; + + if (i2c_init(bus)) + return 1; + + while (!ret && seg_count--) { + if (seg->flags & I2C_M_RD) + ret = i2c_read(bus, seg->slave, seg->buf, seg->len); + else + ret = i2c_write(bus, seg->slave, seg->buf, seg->len, + (seg_count ? 0 : 1)); + seg++; + } + + if (ret) { + qup_set_state(bus, QUP_STATE_RESET); + return 1; + } + + return 0; +} diff --git a/src/soc/qualcomm/qcs405/qup.c b/src/soc/qualcomm/qcs405/qup.c new file mode 100644 index 0000000000..cff5241480 --- /dev/null +++ b/src/soc/qualcomm/qcs405/qup.c @@ -0,0 +1,609 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 - 2015, 2019 The Linux Foundation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of The Linux Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define TIMEOUT_CNT 100 + +#define QUP_ADDR(id, reg) (blsp_qup_base(id) + (reg)) + +#define QUP_DEBUG 0 + +#define QUPDBG BIOS_ERR, "\t-> " + +#if QUP_DEBUG +#define qup_write32(a, v) do { \ + write32(a, v); \ + printk(QUPDBG "%s(%d): write32(0x%p, 0x%x)\n", \ + __func__, __LINE__, a, v); \ +} while (0) +#else +#define qup_write32 write32 +#endif + +struct i2c_clk_div_fld { + u32 clk_freq_out; + u8 fs_div; + u8 ht_div; +}; + +static struct i2c_clk_div_fld i2c_clk_div_map[] = { + {100000, 124, 62}, + {400000, 28, 14}, + {1000000, 8, 5}, +}; + +static void i2c_set_mstr_clk_ctl(unsigned int id, unsigned int hz) +{ + int i; + struct i2c_clk_div_fld *itr = i2c_clk_div_map; + u8 fs_div = 0; + u8 ht_div = 0; + u32 mstr_clk_ctl; + + for (i = 0; i < ARRAY_SIZE(i2c_clk_div_map); ++i, ++itr) { + if (hz == itr->clk_freq_out) { + if (!fs_div) + fs_div = itr->fs_div; + if (!ht_div) + ht_div = itr->ht_div; + break; + } + } + + /* format values in clk-ctl cache */ + mstr_clk_ctl = ((ht_div & 0xff) << 16) | (fs_div & 0xff); + qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_CLK_CTL), mstr_clk_ctl); +} + + +static qup_return_t qup_i2c_master_status(blsp_qup_id_t id) +{ + uint32_t reg_val = read32(QUP_ADDR(id, QUP_I2C_MASTER_STATUS)); + + if (read32(QUP_ADDR(id, QUP_ERROR_FLAGS))) + return QUP_ERR_XFER_FAIL; + +#if QUP_DEBUG + printk(QUPDBG "%s: 0x%x\n", __func__, reg_val); +#endif + + if (reg_val & QUP_I2C_INVALID_READ_ADDR) + return QUP_ERR_I2C_INVALID_SLAVE_ADDR; + if (reg_val & QUP_I2C_FAILED_MASK) + return QUP_ERR_I2C_FAILED; + if (reg_val & QUP_I2C_ARB_LOST) + return QUP_ERR_I2C_ARB_LOST; + if (reg_val & QUP_I2C_BUS_ERROR) + return QUP_ERR_I2C_BUS_ERROR; + if (reg_val & QUP_I2C_INVALID_WRITE) + return QUP_ERR_I2C_INVALID_WRITE; + if (reg_val & QUP_I2C_PACKET_NACK) + return QUP_ERR_I2C_NACK; + if (reg_val & QUP_I2C_INVALID_TAG) + return QUP_ERR_I2C_INVALID_TAG; + + return QUP_SUCCESS; +} + +static int check_bit_state(uint32_t *reg, int wait_for) +{ + unsigned int count = TIMEOUT_CNT; + + while ((read32(reg) & (QUP_STATE_VALID_MASK | QUP_STATE_MASK)) != + (QUP_STATE_VALID | wait_for)) { + if (count == 0) + return QUP_ERR_TIMEOUT; + count--; + } + + return QUP_SUCCESS; +} + +/* + * Check whether GSBIn_QUP State is valid + */ +static qup_return_t qup_wait_for_state(blsp_qup_id_t id, unsigned int wait_for) +{ + return check_bit_state(QUP_ADDR(id, QUP_STATE), wait_for); +} + +qup_return_t qup_reset_i2c_master_status(blsp_qup_id_t id) +{ + /* + * The I2C_STATUS is a status register. + * Writing any value clears the status bits. + */ + qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_STATUS), 0); + return QUP_SUCCESS; +} + +static qup_return_t qup_reset_master_status(blsp_qup_id_t id) +{ + qup_write32(QUP_ADDR(id, QUP_ERROR_FLAGS), 0x3C); + qup_write32(QUP_ADDR(id, QUP_ERROR_FLAGS_EN), 0x3C); + qup_reset_i2c_master_status(id); + return QUP_SUCCESS; +} + +static qup_return_t qup_fifo_wait_for(blsp_qup_id_t id, uint32_t status) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + unsigned int count = TIMEOUT_CNT; + + while (!(read32(QUP_ADDR(id, QUP_OPERATIONAL)) & status)) { + ret = qup_i2c_master_status(id); + if (ret) + return ret; + if (count == 0) + return QUP_ERR_TIMEOUT; + count--; + } + + return QUP_SUCCESS; +} + +static qup_return_t qup_fifo_wait_while(blsp_qup_id_t id, uint32_t status) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + unsigned int count = TIMEOUT_CNT; + + while (read32(QUP_ADDR(id, QUP_OPERATIONAL)) & status) { + ret = qup_i2c_master_status(id); + if (ret) + return ret; + if (count == 0) + return QUP_ERR_TIMEOUT; + count--; + } + + return QUP_SUCCESS; +} + +static inline uint32_t qup_i2c_create_output_tag(int stop, u8 data) +{ + uint32_t tag; + + if (stop) + tag = QUP_I2C_STOP_SEQ | QUP_I2C_DATA(data); + else + tag = QUP_I2C_DATA_SEQ | QUP_I2C_DATA(data); + + return tag; +} + +static inline qup_return_t qup_i2c_write_fifo_flush(blsp_qup_id_t id) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + + qup_write32(QUP_ADDR(id, QUP_OPERATIONAL), OUTPUT_SERVICE_FLAG); + + mdelay(4); /* TPM seems to need this */ + + ret = qup_fifo_wait_while(id, OUTPUT_FIFO_NOT_EMPTY); + if (ret) + return ret; + + ret = qup_i2c_master_status(id); + + if (ret) + printk(BIOS_DEBUG, "%s: error\n", __func__); + + return ret; +} + +static qup_return_t qup_i2c_write_fifo(blsp_qup_id_t id, qup_data_t *p_tx_obj, + uint8_t stop_seq) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + uint8_t addr = p_tx_obj->p.iic.addr; + uint8_t *data_ptr = p_tx_obj->p.iic.data; + unsigned int data_len = p_tx_obj->p.iic.data_len; + unsigned int idx = 0; + uint32_t tag, *fifo = QUP_ADDR(id, QUP_OUTPUT_FIFO); + + qup_reset_master_status(id); + + qup_write32(QUP_ADDR(id, QUP_MX_OUTPUT_COUNT), data_len + 1); + + qup_set_state(id, QUP_STATE_RUN); + + /* + * Since UNPACK enable is set in io mode register, populate 2 tags + * for each fifo register. + * + * Create the first tag as follows, with the start tag and first byte + * of the data to be written + * +--------+--------+--------+--------+ + * | STOP / | data | START | ADDR | + * |DATA tag| byte | tag | << 1 | + * +--------+--------+--------+--------+ + * rest will be created in the following while loop. + */ + tag = qup_i2c_create_output_tag(data_len == 1 && stop_seq, + data_ptr[idx]); + tag = ((tag << 16) & 0xffff0000) | + (QUP_I2C_START_SEQ | QUP_I2C_ADDR(addr)); + data_len--; + idx++; + + qup_write32(fifo, tag); + + while (data_len) { + + tag = qup_i2c_create_output_tag(data_len == 1 && stop_seq, + data_ptr[idx]); + data_len--; + idx++; + + if (data_len) { + tag |= qup_i2c_create_output_tag( + data_len == 1 && stop_seq, + data_ptr[idx]) << 16; + data_len--; + idx++; + } + + qup_write32(fifo, tag); + + ret = qup_i2c_write_fifo_flush(id); + + if (ret) { + printk(QUPDBG "%s: error\n", __func__); + return ret; + } + } + + ret = qup_i2c_write_fifo_flush(id); + + qup_set_state(id, QUP_STATE_RESET); + + return ret; +} + +static qup_return_t qup_i2c_write(blsp_qup_id_t id, uint8_t mode, + qup_data_t *p_tx_obj, uint8_t stop_seq) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + + switch (mode) { + case QUP_MODE_FIFO: + case QUP_MODE_BLOCK: + ret = qup_i2c_write_fifo(id, p_tx_obj, stop_seq); + break; + default: + ret = QUP_ERR_UNSUPPORTED; + } + + if (ret) { + qup_set_state(id, QUP_STATE_RESET); + printk(QUPDBG "%s() failed (%d)\n", __func__, ret); + } + + return ret; +} + +static int qup_i2c_parse_tag(uint32_t data, uint8_t *data_ptr, uint32_t len) +{ + int i, idx = 0; + int max = (len > 2) ? 2 : len; + + for (i = 0; i < max; i++) { + switch (QUP_I2C_MI_TAG(data)) { + case QUP_I2C_MIDATA_SEQ: + data_ptr[idx] = QUP_I2C_DATA(data); + idx++; + break; + case QUP_I2C_MISTOP_SEQ: + data_ptr[idx] = QUP_I2C_DATA(data); + idx++; + return idx; + default: + printk(QUPDBG "%s: Unexpected tag (0x%x)\n", __func__, + QUP_I2C_MI_TAG(data)); + return -1; + } + + data = (data >> 16); + } + + return idx; +} + +static qup_return_t qup_i2c_read_fifo(blsp_qup_id_t id, qup_data_t *p_tx_obj) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + uint8_t addr = p_tx_obj->p.iic.addr; + uint8_t *data_ptr = p_tx_obj->p.iic.data; + unsigned int data_len = p_tx_obj->p.iic.data_len; + unsigned int idx = 0; + uint32_t *fifo = QUP_ADDR(id, QUP_OUTPUT_FIFO); + + qup_reset_master_status(id); + + qup_write32(QUP_ADDR(id, QUP_IO_MODES), + QUP_UNPACK_EN | QUP_PACK_EN | + ((QUP_MODE_BLOCK & QUP_MODE_MASK) << + QUP_OUTPUT_MODE_SHFT) | + ((QUP_MODE_BLOCK & QUP_MODE_MASK) << + QUP_INPUT_MODE_SHFT)); + + qup_write32(QUP_ADDR(id, QUP_MX_INPUT_COUNT), data_len); + + qup_set_state(id, QUP_STATE_RUN); + + qup_write32(fifo, (QUP_I2C_START_SEQ | + (QUP_I2C_ADDR(addr) | QUP_I2C_SLAVE_READ)) | + ((QUP_I2C_RECV_SEQ | data_len) << 16)); + + ret = qup_i2c_write_fifo_flush(id); + if (ret) { + printk(QUPDBG "%s: OUTPUT_FIFO_NOT_EMPTY\n", __func__); + return ret; + } + + ret = qup_fifo_wait_for(id, INPUT_SERVICE_FLAG); + if (ret) { + printk(QUPDBG "%s: INPUT_SERVICE_FLAG\n", __func__); + return ret; + } + + fifo = QUP_ADDR(id, QUP_INPUT_FIFO); + + while (data_len) { + uint32_t data; + int count; + + data = read32(fifo); + mdelay(1); + + count = qup_i2c_parse_tag(data, data_ptr + idx, data_len); + + if (count < 0) { + printk(QUPDBG "%s: Cannot parse tag 0x%x\n", + __func__, data); + qup_set_state(id, QUP_STATE_PAUSE); + + return QUP_ERR_I2C_INVALID_TAG; + } + + idx += count; + data_len -= count; + + qup_write32(QUP_ADDR(id, QUP_OPERATIONAL), INPUT_SERVICE_FLAG); + } + + p_tx_obj->p.iic.data_len = idx; + + qup_write32(QUP_ADDR(id, QUP_MX_READ_COUNT), 0); + + qup_set_state(id, QUP_STATE_RESET); + + return QUP_SUCCESS; +} + +static qup_return_t qup_i2c_read(blsp_qup_id_t id, uint8_t mode, + qup_data_t *p_tx_obj) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + + qup_set_state(id, QUP_STATE_RESET); + + switch (mode) { + case QUP_MODE_FIFO: + case QUP_MODE_BLOCK: + ret = qup_i2c_read_fifo(id, p_tx_obj); + break; + default: + ret = QUP_ERR_UNSUPPORTED; + } + + if (ret) { + qup_set_state(id, QUP_STATE_RESET); + printk(QUPDBG "%s() failed (%d)\n", __func__, ret); + } + + return ret; +} + +qup_return_t qup_init(blsp_qup_id_t id, const qup_config_t *config_ptr) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + uint32_t reg_val; + + /* Reset the QUP core.*/ + qup_write32(QUP_ADDR(id, QUP_SW_RESET), 0x1); + + /* Wait till the reset takes effect */ + ret = qup_wait_for_state(id, QUP_STATE_RESET); + if (ret) + goto bailout; + + /* Reset the config */ + qup_write32(QUP_ADDR(id, QUP_CONFIG), 0); + + /* Program the config register */ + /* Set N value */ + reg_val = 0x0F; + /* Set protocol */ + switch (config_ptr->protocol) { + case QUP_MINICORE_I2C_MASTER: + reg_val |= ((config_ptr->protocol & + QUP_MINI_CORE_PROTO_MASK) << + QUP_MINI_CORE_PROTO_SHFT); + break; + default: + ret = QUP_ERR_UNSUPPORTED; + goto bailout; + } + reg_val |= QUP_APP_CLK_ON_EN | QUP_CORE_CLK_ON_EN; + qup_write32(QUP_ADDR(id, QUP_CONFIG), reg_val); + + /* Choose version 1 tag */ + qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_CONFIG), 0); + + /* Reset i2c clk cntl register */ + qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_CLK_CTL), 0); + + /* Set QUP IO Mode */ + switch (config_ptr->mode) { + case QUP_MODE_FIFO: + case QUP_MODE_BLOCK: + reg_val = QUP_UNPACK_EN | QUP_PACK_EN | + ((config_ptr->mode & QUP_MODE_MASK) << + QUP_OUTPUT_MODE_SHFT) | + ((config_ptr->mode & QUP_MODE_MASK) << + QUP_INPUT_MODE_SHFT); + break; + default: + ret = QUP_ERR_UNSUPPORTED; + goto bailout; + } + qup_write32(QUP_ADDR(id, QUP_IO_MODES), reg_val); + + /*Set i2c clk cntl*/ + i2c_set_mstr_clk_ctl(id, 400000); + + qup_set_state(id, QUP_STATE_RESET); +bailout: + if (ret) + printk(QUPDBG "failed to init qup (%d)\n", ret); + + return ret; +} + +qup_return_t qup_set_state(blsp_qup_id_t id, uint32_t state) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + unsigned int curr_state = read32(QUP_ADDR(id, QUP_STATE)); + + if ((state <= QUP_STATE_PAUSE) + && (curr_state & QUP_STATE_VALID_MASK)) { + /* + * For PAUSE_STATE to RESET_STATE transition, + * two writes of 10[binary]) are required for the + * transition to complete. + */ + if (curr_state == QUP_STATE_PAUSE && state == QUP_STATE_RESET) { + qup_write32(QUP_ADDR(id, QUP_STATE), 0x2); + qup_write32(QUP_ADDR(id, QUP_STATE), 0x2); + } else { + qup_write32(QUP_ADDR(id, QUP_STATE), state); + } + ret = qup_wait_for_state(id, state); + } + + return ret; +} + +static qup_return_t qup_i2c_send_data(blsp_qup_id_t id, qup_data_t *p_tx_obj, + uint8_t stop_seq) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + uint8_t mode = (read32(QUP_ADDR(id, QUP_IO_MODES)) >> + QUP_OUTPUT_MODE_SHFT) & QUP_MODE_MASK; + + ret = qup_i2c_write(id, mode, p_tx_obj, stop_seq); + if (QUP_DEBUG) { + int i; + + printk(BIOS_DEBUG, "i2c tx bus %d device %2.2x:", + id, p_tx_obj->p.iic.addr); + for (i = 0; i < p_tx_obj->p.iic.data_len; i++) + printk(BIOS_DEBUG, " %2.2x", p_tx_obj->p.iic.data[i]); + printk(BIOS_DEBUG, "\n"); + } + + return ret; +} + +qup_return_t qup_send_data(blsp_qup_id_t id, qup_data_t *p_tx_obj, + uint8_t stop_seq) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + + if (p_tx_obj->protocol == ((read32(QUP_ADDR(id, QUP_CONFIG)) >> + QUP_MINI_CORE_PROTO_SHFT) & QUP_MINI_CORE_PROTO_MASK)) { + switch (p_tx_obj->protocol) { + case QUP_MINICORE_I2C_MASTER: + ret = qup_i2c_send_data(id, p_tx_obj, stop_seq); + break; + default: + ret = QUP_ERR_UNSUPPORTED; + } + } + + return ret; +} + +static qup_return_t qup_i2c_recv_data(blsp_qup_id_t id, qup_data_t *p_rx_obj) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + uint8_t mode = (read32(QUP_ADDR(id, QUP_IO_MODES)) >> + QUP_INPUT_MODE_SHFT) & QUP_MODE_MASK; + + ret = qup_i2c_read(id, mode, p_rx_obj); + if (QUP_DEBUG) { + int i; + + printk(BIOS_DEBUG, "i2c rxed on bus %d device %2.2x:", + id, p_rx_obj->p.iic.addr); + for (i = 0; i < p_rx_obj->p.iic.data_len; i++) + printk(BIOS_DEBUG, " %2.2x", p_rx_obj->p.iic.data[i]); + printk(BIOS_DEBUG, "\n"); + } + + return ret; +} + +qup_return_t qup_recv_data(blsp_qup_id_t id, qup_data_t *p_rx_obj) +{ + qup_return_t ret = QUP_ERR_UNDEFINED; + + if (p_rx_obj->protocol == ((read32(QUP_ADDR(id, QUP_CONFIG)) >> + QUP_MINI_CORE_PROTO_SHFT) & QUP_MINI_CORE_PROTO_MASK)) { + switch (p_rx_obj->protocol) { + case QUP_MINICORE_I2C_MASTER: + ret = qup_i2c_recv_data(id, p_rx_obj); + break; + default: + ret = QUP_ERR_UNSUPPORTED; + } + } + + return ret; +} -- cgit v1.2.3