From b29078e4015bbc3e8cf00ba64f0799c087546563 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Fri, 12 May 2017 21:16:41 +0200 Subject: mb/*/*: Remove rtc nvram configurable baud rate There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/soc/nvidia/tegra124/uart.c | 2 +- src/soc/nvidia/tegra210/uart.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'src/soc/nvidia') diff --git a/src/soc/nvidia/tegra124/uart.c b/src/soc/nvidia/tegra124/uart.c index 76ea4261a0..0d5233788d 100644 --- a/src/soc/nvidia/tegra124/uart.c +++ b/src/soc/nvidia/tegra124/uart.c @@ -136,7 +136,7 @@ void uart_fill_lb(void *data) struct lb_serial serial; serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE); - serial.baud = default_baudrate(); + serial.baud = CONFIG_TTYS0_BAUD; serial.regwidth = 4; lb_add_serial(&serial, data); diff --git a/src/soc/nvidia/tegra210/uart.c b/src/soc/nvidia/tegra210/uart.c index 608b443dea..1c52687491 100644 --- a/src/soc/nvidia/tegra210/uart.c +++ b/src/soc/nvidia/tegra210/uart.c @@ -123,7 +123,7 @@ void uart_fill_lb(void *data) struct lb_serial serial; serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; serial.baseaddr = CONFIG_CONSOLE_SERIAL_TEGRA210_UART_ADDRESS; - serial.baud = default_baudrate(); + serial.baud = CONFIG_TTYS0_BAUD; serial.regwidth = 4; lb_add_serial(&serial, data); -- cgit v1.2.3