From 50340f5480c943b6434c9b5e6178731a9977cae3 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Tue, 18 Apr 2017 21:13:30 +0800 Subject: mediatek/mt8173: Add EINT support Add basic support to configure GPIOs to poll for external interrupts (EINT). BRANCH=none BUG=b:36786804 TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are configured to use IRQ flow control when talking to the Cr50 TPM. Change-Id: I9d52591661a5a74ec1fd9a081f606f0a08a3a6ab Signed-off-by: Daniel Kurtz Reviewed-on: https://review.coreboot.org/19362 Reviewed-by: Julius Werner Tested-by: build bot (Jenkins) --- src/soc/mediatek/mt8173/gpio.c | 62 ++++++++++++++++++++++++ src/soc/mediatek/mt8173/include/soc/addressmap.h | 1 + src/soc/mediatek/mt8173/include/soc/gpio.h | 51 +++++++++++++++++++ 3 files changed, 114 insertions(+) (limited to 'src/soc/mediatek/mt8173') diff --git a/src/soc/mediatek/mt8173/gpio.c b/src/soc/mediatek/mt8173/gpio.c index e19c769c33..c5ca08b923 100644 --- a/src/soc/mediatek/mt8173/gpio.c +++ b/src/soc/mediatek/mt8173/gpio.c @@ -25,6 +25,7 @@ enum { MAX_GPIO_REG_BITS = 16, MAX_GPIO_MODE_PER_REG = 5, GPIO_MODE_BITS = 3, + MAX_EINT_REG_BITS = 32, }; enum { @@ -48,6 +49,12 @@ static void pos_bit_calc_for_mode(u32 pin, u32 *pos, u32 *bit) *bit = (pin % MAX_GPIO_MODE_PER_REG) * GPIO_MODE_BITS; } +static void pos_bit_calc_for_eint(u32 pin, u32 *pos, u32 *bit) +{ + *pos = pin / MAX_EINT_REG_BITS; + *bit = pin % MAX_EINT_REG_BITS; +} + static s32 gpio_set_dir(u32 pin, u32 dir) { u32 pos; @@ -175,3 +182,58 @@ void gpio_output(gpio_t gpio, int value) gpio_set_dir(gpio, GPIO_DIRECTION_OUT); gpio_set_mode(gpio, GPIO_MODE); } + +int gpio_eint_poll(gpio_t gpio) +{ + u32 pos; + u32 bit; + u32 status; + + assert(gpio <= MAX_8173_GPIO); + + pos_bit_calc_for_eint(gpio, &pos, &bit); + + status = (read32(&mt8173_eint->sta.regs[pos]) >> bit) & 0x1; + + if (status) + write32(&mt8173_eint->ack.regs[pos], 1 << bit); + + return status; +} + +void gpio_eint_configure(gpio_t gpio, enum gpio_irq_type type) +{ + u32 pos; + u32 bit, mask; + + assert(gpio <= MAX_8173_GPIO); + + pos_bit_calc_for_eint(gpio, &pos, &bit); + mask = 1 << bit; + + /* Make it an input first. */ + gpio_input_pullup(gpio); + + write32(&mt8173_eint->d0en[pos], mask); + + switch (type) { + case IRQ_TYPE_EDGE_FALLING: + write32(&mt8173_eint->sens_clr.regs[pos], mask); + write32(&mt8173_eint->pol_clr.regs[pos], mask); + break; + case IRQ_TYPE_EDGE_RISING: + write32(&mt8173_eint->sens_clr.regs[pos], mask); + write32(&mt8173_eint->pol_set.regs[pos], mask); + break; + case IRQ_TYPE_LEVEL_LOW: + write32(&mt8173_eint->sens_set.regs[pos], mask); + write32(&mt8173_eint->pol_clr.regs[pos], mask); + break; + case IRQ_TYPE_LEVEL_HIGH: + write32(&mt8173_eint->sens_set.regs[pos], mask); + write32(&mt8173_eint->pol_set.regs[pos], mask); + break; + } + + write32(&mt8173_eint->mask_clr.regs[pos], mask); +} diff --git a/src/soc/mediatek/mt8173/include/soc/addressmap.h b/src/soc/mediatek/mt8173/include/soc/addressmap.h index 00c9a6e49c..cab127be75 100644 --- a/src/soc/mediatek/mt8173/include/soc/addressmap.h +++ b/src/soc/mediatek/mt8173/include/soc/addressmap.h @@ -34,6 +34,7 @@ enum { SPM_BASE = IO_PHYS + 0x6000, RGU_BASE = IO_PHYS + 0x7000, GPT_BASE = IO_PHYS + 0x8000, + EINT_BASE = IO_PHYS + 0xB000, PMIC_WRAP_BASE = IO_PHYS + 0xD000, CHA_DDRPHY_BASE = IO_PHYS + 0xF000, CHB_DRAMCAO_BASE = IO_PHYS + 0x11000, diff --git a/src/soc/mediatek/mt8173/include/soc/gpio.h b/src/soc/mediatek/mt8173/include/soc/gpio.h index 3968d04f94..1c05e48b14 100644 --- a/src/soc/mediatek/mt8173/include/soc/gpio.h +++ b/src/soc/mediatek/mt8173/include/soc/gpio.h @@ -87,4 +87,55 @@ void gpio_set_pull(gpio_t gpio, enum pull_enable enable, void gpio_set_mode(gpio_t gpio, int mode); void gpio_init(enum external_power); +enum gpio_irq_type { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_LEVEL_LOW, +}; + +struct eint_section { + uint32_t regs[7]; + uint32_t align1[9]; +}; + +struct eint_regs { + struct eint_section sta; + struct eint_section ack; + struct eint_section mask; + struct eint_section mask_set; + struct eint_section mask_clr; + struct eint_section sens; + struct eint_section sens_set; + struct eint_section sens_clr; + struct eint_section soft; + struct eint_section soft_set; + struct eint_section soft_clr; + struct eint_section rsv00; + struct eint_section pol; + struct eint_section pol_set; + struct eint_section pol_clr; + struct eint_section rsv01; + uint32_t d0en[7]; + uint32_t rsv02; + uint32_t d1en[7]; +}; + +check_member(eint_regs, d1en, 0x420); + +static struct eint_regs *const mt8173_eint = (void *)(EINT_BASE); + +/* + * Firmware never enables interrupts on this platform. This function + * reads current EINT status and clears the pending interrupt. + * + * Returns 1 if the interrupt was pending, else 0. + */ +int gpio_eint_poll(gpio_t gpio); + +/* + * Configure a GPIO to handle external interrupts (EINT) of given irq type. + */ +void gpio_eint_configure(gpio_t gpio, enum gpio_irq_type type); + #endif /* SOC_MEDIATEK_MT8173_GPIO_H */ -- cgit v1.2.3