From ef08545bff67c8b264e168117c39100566f26bfd Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Fri, 2 Jun 2017 18:10:59 -0700 Subject: soc/intel/skylake: Add USB port number information to wake source USB port status register can be used to decide if a particular port was responsible for generating PME# resulting in device wake: 1. CSC bit is set and port is capable of waking on connect/disconnect 2. PLC bit is set and port is in resume state BUG=b:37088992 TEST=Verified with wake on USB2.0 port 3, mosys shows: 19 | 2017-06-08 15:43:30 | Wake Source | PME - XHCI (USB 2.0 port) | 3 Change-Id: Ie4fa87393d8f096c4b3dca5f7a97f194cb065468 Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/20122 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/soc/intel/skylake/elog.c | 148 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 147 insertions(+), 1 deletion(-) (limited to 'src/soc/intel') diff --git a/src/soc/intel/skylake/elog.c b/src/soc/intel/skylake/elog.c index d127fcc246..fde8be2f7d 100644 --- a/src/soc/intel/skylake/elog.c +++ b/src/soc/intel/skylake/elog.c @@ -23,6 +23,7 @@ #include #include #include +#include static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start) { @@ -36,6 +37,138 @@ static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start) } } +#define XHCI_USB2_PORT_STATUS_REG 0x480 +#define XHCI_USB3_PORT_STATUS_REG 0x540 +#define XHCI_USB2_PORT_NUM 10 +#define XHCI_USB3_PORT_NUM 6 +/* Wake on disconnect enable */ +#define XHCI_STATUS_WDE (1 << 26) +/* Wake on connect enable */ +#define XHCI_STATUS_WCE (1 << 25) +/* Port link status change */ +#define XHCI_STATUS_PLC (1 << 22) +/* Connect status change */ +#define XHCI_STATUS_CSC (1 << 17) +/* Port link status */ +#define XHCI_STATUS_PLS_SHIFT (5) +#define XHCI_STATUS_PLS_MASK (0xF << XHCI_STATUS_PLS_SHIFT) +#define XHCI_STATUS_PLS_RESUME (15 << XHCI_STATUS_PLS_SHIFT) + +static bool pch_xhci_csc_set(uint32_t port_status) +{ + return !!(port_status & XHCI_STATUS_CSC); +} + +static bool pch_xhci_wake_capable(uint32_t port_status) +{ + return !!((port_status & XHCI_STATUS_WCE) | + (port_status & XHCI_STATUS_WDE)); +} + +static bool pch_xhci_plc_set(uint32_t port_status) +{ + return !!(port_status & XHCI_STATUS_PLC); +} + +static bool pch_xhci_resume(uint32_t port_status) +{ + return (port_status & XHCI_STATUS_PLS_MASK) == XHCI_STATUS_PLS_RESUME; +} + +/* + * Check if a particular USB port caused wake by: + * 1. Change in connect/disconnect status (if enabled) + * 2. USB device activity + * + * Params: + * base : MMIO address of first port. + * num : Number of ports. + * event : Event that needs to be added in case wake source is found. + * + * Return value: + * true : Wake source was found. + * false : Wake source was not found. + */ +static bool pch_xhci_port_wake_check(uintptr_t base, uint8_t num, + uint32_t event) +{ + uint8_t i; + uint32_t port_status; + bool found = false; + + for (i = 0; i < num; i++, base += 0x10) { + /* Read port status and control register for the port. */ + port_status = read32((void *)base); + + /* + * Check if CSC bit is set and port is capable of wake on + * connect/disconnect to identify if the port caused wake + * event for usb attach/detach. + */ + if (pch_xhci_csc_set(port_status) && + pch_xhci_wake_capable(port_status)) { + elog_add_event_wake(event, i + 1); + found = true; + } + + /* + * Check if PLC is set and PLS indicates resume to identify if + * the port caused wake event for usb activity. + */ + if (pch_xhci_plc_set(port_status) && + pch_xhci_resume(port_status)) { + elog_add_event_wake(event, i + 1); + found = true; + } + } + return found; +} + +/* + * Update elog event and instance depending upon the USB2 port that caused + * the wake event. + * + * Return value: + * true = Indicates that USB2 wake event was found. + * false = Indicates that USB2 wake event was not found. + */ +static inline bool pch_xhci_usb2_update_wake_event(uintptr_t mmio_base) +{ + return pch_xhci_port_wake_check(mmio_base + XHCI_USB2_PORT_STATUS_REG, + XHCI_USB2_PORT_NUM, + ELOG_WAKE_SOURCE_PME_XHCI_USB_2); +} + +/* + * Update elog event and instance depending upon the USB3 port that caused + * the wake event. + * + * Return value: + * true = Indicates that USB3 wake event was found. + * false = Indicates that USB3 wake event was not found. + */ +static inline bool pch_xhci_usb3_update_wake_event(uintptr_t mmio_base) +{ + return pch_xhci_port_wake_check(mmio_base + XHCI_USB3_PORT_STATUS_REG, + XHCI_USB3_PORT_NUM, + ELOG_WAKE_SOURCE_PME_XHCI_USB_3); +} + +static bool pch_xhci_update_wake_event(device_t dev) +{ + uintptr_t mmio_base; + bool event_found = false; + mmio_base = ALIGN_DOWN(pci_read_config32(dev, PCI_BASE_ADDRESS_0), 16); + + if (pch_xhci_usb2_update_wake_event(mmio_base)) + event_found = true; + + if (pch_xhci_usb3_update_wake_event(mmio_base)) + event_found = true; + + return event_found; +} + struct pme_status_info { int devfn; uint8_t reg_offset; @@ -44,6 +177,19 @@ struct pme_status_info { #define PME_STS_BIT (1 << 15) +static void pch_log_add_elog_event(const struct pme_status_info *info, + device_t dev) +{ + /* + * If wake source is XHCI, check for detailed wake source events on + * USB2/3 ports. + */ + if ((info->devfn == PCH_DEVFN_XHCI) && pch_xhci_update_wake_event(dev)) + return; + + elog_add_event_wake(info->elog_event, 0); +} + static void pch_log_pme_internal_wake_source(void) { size_t i; @@ -87,7 +233,7 @@ static void pch_log_pme_internal_wake_source(void) if ((val == 0xFFFF) || !(val & PME_STS_BIT)) continue; - elog_add_event_wake(pme_status_info[i].elog_event, 0); + pch_log_add_elog_event(&pme_status_info[i], dev); dev_found = true; } -- cgit v1.2.3