From aaaef061792f7904d75f401e1de376311d6cdd0b Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Mon, 28 Jul 2014 14:20:58 -0600 Subject: fsp_baytrail/.../gpio.h: Add GPIO_NC1 for GPIOS on func 1 The GPIO_NC setting sets up the gpio as a no-connect - sets it as an input, and pulls it high. It makes an assumption that the GPIO function is muxing function 0. There are a few GPIOs that are on function 1 instead: * GPIO_S0_SC[092-93] * GPIO_S5[11-21] For these GPIOs, use the GPIO_NC1 setting instead of GPIO_NC. Change-Id: Iac6790b40e87ad4ac9a3b265a8e10662186c1201 Signed-off-by: Martin Roth Reviewed-on: http://review.coreboot.org/6428 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Edward O'Callaghan --- src/soc/intel/fsp_baytrail/baytrail/gpio.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'src/soc/intel') diff --git a/src/soc/intel/fsp_baytrail/baytrail/gpio.h b/src/soc/intel/fsp_baytrail/baytrail/gpio.h index 4c9e8a821d..957b0defd8 100644 --- a/src/soc/intel/fsp_baytrail/baytrail/gpio.h +++ b/src/soc/intel/fsp_baytrail/baytrail/gpio.h @@ -156,8 +156,8 @@ #define PAD_VAL_DEFAULT PAD_VAL_INPUT /* Configure GPIOs as MMIO by default */ -#define GPIO_INPUT_PU_10K \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \ +#define GPIO_INPUT_PU_10K(_func) \ + { .pad_conf0 = PAD_FUNC##_func | PAD_PU_10K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, \ .use_sel = GPIO_USE_MMIO, \ @@ -265,9 +265,10 @@ /* Common default GPIO settings */ #define GPIO_INPUT GPIO_INPUT_NOPU #define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU -#define GPIO_INPUT_PU GPIO_INPUT_PU_10K +#define GPIO_INPUT_PU GPIO_INPUT_PU_10K(0) #define GPIO_INPUT_PD GPIO_INPUT_PD_10K -#define GPIO_NC GPIO_INPUT_PU_10K +#define GPIO_NC GPIO_INPUT_PU_10K(0) +#define GPIO_NC1 GPIO_INPUT_PU_10K(1) #define GPIO_DEFAULT GPIO_FUNC0 /* 16 DirectIRQs per supported bank */ -- cgit v1.2.3