From a90a59f5a3bfc22d6317186c004409469d1b031e Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Mon, 4 Nov 2013 11:22:27 -0800 Subject: baytrail: Fix XHCI problems and re-enable - a few clock gating bits were set improperly and were preventing the system from transitioning out of S0 state. - the XHCC registers were not getting the top byte set properly which includes things like DMA write request size and request boundary crossing control. This was causing memory corruption. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot kernel from USB on rambi with XHCI driver Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703 Signed-off-by: Duncan Laurie Reviewed-on: https://chromium-review.googlesource.com/175558 Reviewed-by: Aaron Durbin Signed-off-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/4933 Tested-by: build bot (Jenkins) --- src/soc/intel/baytrail/xhci.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'src/soc/intel') diff --git a/src/soc/intel/baytrail/xhci.c b/src/soc/intel/baytrail/xhci.c index 244a4dcec7..30e60981e9 100644 --- a/src/soc/intel/baytrail/xhci.c +++ b/src/soc/intel/baytrail/xhci.c @@ -83,11 +83,11 @@ const struct reg_script xhci_init_script[] = { /* BAR + 0x0010[10,9,5]=110b */ REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x0010, ~0x00000020, 0x00000600), /* BAR + 0x8058[20,16,8]=110b */ - REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8058, ~0x00000010, 0x00110000), + REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8058, ~0x00000100, 0x00110000), /* BAR + 0x8060[25]=1b */ REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8060, 0x02000000), - /* BAR + 0x80e0[19,9,6]=001b, toggle bit 24=1 */ - REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x00010020, 0x01000040), + /* BAR + 0x80e0[16,9,6]=001b, toggle bit 24=1 */ + REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x00010200, 0x01000040), /* BAR + 0x80e0 toggle bit 24=0 */ REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x01000000, 0), /* BAR + 0x80f0[20]=0b */ @@ -113,7 +113,7 @@ const struct reg_script xhci_init_script[] = { const struct reg_script xhci_clock_gating_script[] = { /* ConfigureXhciClockGating() */ /* D20:F0:40[21:19,18,10:8]=000,1,001 (don't write byte 3) */ - REG_PCI_RMW16(0x40, ~0x0300, 0x0010), + REG_PCI_RMW16(0x40, ~0x0600, 0x0100), REG_PCI_RMW8(0x42, ~0x38, 0x04), /* D20:F0:44[5:3]=001b */ REG_PCI_RMW16(0x44, ~0x0030, 0x0008), @@ -187,6 +187,9 @@ static void xhci_init(device_t dev) REG_SCRIPT_NEXT(xhci_init_script), /* Initialize clock gating */ REG_SCRIPT_NEXT(xhci_clock_gating_script), + /* Finalize XHCC1 and XHCC2 */ + REG_PCI_RMW32(0x44, ~0x00000000, 0x83c00000), + REG_PCI_RMW32(0x40, ~0x00800000, 0x80000000), /* Set USB2 Port Routing Mask */ REG_PCI_WRITE32(XHCI_USB2PRM, BYTM_USB2_PORT_MAP), /* Set USB3 Port Routing Mask */ -- cgit v1.2.3