From 1c329a05de8b821cd85c25cf8ab7d1e73714073f Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Mon, 26 Nov 2018 15:43:18 +0530 Subject: soc/intel/icelake: Fix IO decode setup Make pch_early_iorange_init() function similar to soc/intel/cannonlake/bootblock/pch.c while fixing below issue: * COM1 not being enabled properly. TEST=Able to get serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I5ab02f46d27e667be3d9328d94b634ef04038d2f Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/c/29835 Tested-by: build bot (Jenkins) Reviewed-by: Aamir Bohra --- src/soc/intel/icelake/bootblock/pch.c | 41 +++++++++++++++++++++++---------- src/soc/intel/icelake/include/soc/lpc.h | 10 -------- 2 files changed, 29 insertions(+), 22 deletions(-) (limited to 'src/soc/intel') diff --git a/src/soc/intel/icelake/bootblock/pch.c b/src/soc/intel/icelake/bootblock/pch.c index 96722e21be..5268856007 100644 --- a/src/soc/intel/icelake/bootblock/pch.c +++ b/src/soc/intel/icelake/bootblock/pch.c @@ -43,6 +43,9 @@ #define PCR_PSFX_TO_SHDW_PCIEN_IOEN 0x01 #define PCR_PSFX_T0_SHDW_PCIEN 0x1C +#define PCR_DMI_DMICTL 0x2234 +#define PCR_DMI_DMICTL_SRLOCK (1 << 31) + #define PCR_DMI_ACPIBA 0x27B4 #define PCR_DMI_ACPIBDID 0x27B8 #define PCR_DMI_PMBASEA 0x27AC @@ -146,24 +149,38 @@ static void soc_config_tco(void) outw(tcocnt, tcobase + TCO1_CNT); } +static int pch_check_decode_enable(void) +{ + uint32_t dmi_control; + + /* + * This cycle decoding is only allowed to set when + * DMICTL.SRLOCK is 0. + */ + dmi_control = pcr_read32(PID_DMI, PCR_DMI_DMICTL); + if (dmi_control & PCR_DMI_DMICTL_SRLOCK) + return -1; + return 0; +} + void pch_early_iorange_init(void) { - uint16_t dec_rng, dec_en = 0; + uint16_t io_enables = LPC_IOE_SUPERIO_2E_2F | LPC_IOE_KBC_60_64 | + LPC_IOE_EC_62_66 | LPC_IOE_LGE_200; /* IO Decode Range */ - if (IS_ENABLED(CONFIG_DRIVERS_UART_8250IO) && - IS_ENABLED(CONFIG_UART_DEBUG)) { - dec_rng = COMA_RANGE | (COMB_RANGE << 4); - dec_en = COMA_LPC_EN | COMB_LPC_EN; - pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, dec_rng); - pcr_write16(PID_DMI, PCR_DMI_LPCIOD, dec_rng); - } + if (IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)) + lpc_io_setup_comm_a_b(); /* IO Decode Enable */ - dec_en |= SE_LPC_EN | KBC_LPC_EN | MC1_LPC_EN | GAMEL_LPC_EN | - LPC_IOE_KBC_60_64; - pci_write_config16(PCH_DEV_LPC, LPC_EN, dec_en); - pcr_write16(PID_DMI, PCR_DMI_LPCIOE, dec_en); + if (pch_check_decode_enable() == 0) { + io_enables = lpc_enable_fixed_io_ranges(io_enables); + /* + * Set up LPC IO Enables PCR[DMI] + 2774h [15:0] to the same + * value program in LPC PCI offset 82h. + */ + pcr_write16(PID_DMI, PCR_DMI_LPCIOE, io_enables); + } /* Program generic IO Decode Range */ pch_enable_lpc(); diff --git a/src/soc/intel/icelake/include/soc/lpc.h b/src/soc/intel/icelake/include/soc/lpc.h index dfcfa353c8..ebfcaa867f 100644 --- a/src/soc/intel/icelake/include/soc/lpc.h +++ b/src/soc/intel/icelake/include/soc/lpc.h @@ -32,16 +32,6 @@ #define COMA_RANGE 0x0 /* 0x3F8 - 0x3FF COM1*/ #define COMB_RANGE 0x1 /* 0x2F8 - 0x2FF COM2*/ #define LPC_EN 0x82 /* LPC IF Enables Register */ -#define MC2_LPC_EN (1 << 13) /* 0x4e/0x4f */ -#define SE_LPC_EN (1 << 12) /* 0x2e/0x2f */ -#define MC1_LPC_EN (1 << 11) /* 0x62/0x66 */ -#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ -#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ -#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ -#define FDD_LPC_EN (1 << 3) /* Floppy Drive Enable */ -#define LPT_LPC_EN (1 << 2) /* Parallel Port Enable */ -#define COMB_LPC_EN (1 << 1) /* Com Port B Enable */ -#define COMA_LPC_EN (1 << 0) /* Com Port A Enable */ #define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ #define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ #define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ -- cgit v1.2.3