From 19af7bc822ada5a60ffbbd5fe233434cbbf9ae09 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Fri, 19 Feb 2021 20:01:31 +0100 Subject: soc/intel/skylake: Correct SMBUS_SLAVE_ADDR definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to document 332691-003EN (SPT-H datasheet volume 2), the hardware defaults to 0x44, which matches what newer platforms use. Change-Id: I494587b0074ab3675c3e88676375f667e757cdf0 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/50941 Reviewed-by: Tim Wawrzynczak Reviewed-by: Michael Niewöhner Reviewed-by: Arthur Heymans Tested-by: build bot (Jenkins) --- src/soc/intel/skylake/include/soc/smbus.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'src/soc/intel/skylake') diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h index 00aae2cbe8..bd86aca20a 100644 --- a/src/soc/intel/skylake/include/soc/smbus.h +++ b/src/soc/intel/skylake/include/soc/smbus.h @@ -17,7 +17,11 @@ #define TCO_INTRD_SEL_SMI (1 << 2) #define TCO_INTRD_SEL_INT (1 << 1) -/* SMBus I/O bits. */ -#define SMBUS_SLAVE_ADDR 0x24 +/* + * Default slave address value for PCH. This value is set to match default + * value set by hardware. It is useful since PCH is able to respond even + * before CPU is up. This is reset by RSMRST# but not by PLTRST#. + */ +#define SMBUS_SLAVE_ADDR 0x44 #endif -- cgit v1.2.3