From 1d14b3e926c15027f9272f1e80b8913fef8cf25d Mon Sep 17 00:00:00 2001 From: Lee Leahy Date: Tue, 12 May 2015 18:23:27 -0700 Subject: soc/intel: Add Skylake SOC support Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/soc/intel/skylake/smmrelocate.c | 138 ++++++++++++++++++++---------------- 1 file changed, 76 insertions(+), 62 deletions(-) (limited to 'src/soc/intel/skylake/smmrelocate.c') diff --git a/src/soc/intel/skylake/smmrelocate.c b/src/soc/intel/skylake/smmrelocate.c index 47d6385a63..874d95f10a 100644 --- a/src/soc/intel/skylake/smmrelocate.c +++ b/src/soc/intel/skylake/smmrelocate.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include @@ -34,6 +35,7 @@ #include #include #include +#include "chip.h" /* This gets filled in and used during relocation. */ static struct smm_relocation_params smm_reloc_params; @@ -46,48 +48,44 @@ static inline void write_smrr(struct smm_relocation_params *relo_params) wrmsr(SMRRphysMask_MSR, relo_params->smrr_mask); } -static inline void write_emrr(struct smm_relocation_params *relo_params) -{ - printk(BIOS_DEBUG, "Writing EMRR. base = 0x%08x, mask=0x%08x\n", - relo_params->emrr_base.lo, relo_params->emrr_mask.lo); - wrmsr(EMRRphysBase_MSR, relo_params->emrr_base); - wrmsr(EMRRphysMask_MSR, relo_params->emrr_mask); -} - static inline void write_uncore_emrr(struct smm_relocation_params *relo_params) { printk(BIOS_DEBUG, "Writing UNCORE_EMRR. base = 0x%08x, mask=0x%08x\n", relo_params->uncore_emrr_base.lo, relo_params->uncore_emrr_mask.lo); - wrmsr(UNCORE_EMRRphysBase_MSR, relo_params->uncore_emrr_base); - wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask); + wrmsr(UNCORE_EMRR_PHYS_BASE_MSR, relo_params->uncore_emrr_base); + wrmsr(UNCORE_EMRR_PHYS_MASK_MSR, relo_params->uncore_emrr_mask); } static void update_save_state(int cpu, - struct smm_relocation_params *relo_params, - const struct smm_runtime *runtime) + struct smm_relocation_params *relo_params, + const struct smm_runtime *runtime) { u32 smbase; u32 iedbase; - /* The relocated handler runs with all CPUs concurrently. Therefore + /* + * The relocated handler runs with all CPUs concurrently. Therefore * stagger the entry points adjusting SMBASE downwards by save state - * size * CPU num. */ + * size * CPU num. + */ smbase = relo_params->smram_base - cpu * runtime->save_state_size; iedbase = relo_params->ied_base; printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n", smbase, iedbase); - /* All threads need to set IEDBASE and SMBASE to the relocated + /* + * All threads need to set IEDBASE and SMBASE to the relocated * handler region. However, the save state location depends on the * smm_save_state_in_msrs field in the relocation parameters. If * smm_save_state_in_msrs is non-zero then the CPUs are relocating * the SMM handler in parallel, and each CPUs save state area is * located in their respective MSR space. If smm_save_state_in_msrs * is zero then the SMM relocation is happening serially so the - * save state is at the same default location for all CPUs. */ + * save state is at the same default location for all CPUs. + */ if (relo_params->smm_save_state_in_msrs) { msr_t smbase_msr; msr_t iedbase_msr; @@ -95,8 +93,10 @@ static void update_save_state(int cpu, smbase_msr.lo = smbase; smbase_msr.hi = 0; - /* According the BWG the IEDBASE MSR is in bits 63:32. It's - * not clear why it differs from the SMBASE MSR. */ + /* + * According the BWG the IEDBASE MSR is in bits 63:32. It's + * not clear why it differs from the SMBASE MSR. + */ iedbase_msr.lo = 0; iedbase_msr.hi = iedbase; @@ -131,9 +131,11 @@ static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params) return relo_params->smm_save_state_in_msrs; } -/* The relocation work is actually performed in SMM context, but the code +/* + * The relocation work is actually performed in SMM context, but the code * resides in the ramstage module. This occurs by trampolining from the default - * SMRAM entry point to here. */ + * SMRAM entry point to here. + */ static void asmlinkage cpu_smm_do_relocation(void *arg) { msr_t mtrr_cap; @@ -155,16 +157,20 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu); - /* Determine if the processor supports saving state in MSRs. If so, + /* + * Determine if the processor supports saving state in MSRs. If so, * enable it before the non-BSPs run so that SMM relocation can occur - * in parallel in the non-BSP CPUs. */ + * in parallel in the non-BSP CPUs. + */ if (cpu == 0) { - /* If smm_save_state_in_msrs is 1 then that means this is the + /* + * If smm_save_state_in_msrs is 1 then that means this is the * 2nd time through the relocation handler for the BSP. * Parallel SMM handler relocation is taking place. However, * it is desired to access other CPUs save state in the real * SMM handler. Therefore, disable the SMM save state in MSRs - * feature. */ + * feature. + */ if (relo_params->smm_save_state_in_msrs) { msr_t smm_feature_control; @@ -172,10 +178,12 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) smm_feature_control.lo &= ~SMM_CPU_SAVE_EN; wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control); } else if (bsp_setup_msr_save_state(relo_params)) - /* Just return from relocation handler if MSR save + /* + * Just return from relocation handler if MSR save * state is enabled. In that case the BSP will come * back into the relocation handler to setup the new - * SMBASE as well disabling SMM save state in MSRs. */ + * SMBASE as well disabling SMM save state in MSRs. + */ return; } @@ -186,14 +194,6 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) mtrr_cap = rdmsr(MTRRcap_MSR); if (mtrr_cap.lo & SMRR_SUPPORTED) write_smrr(relo_params); - - if (mtrr_cap.lo & EMRR_SUPPORTED) { - write_emrr(relo_params); - /* UNCORE_EMRR msrs are package level. Therefore, only - * configure these MSRs on the BSP. */ - if (cpu == 0) - write_uncore_emrr(relo_params); - } } static u32 northbridge_get_base_reg(device_t dev, int reg) @@ -207,7 +207,7 @@ static u32 northbridge_get_base_reg(device_t dev, int reg) } static void fill_in_relocation_params(device_t dev, - struct smm_relocation_params *params) + struct smm_relocation_params *params) { u32 tseg_size; u32 tsegmb; @@ -217,23 +217,26 @@ static void fill_in_relocation_params(device_t dev, int phys_bits; /* All range registers are aligned to 4KiB */ const u32 rmask = ~((1 << 12) - 1); + config_t *conf = dev->chip_info; - /* Some of the range registers are dependent on the number of physical - * address bits supported. */ + /* + * Some of the range registers are dependent on the number of physical + * address bits supported. + */ phys_bits = cpuid_eax(0x80000008) & 0xff; - /* The range bounded by the TSEGMB and BGSM registers encompasses the - * SMRAM range as well as the IED range. However, the SMRAM available - * to the handler is 4MiB since the IEDRAM lives TSEGMB + 4MiB. + /* + * The range bounded by the TSEGMB and BGSM registers encompasses the + * SMRAM range as well as the IED range. */ tsegmb = northbridge_get_base_reg(dev, TSEG); bgsm = northbridge_get_base_reg(dev, BGSM); tseg_size = bgsm - tsegmb; + params->ied_size = conf->IedSize; + params->smram_size = tseg_size - params->ied_size; params->smram_base = tsegmb; - params->smram_size = 4 << 20; params->ied_base = tsegmb + params->smram_size; - params->ied_size = tseg_size - params->smram_size; /* Adjust available SMM handler memory size. */ params->smram_size -= CONFIG_SMM_RESERVED_SIZE; @@ -248,8 +251,10 @@ static void fill_in_relocation_params(device_t dev, emrr_base = (params->ied_base + (2 << 20)) & rmask; emrr_size = params->ied_size - (2 << 20); - /* EMRR has 46 bits of valid address aligned to 4KiB. It's dependent - * on the number of physical address bits supported. */ + /* + * EMRR has 46 bits of valid address aligned to 4KiB. It's dependent + * on the number of physical address bits supported. + */ params->emrr_base.lo = emrr_base | MTRR_TYPE_WRBACK; params->emrr_base.hi = 0; params->emrr_mask.lo = (~(emrr_size - 1) & rmask) | MTRRphysMaskValid; @@ -259,7 +264,7 @@ static void fill_in_relocation_params(device_t dev, params->uncore_emrr_base.lo = emrr_base; params->uncore_emrr_base.hi = 0; params->uncore_emrr_mask.lo = (~(emrr_size - 1) & rmask) | - MTRRphysMaskValid; + MTRRphysMaskValid; params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1; } @@ -280,14 +285,16 @@ static void adjust_apic_id_map(struct smm_loader_params *smm_params) } static int install_relocation_handler(int num_cpus, - struct smm_relocation_params *relo_params) + struct smm_relocation_params *relo_params) { - /* The default SMM entry can happen in parallel or serially. If the + /* + * The default SMM entry can happen in parallel or serially. If the * default SMM entry is done in parallel the BSP has already setup * the saving state to each CPU's MSRs. At least one save state size * is required for the initial SMM entry for the BSP to determine if * parallel SMM relocation is even feasible. Set the stack size to - * the save state size, and call into the do_relocation handler. */ + * the save state size, and call into the do_relocation handler. + */ int save_state_size = sizeof(em64t101_smm_state_save_area_t); struct smm_loader_params smm_params = { .per_cpu_stack_size = save_state_size, @@ -318,6 +325,9 @@ static void setup_ied_area(struct smm_relocation_params *params) ied_base = (void *)params->ied_base; + printk(BIOS_DEBUG, "IED base = 0x%08x\n", params->ied_base); + printk(BIOS_DEBUG, "IED size = 0x%08x\n", params->ied_size); + /* Place IED header at IEDBASE. */ memcpy(ied_base, &ied, sizeof(ied)); @@ -326,10 +336,12 @@ static void setup_ied_area(struct smm_relocation_params *params) } static int install_permanent_handler(int num_cpus, - struct smm_relocation_params *relo_params) + struct smm_relocation_params *relo_params) { - /* There are num_cpus concurrent stacks and num_cpus concurrent save - * state areas. Lastly, set the stack size to the save state size. */ + /* + * There are num_cpus concurrent stacks and num_cpus concurrent save + * state areas. Lastly, set the stack size to the save state size. + */ int save_state_size = sizeof(em64t101_smm_state_save_area_t); struct smm_loader_params smm_params = { .per_cpu_stack_size = save_state_size, @@ -341,7 +353,7 @@ static int install_permanent_handler(int num_cpus, printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", relo_params->smram_base); if (smm_load_module((void *)relo_params->smram_base, - relo_params->smram_size, &smm_params)) + relo_params->smram_size, &smm_params)) return -1; adjust_apic_id_map(&smm_params); @@ -359,14 +371,15 @@ static int cpu_smm_setup(void) fill_in_relocation_params(dev, &smm_reloc_params); - setup_ied_area(&smm_reloc_params); + if (smm_reloc_params.ied_size) + setup_ied_area(&smm_reloc_params); msr = rdmsr(CORE_THREAD_COUNT_MSR); num_cpus = msr.lo & 0xffff; if (num_cpus > CONFIG_MAX_CPUS) { printk(BIOS_CRIT, - "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", - num_cpus, CONFIG_MAX_CPUS); + "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", + num_cpus, CONFIG_MAX_CPUS); } if (install_relocation_handler(num_cpus, &smm_reloc_params)) { @@ -380,7 +393,6 @@ static int cpu_smm_setup(void) } /* Ensure the SMM handlers hit DRAM before performing first SMI. */ - /* TODO(adurbin): Is this really needed? */ wbinvd(); return 0; @@ -398,9 +410,8 @@ int smm_initialize(void) /* Run the relocation handler. */ smm_initiate_relocation(); - if (smm_reloc_params.smm_save_state_in_msrs) { + if (smm_reloc_params.smm_save_state_in_msrs) printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n"); - } return 0; } @@ -421,16 +432,19 @@ void smm_relocate(void) void smm_init(void) { - /* smm_init() is normally called from initialize_cpus() in + /* + * smm_init() is normally called from initialize_cpus() in * lapic_cpu_init.c. However, that path is no longer used. Don't reuse * the function name because that would cause confusion. * The smm_initialize() function above is used to setup SMM at the - * appropriate time. */ + * appropriate time. + */ } void smm_lock(void) { - /* LOCK the SMM memory window and enable normal SMM. + /* + * LOCK the SMM memory window and enable normal SMM. * After running this function, only a full reset can * make the SMM registers writable again. */ -- cgit v1.2.3