From b5026bf9e0d252ba338c64078cb68175c6752c5e Mon Sep 17 00:00:00 2001 From: Werner Zeh Date: Mon, 5 Sep 2016 08:14:23 +0200 Subject: fsp_broadwell_de: Adjust printed address in SPI debug messages For an unknown reason the printed address in the SPI debug messages is modified before it is printed by subtracting the constant 0xf020 from the passed in address. What I suppose this debug code should do is to print the used register address within the SPI controller while any parts of this address that belongs to the SPI base address should be omitted. To fix that remove the subtraction of 0xf020 and adjust the address mask to 0x3ff so that only the offset to the registers inside the SPI controller will be visible in the debug messages. In addition switch to uint8_t and friends over u8 to sync up with used types in this file. Change-Id: I93ba7119873115c7abc80a214cc30363a6930b3b Signed-off-by: Werner Zeh Reviewed-on: https://review.coreboot.org/16500 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin Reviewed-by: York Yang Reviewed-by: Paul Menzel --- src/soc/intel/fsp_broadwell_de/spi.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'src/soc/intel/fsp_broadwell_de/spi.c') diff --git a/src/soc/intel/fsp_broadwell_de/spi.c b/src/soc/intel/fsp_broadwell_de/spi.c index 57f7951c90..116001f010 100644 --- a/src/soc/intel/fsp_broadwell_de/spi.c +++ b/src/soc/intel/fsp_broadwell_de/spi.c @@ -159,60 +159,62 @@ enum { SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 }; -static u8 readb_(const void *addr) +#define SPI_OFFSET_MASK 0x3ff + +static uint8_t readb_(const void *addr) { - u8 v = read8(addr); + uint8_t v = read8(addr); if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { printk(BIOS_DEBUG, "SPI: read %2.2x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); + v, ((uint32_t) addr) & SPI_OFFSET_MASK); } return v; } -static u16 readw_(const void *addr) +static uint16_t readw_(const void *addr) { - u16 v = read16(addr); + uint16_t v = read16(addr); if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { printk(BIOS_DEBUG, "SPI: read %4.4x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); + v, ((uint32_t) addr) & SPI_OFFSET_MASK); } return v; } -static u32 readl_(const void *addr) +static uint32_t readl_(const void *addr) { - u32 v = read32(addr); + uint32_t v = read32(addr); if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { printk(BIOS_DEBUG, "SPI: read %8.8x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); + v, ((uint32_t) addr) & SPI_OFFSET_MASK); } return v; } -static void writeb_(u8 b, void *addr) +static void writeb_(uint8_t b, void *addr) { write8(addr, b); if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { printk(BIOS_DEBUG, "SPI: wrote %2.2x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); + b, ((uint32_t) addr) & SPI_OFFSET_MASK); } } -static void writew_(u16 b, void *addr) +static void writew_(uint16_t b, void *addr) { write16(addr, b); if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { printk(BIOS_DEBUG, "SPI: wrote %4.4x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); + b, ((uint32_t) addr) & SPI_OFFSET_MASK); } } -static void writel_(u32 b, void *addr) +static void writel_(uint32_t b, void *addr) { write32(addr, b); if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { printk(BIOS_DEBUG, "SPI: wrote %8.8x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); + b, ((uint32_t) addr) & SPI_OFFSET_MASK); } } @@ -457,10 +459,10 @@ static int spi_setup_offset(spi_transaction *trans) * * Return the last read status value on success or -1 on failure. */ -static int ich_status_poll(u16 bitmask, int wait_til_set) +static int ich_status_poll(uint16_t bitmask, int wait_til_set) { int timeout = 40000; /* This will result in 400 ms */ - u16 status = 0; + uint16_t status = 0; while (timeout--) { status = readw_(cntlr.status); -- cgit v1.2.3