From 92bd71ff741f61787fbd05155c03c56e5ffaca10 Mon Sep 17 00:00:00 2001 From: Sridhar Siricilla Date: Sun, 20 Feb 2022 00:30:31 +0530 Subject: soc/intel/common: Retry END_OF_POST command As per ME BWG, the patch retries END_OF_POST command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. BUG=b:200251277 TEST=Verify EOP retry mechanism for brya board. Signed-off-by: Sridhar Siricilla Change-Id: Ieaec4d5564e3d962c1cc866351e9e7eaa8e58683 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62192 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- src/soc/intel/common/block/cse/cse_eop.c | 38 +++++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 5 deletions(-) (limited to 'src/soc/intel/common') diff --git a/src/soc/intel/common/block/cse/cse_eop.c b/src/soc/intel/common/block/cse/cse_eop.c index bc6d83764e..c6b527778f 100644 --- a/src/soc/intel/common/block/cse/cse_eop.c +++ b/src/soc/intel/common/block/cse/cse_eop.c @@ -11,13 +11,29 @@ #include #include +#define CSE_MAX_RETRY_CMD 3 + enum cse_cmd_result { CSE_CMD_RESULT_GLOBAL_RESET_REQUESTED, CSE_CMD_RESULT_SUCCESS, CSE_CMD_RESULT_ERROR, CSE_CMD_RESULT_DISABLED, + CSE_CMD_RESULT_RETRY, }; +static enum cse_cmd_result decode_heci_send_receive_error(enum cse_tx_rx_status ret) +{ + switch (ret) { + case CSE_TX_ERR_CSE_NOT_READY: + case CSE_RX_ERR_CSE_NOT_READY: + case CSE_RX_ERR_RESP_LEN_MISMATCH: + case CSE_RX_ERR_TIMEOUT: + return CSE_CMD_RESULT_RETRY; + default: + return CSE_CMD_RESULT_ERROR; + } +} + static bool cse_disable_mei_bus(void) { struct bus_disable_message { @@ -49,6 +65,7 @@ static bool cse_disable_mei_bus(void) static enum cse_cmd_result cse_send_eop(void) { + enum cse_tx_rx_status ret; enum { EOP_REQUESTED_ACTION_CONTINUE = 0, EOP_REQUESTED_ACTION_GLOBAL_RESET = 1, @@ -98,10 +115,9 @@ static enum cse_cmd_result cse_send_eop(void) printk(BIOS_INFO, "HECI: Sending End-of-Post\n"); - if (heci_send_receive(&msg, sizeof(msg), &resp, &resp_size, HECI_MKHI_ADDR)) { - printk(BIOS_ERR, "HECI: EOP send/receive fail\n"); - return CSE_CMD_RESULT_ERROR; - } + ret = heci_send_receive(&msg, sizeof(msg), &resp, &resp_size, HECI_MKHI_ADDR); + if (ret) + return decode_heci_send_receive_error(ret); if (resp.hdr.result) { printk(BIOS_ERR, "HECI: EOP Resp Failed: %u\n", resp.hdr.result); @@ -123,6 +139,18 @@ static enum cse_cmd_result cse_send_eop(void) } } +static enum cse_cmd_result cse_send_cmd_retries(enum cse_cmd_result (*cse_send_command)(void)) +{ + size_t retry; + enum cse_cmd_result ret; + for (retry = 0; retry < CSE_MAX_RETRY_CMD; retry++) { + ret = cse_send_command(); + if (ret != CSE_CMD_RESULT_RETRY) + break; + } + return ret; +} + /* * On EOP error, the BIOS is required to send an MEI bus disable message to the * CSE, followed by disabling all MEI devices. After successfully completing @@ -193,7 +221,7 @@ static void do_send_end_of_post(void) set_cse_device_state(PCH_DEVFN_CSE, DEV_ACTIVE); timestamp_add_now(TS_ME_END_OF_POST_START); - handle_cse_eop_result(cse_send_eop()); + handle_cse_eop_result(cse_send_cmd_retries(cse_send_eop)); timestamp_add_now(TS_ME_END_OF_POST_END); set_cse_device_state(PCH_DEVFN_CSE, DEV_IDLE); -- cgit v1.2.3