From c0dfa7596b09a5a8e63ef726caf11faa6003be1b Mon Sep 17 00:00:00 2001 From: Maxim Polyakov Date: Sat, 20 Jun 2020 17:26:21 +0300 Subject: soc/intel/gpio: Convert PAD_CFG0_RX_POL_* to PAD_RX_POL() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Converts PAD_CFG0_RX_POL_* macros to PAD_RX_POL() to make the code cleaner and reduce the length of the macro. Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard does not change. Change-Id: I09a048fd38ccb994f53c8829c549bc2b368fa546 Signed-off-by: Maxim Polyakov Reviewed-on: https://review.coreboot.org/c/coreboot/+/41033 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) --- src/soc/intel/common/block/include/intelblocks/gpio_defs.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'src/soc/intel/common/block') diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h index f6e139d52d..e257f07215 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h @@ -124,6 +124,7 @@ #define PAD_FUNC(value) PAD_CFG0_MODE_##value #define PAD_RESET(value) PAD_CFG0_LOGICAL_RESET_##value +#define PAD_RX_POL(value) PAD_CFG0_RX_POL_##value #define PAD_TRIG(value) PAD_CFG0_TRIG_##value #define PAD_PULL(value) PAD_CFG1_PULL_##value @@ -147,14 +148,14 @@ #define PAD_IRQ_CFG(route, trig, inv) \ (PAD_CFG0_ROUTE_##route | \ PAD_TRIG(trig) | \ - PAD_CFG0_RX_POL_##inv) + PAD_RX_POL(inv)) #if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) #define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \ (PAD_CFG0_ROUTE_##route1 | \ PAD_CFG0_ROUTE_##route2 | \ PAD_TRIG(trig) | \ - PAD_CFG0_RX_POL_##inv) + PAD_RX_POL(inv)) #endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */ #define _PAD_CFG_STRUCT(__pad, __config0, __config1) \ @@ -272,7 +273,7 @@ */ #define PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, own) \ _PAD_CFG_STRUCT(pad, PAD_FUNC(GPIO) | PAD_RESET(rst) | \ - PAD_TRIG(trig) | PAD_CFG0_RX_POL_NONE | PAD_BUF(TX_DISABLE), \ + PAD_TRIG(trig) | PAD_RX_POL(NONE) | PAD_BUF(TX_DISABLE), \ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE) | PAD_CFG_OWN_GPIO(own)) #define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \ -- cgit v1.2.3