From 3820e3ceed02d21900a060b2c70a031c34cae20d Mon Sep 17 00:00:00 2001 From: Maxim Polyakov Date: Thu, 18 Jul 2019 13:09:12 +0300 Subject: soc/intel/common: gpio_defs: set trig to disable in PAD_CFG_GPO* According to the documentation [1], by default the RX Level/Edge Trig Configuration set to disable (2h = Drive '0') for each pad. Since this setting doesn't matter for the GPO pad, there is no need to change the default value for such pads. The patch updates PAD_CFG_GPO* macros to set trig to disable. It also resolves some problems of creating the PCH/SoC pads configuration based on information from the inteltool dump [2,3] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/34337 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 Change-Id: I39ba83ffaad57656f31147fc72d7a708e5f61163 Signed-off-by: Maxim Polyakov Reviewed-on: https://review.coreboot.org/c/coreboot/+/34406 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber Reviewed-by: Furquan Shaikh --- src/soc/intel/common/block/include/intelblocks/gpio_defs.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'src/soc/intel/common/block') diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h index 0a3e11737a..744095207d 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h @@ -227,25 +227,29 @@ /* General purpose output, no pullup/down. */ #define PAD_CFG_GPO(pad, val, rst) \ _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_DISABLE | !!val, \ PAD_PULL(NONE) | PAD_IOSSTATE(TxLASTRxE)) /* General purpose output, with termination specified */ #define PAD_CFG_TERM_GPO(pad, val, pull, rst) \ _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_DISABLE | !!val, \ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE)) /* General purpose output, no pullup/down. */ #define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \ _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_DISABLE | !!val, \ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_GPIO_DRIVER) /* General purpose output. */ #define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm) \ _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_DISABLE | !!val, \ PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm)) /* General purpose input */ -- cgit v1.2.3