From 2c36889437e591bb3389bdf98b53e34082c391c3 Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Thu, 18 Oct 2018 16:22:37 -0700 Subject: soc/intel/common/block/gpio: Allow GPI to be dual-routed This change adds new macros to GPIO common library helpers to allow a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds a helper macro to configure a pad for IRQ and wake. Above macros are guarded using a newly added Kconfig option SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only by SoCs that have been validated to allow dual route of GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that have been validated to work with dual-routing of GPIs for IRQ and wake. BUG=b:117553222 Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/29188 Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) --- src/soc/intel/common/block/gpio/Kconfig | 7 +++++++ .../common/block/include/intelblocks/gpio_defs.h | 20 ++++++++++++++++++++ 2 files changed, 27 insertions(+) (limited to 'src/soc/intel/common/block') diff --git a/src/soc/intel/common/block/gpio/Kconfig b/src/soc/intel/common/block/gpio/Kconfig index d229ea3e60..66cc1822c6 100644 --- a/src/soc/intel/common/block/gpio/Kconfig +++ b/src/soc/intel/common/block/gpio/Kconfig @@ -42,3 +42,10 @@ config SOC_INTEL_COMMON_BLOCK_GPIO_MULTI_ACPI_DEVICES depends on SOC_INTEL_COMMON_BLOCK_GPIO bool default n + +# Indicate if SoC supports dual-routing of GPIOs (to different paths like SCI, +# NMI, SMI, IOAPIC). This is required to support IRQ and wake on the same pad. +config SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT + depends on SOC_INTEL_COMMON_BLOCK_GPIO + bool + default n diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h index ae6bbfcc52..418b6abdb5 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h @@ -130,6 +130,14 @@ PAD_CFG0_TRIG_##trig | \ PAD_CFG0_RX_POL_##inv) +#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) +#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \ + (PAD_CFG0_ROUTE_##route1 | \ + PAD_CFG0_ROUTE_##route2 | \ + PAD_CFG0_TRIG_##trig | \ + PAD_CFG0_RX_POL_##inv) +#endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */ + #define _PAD_CFG_STRUCT(__pad, __config0, __config1) \ { \ .pad = __pad, \ @@ -334,4 +342,16 @@ PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE)) +#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) +#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \ + PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \ + PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE)) + +#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \ + PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI) + +#endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */ + #endif /* _SOC_BLOCK_GPIO_DEFS_H_ */ -- cgit v1.2.3