From 4a12a56cdf1ea073def5e62386eebac32ff59cd3 Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Wed, 25 Jul 2018 14:12:58 -0700 Subject: soc/intel/common/block/gpio: Add API for gpio_configure_pads_with_override This function adds support for gpio_configure_pads_with_override which: 1. Takes as input two GPIO tables -- base config table and override config table 2. Configures each pad in base config by first checking if there is a config available for the pad in override config table. If yes, then uses the one from override config table. Else, uses the base config to configure the pad. This is done to allow sharing of GPIO tables across baseboard-variants for various boards i.e. Each board can have a base config table which is provided by the baseboard and an optional override config table that can be provided by a variant to configure certain GPIOs differently. It is helpful when the variant GPIO diff list is not very huge compared to the baseboard. BUG=b:111743717 TEST=Verified that the GPIO config for phaser is same with and without this change. Change-Id: I1c5dc72c8368957201ab53d2e8398ff861341a4c Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/27640 Reviewed-by: Aaron Durbin Reviewed-by: Justin TerAvest Tested-by: build bot (Jenkins) --- src/soc/intel/common/block/include/intelblocks/gpio.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'src/soc/intel/common/block/include') diff --git a/src/soc/intel/common/block/include/intelblocks/gpio.h b/src/soc/intel/common/block/include/intelblocks/gpio.h index 625ebef881..4e26db3619 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio.h @@ -132,6 +132,21 @@ int gpi_status_get(const struct gpi_status *sts, gpio_t gpi); */ void gpio_configure_pads(const struct pad_config *cfg, size_t num_pads); +/* + * gpio_configure_pads_with_override accepts as input two GPIO tables: + * 1. Base config + * 2. Override config + * + * This function configures raw pads in base config and applies override in + * override config if any. Thus, for every GPIO_x in base config, this function + * looks up the GPIO in override config and if it is present there, then applies + * the configuration from override config. + */ +void gpio_configure_pads_with_override(const struct pad_config *base_cfg, + size_t base_num_pads, + const struct pad_config *override_cfg, + size_t override_num_pads); + /* * Calculate Address of DW0 register for given GPIO */ -- cgit v1.2.3