From 24ab1c5db6a48f27d1541f8f356127a14111358e Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Mon, 25 Nov 2019 11:57:28 +0530 Subject: soc/intel/{apl,cnl,dnv,skl}: Skip ucode loading by FSP-T It is a requirement for Firmware to have Firmware Interface Table (FIT), which contains pointers to each microcode update. The microcode update is loaded for all logical processors before reset vector. FSPT_UPD.MicrocodeRegionBase and FSPT_UPD.MicrocodeRegionLength are input parameters to TempRamInit API. If these values are 0, FSP will not attempt to update microcode. Since Gen-4 all IA-SoC has FIT loading ucode even before cpu reset in place hence skipping FSP-T loading ucode after CPU reset options. Also removed unused kconfig CONFIG_CPU_MICROCODE_CBFS_LOC and CONFIG_CPU_MICROCODE_CBFS_LEN Change-Id: I3a406fa0e2e62e3363c2960e173dc5f5f5ca0455 Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/c/coreboot/+/37187 Reviewed-by: Arthur Heymans Reviewed-by: David Guckian Tested-by: build bot (Jenkins) --- src/soc/intel/cannonlake/bootblock/bootblock.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'src/soc/intel/cannonlake') diff --git a/src/soc/intel/cannonlake/bootblock/bootblock.c b/src/soc/intel/cannonlake/bootblock/bootblock.c index 653ba30563..9f8539766c 100644 --- a/src/soc/intel/cannonlake/bootblock/bootblock.c +++ b/src/soc/intel/cannonlake/bootblock/bootblock.c @@ -30,10 +30,19 @@ const FSPT_UPD temp_ram_init_params = { .Reserved = {0}, }, .FsptCoreUpd = { - .MicrocodeRegionBase = - (uint32_t)CONFIG_CPU_MICROCODE_CBFS_LOC, - .MicrocodeRegionSize = - (uint32_t)CONFIG_CPU_MICROCODE_CBFS_LEN, + /* + * It is a requirement for firmware to have Firmware Interface Table + * (FIT), which contains pointers to each microcode update. + * The microcode update is loaded for all logical processors before + * cpu reset vector. + * + * All SoC since Gen-4 has above mechanism in place to load microcode + * even before hitting CPU reset vector. Hence skipping FSP-T loading + * microcode after CPU reset by passing '0' value to + * FSPT_UPD.MicrocodeRegionBase and FSPT_UPD.MicrocodeRegionLength. + */ + .MicrocodeRegionBase = 0, + .MicrocodeRegionLength = 0, .CodeRegionBase = (uint32_t)(0x100000000ULL - CONFIG_ROM_SIZE), .CodeRegionSize = (uint32_t)CONFIG_ROM_SIZE, -- cgit v1.2.3