From 85d3b40a19358c4014eceaea3204feece8b15edd Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Sat, 15 Jun 2019 16:42:00 -0500 Subject: soc/intel/cannonlake: fix use of legacy 8254 timer FSP sets the use of the 8254 timer via the Enable8254ClockGating UPD, which defaults to enabled, overriding what is set by coreboot. Per the FSP integration guide, this UPD needs to be disabled when a legacy OS is booted (ie, when SeaBIOS is used as the payload). Add a Kconfig option to set the UPD properly based on payload selection, and remove the existing coreboot code in lpc.c since it is either ineffective or being overridden by FSP. Test: build/boot out-of-tree WHL board with both SeaBIOS and Tianocore, ensure 8254 timer usage set correctly for each. Signed-off-by: Matt DeVillier Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/soc/intel/cannonlake/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'src/soc/intel/cannonlake/Kconfig') diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig index 2279df2247..679efce396 100644 --- a/src/soc/intel/cannonlake/Kconfig +++ b/src/soc/intel/cannonlake/Kconfig @@ -314,4 +314,12 @@ config SOC_INTEL_CANNONLAKE_DEBUG_CONSENT Setting non-zero value will allow to use DBC or DCI to debug SOC. PlatformDebugConsent in FspmUpd.h has the details. +config USE_LEGACY_8254_TIMER + bool "Use Legacy 8254 Timer" + default y if PAYLOAD_SEABIOS + default n + help + This sets the Enable8254ClockGating UPD, which according to the FSP Integration + guide needs to be disabled in order to boot SeaBIOS, but should otherwise be enabled. + endif -- cgit v1.2.3