From c200e8c7cdebed98860a771888efbf998c5912b3 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Fri, 23 Oct 2020 21:37:21 +0200 Subject: soc/intel/broadwell: Move PCH code into pch subdir Change-Id: Icb57eb89b4f225298e43ae27970dc1e27fb6e222 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/46706 Reviewed-by: Arthur Heymans Tested-by: build bot (Jenkins) --- src/soc/intel/broadwell/pch/xhci.c | 219 +++++++++++++++++++++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 src/soc/intel/broadwell/pch/xhci.c (limited to 'src/soc/intel/broadwell/pch/xhci.c') diff --git a/src/soc/intel/broadwell/pch/xhci.c b/src/soc/intel/broadwell/pch/xhci.c new file mode 100644 index 0000000000..baaf5ba6e6 --- /dev/null +++ b/src/soc/intel/broadwell/pch/xhci.c @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef __SIMPLE_DEVICE__ +static u8 *usb_xhci_mem_base(pci_devfn_t dev) +{ + u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + + /* Check if the controller is disabled or not present */ + if (mem_base == 0 || mem_base == 0xffffffff) + return 0; + + return (u8 *)(mem_base & ~0xf); +} + +static int usb_xhci_port_count_usb3(pci_devfn_t dev) +{ + /* PCH-LP has 4 SS ports */ + return 4; +} + +static void usb_xhci_reset_status_usb3(u8 *mem_base, int port) +{ + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); + u32 status = read32(portsc); + /* Do not set Port Enabled/Disabled field */ + status &= ~XHCI_USB3_PORTSC_PED; + /* Clear all change status bits */ + status |= XHCI_USB3_PORTSC_CHST; + write32(portsc, status); +} + +static void usb_xhci_reset_port_usb3(u8 *mem_base, int port) +{ + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); + write32(portsc, read32(portsc) | XHCI_USB3_PORTSC_WPR); +} + +#define XHCI_RESET_DELAY_US 1000 /* 1ms */ +#define XHCI_RESET_TIMEOUT 100 /* 100ms */ + +/* + * 1) Wait until port is done polling + * 2) If port is disconnected + * a) Issue warm port reset + * b) Poll for warm reset complete + * c) Write 1 to port change status bits + */ +static void usb_xhci_reset_usb3(pci_devfn_t dev, int all) +{ + u32 status, port_disabled; + int timeout, port; + int port_count = usb_xhci_port_count_usb3(dev); + u8 *mem_base = usb_xhci_mem_base(dev); + + if (!mem_base || !port_count) + return; + + /* Get mask of disabled ports */ + port_disabled = pci_read_config32(dev, XHCI_USB3PDO); + + /* Wait until all enabled ports are done polling */ + for (timeout = XHCI_RESET_TIMEOUT; timeout; timeout--) { + int complete = 1; + for (port = 0; port < port_count; port++) { + /* Skip disabled ports */ + if (port_disabled & (1 << port)) + continue; + /* Read port link status field */ + status = read32(mem_base + XHCI_USB3_PORTSC(port)); + status &= XHCI_USB3_PORTSC_PLS; + if (status == XHCI_PLSR_POLLING) + complete = 0; + } + /* Exit if all ports not polling */ + if (complete) + break; + udelay(XHCI_RESET_DELAY_US); + } + + /* Reset all requested ports */ + for (port = 0; port < port_count; port++) { + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); + /* Skip disabled ports */ + if (port_disabled & (1 << port)) + continue; + status = read32(portsc) & XHCI_USB3_PORTSC_PLS; + /* Reset all or only disconnected ports */ + if (all || (status == XHCI_PLSR_RXDETECT || + status == XHCI_PLSR_POLLING)) + usb_xhci_reset_port_usb3(mem_base, port); + else + port_disabled |= 1 << port; + } + + /* Wait for warm reset complete on all reset ports */ + for (timeout = XHCI_RESET_TIMEOUT; timeout; timeout--) { + int complete = 1; + for (port = 0; port < port_count; port++) { + /* Only check ports that were reset */ + if (port_disabled & (1 << port)) + continue; + /* Check if warm reset is complete */ + status = read32(mem_base + XHCI_USB3_PORTSC(port)); + if (!(status & XHCI_USB3_PORTSC_WRC)) + complete = 0; + } + /* Check for warm reset complete in any port */ + if (complete) + break; + udelay(XHCI_RESET_DELAY_US); + } + + /* Clear port change status bits */ + for (port = 0; port < port_count; port++) + usb_xhci_reset_status_usb3(mem_base, port); +} + +/* Handler for XHCI controller on entry to S3/S4/S5 */ +void usb_xhci_sleep_prepare(pci_devfn_t dev, u8 slp_typ) +{ + u32 reg32; + u8 *mem_base = usb_xhci_mem_base(dev); + u8 is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); + + if (!mem_base || slp_typ < ACPI_S3) + return; + + /* Set D0 state */ + pci_update_config16(dev, XHCI_PWR_CTL_STS, ~XHCI_PWR_CTL_SET_MASK, XHCI_PWR_CTL_SET_D0); + + if (!is_broadwell) { + /* This WA is only for lpt */ + + /* Clear PCI 0xB0[14:13] */ + pci_and_config32(dev, 0xb0, ~((1 << 14) | (1 << 13))); + + /* Clear MMIO 0x816c[14,2] */ + reg32 = read32(mem_base + 0x816c); + reg32 &= ~((1 << 14) | (1 << 2)); + write32(mem_base + 0x816c, reg32); + + /* Reset disconnected USB3 ports */ + usb_xhci_reset_usb3(dev, 0); + + /* Set MMIO 0x80e0[15] */ + reg32 = read32(mem_base + 0x80e0); + reg32 |= (1 << 15); + write32(mem_base + 0x80e0, reg32); + } else { + /* + * Clear port change status bits. Clearing CSC alone seemed to + * fix wakeup from S3 if entering USB compliance state even if + * bit wasn't set on the port. + */ + int port; + for (port = 0; port < usb_xhci_port_count_usb3(dev); port++) + usb_xhci_reset_status_usb3(mem_base, port); + } + + reg32 = read32(mem_base + 0x8154); + reg32 &= ~(1 << 31); + write32(mem_base + 0x8154, reg32); + + /* Set D3Hot state and enable PME */ + pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_SET_D3); + pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_STATUS_PME); + pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_ENABLE_PME); +} +#else /* !__SIMPLE_DEVICE__ */ + +static void xhci_init(struct device *dev) +{ + struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); + u16 reg16; + u32 reg32; + + /* Ensure controller is in D0 state */ + reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS); + reg16 &= ~XHCI_PWR_CTL_SET_MASK; + reg16 |= XHCI_PWR_CTL_SET_D0; + pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16); + + /* Disable Compliance Mode Entry */ + reg32 = read32(res2mmio(res, 0x80ec, 0)); + reg32 |= (1 << 0); + write32(res2mmio(res, 0x80ec, 0), reg32); +} + +static struct device_operations usb_xhci_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .ops_pci = &pci_dev_ops_pci, + .init = xhci_init, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c31, /* LynxPoint-LP */ + 0x9cb1, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_usb_xhci __pci_driver = { + .ops = &usb_xhci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; +#endif /* !__SIMPLE_DEVICE__ */ -- cgit v1.2.3