From c200e8c7cdebed98860a771888efbf998c5912b3 Mon Sep 17 00:00:00 2001
From: Angel Pons <th3fanbus@gmail.com>
Date: Fri, 23 Oct 2020 21:37:21 +0200
Subject: soc/intel/broadwell: Move PCH code into pch subdir

Change-Id: Icb57eb89b4f225298e43ae27970dc1e27fb6e222
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46706
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
 src/soc/intel/broadwell/pch/bootblock.c | 115 ++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 src/soc/intel/broadwell/pch/bootblock.c

(limited to 'src/soc/intel/broadwell/pch/bootblock.c')

diff --git a/src/soc/intel/broadwell/pch/bootblock.c b/src/soc/intel/broadwell/pch/bootblock.c
new file mode 100644
index 0000000000..7f6d0d52d9
--- /dev/null
+++ b/src/soc/intel/broadwell/pch/bootblock.c
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <arch/bootblock.h>
+#include <device/pci_ops.h>
+#include <soc/iomap.h>
+#include <soc/lpc.h>
+#include <soc/pci_devs.h>
+#include <soc/rcba.h>
+#include <soc/spi.h>
+#include <soc/pm.h>
+#include <soc/romstage.h>
+#include <southbridge/intel/common/early_spi.h>
+
+static void map_rcba(void)
+{
+	pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1);
+}
+
+static void enable_port80_on_lpc(void)
+{
+	/* Enable port 80 POST on LPC. The chipset does this by default,
+	 * but it doesn't appear to hurt anything. */
+	u32 gcs = RCBA32(GCS);
+	gcs = gcs & ~0x4;
+	RCBA32(GCS) = gcs;
+}
+
+static void set_spi_speed(void)
+{
+	u32 fdod;
+	u8 ssfc;
+
+	/* Observe SPI Descriptor Component Section 0 */
+	SPIBAR32(SPIBAR_FDOC) = 0x1000;
+
+	/* Extract the Write/Erase SPI Frequency from descriptor */
+	fdod = SPIBAR32(SPIBAR_FDOD);
+	fdod >>= 24;
+	fdod &= 7;
+
+	/* Set Software Sequence frequency to match */
+	ssfc = SPIBAR8(SPIBAR_SSFC + 2);
+	ssfc &= ~7;
+	ssfc |= fdod;
+	SPIBAR8(SPIBAR_SSFC + 2) = ssfc;
+}
+
+static void pch_enable_bars(void)
+{
+	/* Set up southbridge BARs */
+	pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1);
+
+	pci_write_config32(PCH_DEV_LPC, PMBASE, ACPI_BASE_ADDRESS | 1);
+
+	pci_write_config8(PCH_DEV_LPC, ACPI_CNTL, ACPI_EN);
+
+	pci_write_config32(PCH_DEV_LPC, GPIO_BASE, GPIO_BASE_ADDRESS | 1);
+
+	/* Enable GPIO functionality. */
+	pci_write_config8(PCH_DEV_LPC, GPIO_CNTL, GPIO_EN);
+}
+
+static void pch_early_lpc(void)
+{
+	pch_enable_bars();
+
+	/* Set COM1/COM2 decode range */
+	pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, 0x0010);
+
+	/* Enable SuperIO + MC + COM1 + PS/2 Keyboard/Mouse */
+	u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN |
+		COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN;
+	pci_write_config16(PCH_DEV_LPC, LPC_EN, lpc_config);
+
+	/* Enable IOAPIC */
+	RCBA16(OIC) = 0x0100;
+
+	/* Read back for posted write */
+	(void)RCBA16(OIC);
+
+	/* Set HPET address and enable it */
+	RCBA32_AND_OR(HPTC, ~3, 1 << 7);
+
+	/*
+	 * Reading the register back guarantees that the write is
+	 * done before we use the configured base address below.
+	 */
+	(void)RCBA32(HPTC);
+
+	/* Enable HPET to start counter */
+	setbits32((void *)HPET_BASE_ADDRESS + 0x10, 1 << 0);
+
+	/* Disable reset */
+	RCBA32_OR(GCS, 1 << 5);
+
+	/* TCO timer halt */
+	u16 reg16 = inb(ACPI_BASE_ADDRESS + TCO1_CNT);
+	reg16 |= TCO_TMR_HLT;
+	outb(reg16, ACPI_BASE_ADDRESS + TCO1_CNT);
+
+	/* Enable upper 128 bytes of CMOS */
+	RCBA32_OR(RC, 1 << 2);
+
+	/* Disable unused device (always) */
+	RCBA32_OR(FD, PCH_DISABLE_ALWAYS);
+}
+
+void bootblock_early_southbridge_init(void)
+{
+	map_rcba();
+	enable_spi_prefetching_and_caching();
+	enable_port80_on_lpc();
+	set_spi_speed();
+	pch_early_lpc();
+}
-- 
cgit v1.2.3