From bde6d309dfafe58732ec46314a2d4c08974b62d4 Mon Sep 17 00:00:00 2001 From: Kevin Paul Herbert Date: Wed, 24 Dec 2014 18:43:20 -0800 Subject: x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert Signed-off-by: Alexandru Gagniuc Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins) --- src/soc/intel/broadwell/lpc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'src/soc/intel/broadwell/lpc.c') diff --git a/src/soc/intel/broadwell/lpc.c b/src/soc/intel/broadwell/lpc.c index 394a9d7bdd..53cc4b8a24 100644 --- a/src/soc/intel/broadwell/lpc.c +++ b/src/soc/intel/broadwell/lpc.c @@ -53,22 +53,22 @@ static void pch_enable_ioapic(struct device *dev) { u32 reg32; - set_ioapic_id(IO_APIC_ADDR, 0x02); + set_ioapic_id(VIO_APIC_VADDR, 0x02); /* affirm full set of redirection table entries ("write once") */ - reg32 = io_apic_read(IO_APIC_ADDR, 0x01); + reg32 = io_apic_read(VIO_APIC_VADDR, 0x01); /* PCH-LP has 39 redirection entries */ reg32 &= ~0x00ff0000; reg32 |= 0x00270000; - io_apic_write(IO_APIC_ADDR, 0x01, reg32); + io_apic_write(VIO_APIC_VADDR, 0x01, reg32); /* * Select Boot Configuration register (0x03) and * use Processor System Bus (0x01) to deliver interrupts. */ - io_apic_write(IO_APIC_ADDR, 0x03, 0x01); + io_apic_write(VIO_APIC_VADDR, 0x03, 0x01); } /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control -- cgit v1.2.3