From 32471729d9ebbabe809711ec55568925c6ce2070 Mon Sep 17 00:00:00 2001 From: Lee Leahy Date: Mon, 20 Apr 2015 15:20:28 -0700 Subject: Braswell: Add Braswell SOC support Add the files to support the Braswell SOC. BRANCH=none BUG=None TEST=Build for a Braswell platform Change-Id: I968da68733e57647d0a08e4040ff0378b4d59004 Signed-off-by: Lee Leahy Reviewed-on: http://review.coreboot.org/10051 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/soc/intel/braswell/lpe.c | 44 +++++++++++++++++++++++++------------------- 1 file changed, 25 insertions(+), 19 deletions(-) (limited to 'src/soc/intel/braswell/lpe.c') diff --git a/src/soc/intel/braswell/lpe.c b/src/soc/intel/braswell/lpe.c index fdac299e43..fa4b695fd6 100644 --- a/src/soc/intel/braswell/lpe.c +++ b/src/soc/intel/braswell/lpe.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -31,13 +32,15 @@ #include #include #include -#include +#include #include #include "chip.h" -/* The LPE audio devices needs 1MiB of memory reserved aligned to a 512MiB - * address. Just take 1MiB @ 512MiB. */ +/* + * The LPE audio devices needs 1MiB of memory reserved aligned to a 512MiB + * address. Just take 1MiB @ 512MiB. + */ #define FIRMWARE_PHYS_BASE (512 << 20) #define FIRMWARE_PHYS_LENGTH (1 << 20) #define FIRMWARE_PCI_REG_BASE 0xa8 @@ -59,7 +62,8 @@ static void lpe_enable_acpi_mode(device_t dev) static const struct reg_script ops[] = { /* Disable PCI interrupt, enable Memory and Bus Master */ REG_PCI_OR32(PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | (1<<10)), + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_INT_DISABLE), /* Enable ACPI mode */ REG_IOSF_OR(IOSF_PORT_0x58, LPE_PCICFGCTR1, LPE_PCICFGCTR1_PCI_CFG_DIS | @@ -69,7 +73,7 @@ static void lpe_enable_acpi_mode(device_t dev) global_nvs_t *gnvs; /* Find ACPI NVS to update BARs */ - gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS); + gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); if (!gnvs) { printk(BIOS_ERR, "Unable to locate Global NVS\n"); return; @@ -77,7 +81,8 @@ static void lpe_enable_acpi_mode(device_t dev) /* Save BAR0, BAR1, and firmware base to ACPI NVS */ assign_device_nvs(dev, &gnvs->dev.lpe_bar0, PCI_BASE_ADDRESS_0); - assign_device_nvs(dev, &gnvs->dev.lpe_bar1, PCI_BASE_ADDRESS_1); + /* LPE seems does not have BAR at PCI_BASE_ADDRESS_1 so disable it. */ + /* assign_device_nvs(dev, &gnvs->dev.lpe_bar1, PCI_BASE_ADDRESS_1); */ assign_device_nvs(dev, &gnvs->dev.lpe_fw, FIRMWARE_PCI_REG_BASE); /* Device is enabled in ACPI mode */ @@ -91,7 +96,7 @@ static void setup_codec_clock(device_t dev) { uint32_t reg; u32 *clk_reg; - struct soc_intel_baytrail_config *config; + struct soc_intel_braswell_config *config; const char *freq_str; config = dev->chip_info; @@ -119,7 +124,7 @@ static void setup_codec_clock(device_t dev) printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str); - clk_reg = (u32 *)(PMC_BASE_ADDRESS + PLT_CLK_CTL_0); + clk_reg = (u32 *) (PMC_BASE_ADDRESS + PLT_CLK_CTL_0); clk_reg += config->lpe_codec_clk_num; write32(clk_reg, (read32(clk_reg) & ~0x7) | reg); @@ -129,34 +134,35 @@ static void lpe_stash_firmware_info(device_t dev) { struct resource *res; struct resource *mmio; - const struct pattrs *pattrs = pattrs_get(); res = find_resource(dev, FIRMWARE_PCI_REG_BASE); if (res == NULL) { printk(BIOS_DEBUG, "LPE Firmware memory not found.\n"); return; } + printk(BIOS_DEBUG, "LPE FW Resource: 0x%08x\n", (u32) res->base); /* Continue using old way of informing firmware address / size. */ pci_write_config32(dev, FIRMWARE_PCI_REG_BASE, res->base); pci_write_config32(dev, FIRMWARE_PCI_REG_LENGTH, res->size); - /* C0 and later steppings use an offset in the MMIO space. */ - if (pattrs->stepping >= STEP_C0) { - mmio = find_resource(dev, PCI_BASE_ADDRESS_0); - write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0), - res->base); - write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0), - res->size); - } + /* Also put the address in MMIO space like on C0 BTM */ + mmio = find_resource(dev, PCI_BASE_ADDRESS_0); + write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0), \ + res->base); + write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0), \ + res->size); } + static void lpe_init(device_t dev) { - struct soc_intel_baytrail_config *config = dev->chip_info; + struct soc_intel_braswell_config *config = dev->chip_info; - lpe_stash_firmware_info(dev); + printk(BIOS_SPEW, "%s/%s ( %s )\n", + __FILE__, __func__, dev_name(dev)); + lpe_stash_firmware_info(dev); setup_codec_clock(dev); if (config->lpe_acpi_mode) -- cgit v1.2.3