From f6cfbf380488d74f5b420d90d02e59399b83fed9 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Thu, 29 Nov 2018 14:08:15 +0100 Subject: soc/intel/baytrail: Use postcar_frame functions to set up frame Change-Id: I77e375a2ff2fbf1be4ded922195b80b49ffa4cc5 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/29929 Reviewed-by: Matt DeVillier Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) --- src/soc/intel/baytrail/romstage/romstage.c | 83 +++++++----------------------- 1 file changed, 19 insertions(+), 64 deletions(-) (limited to 'src/soc/intel/baytrail/romstage/romstage.c') diff --git a/src/soc/intel/baytrail/romstage/romstage.c b/src/soc/intel/baytrail/romstage/romstage.c index 18c9353d10..dd1fd29c7d 100644 --- a/src/soc/intel/baytrail/romstage/romstage.c +++ b/src/soc/intel/baytrail/romstage/romstage.c @@ -241,76 +241,31 @@ static inline uint32_t *stack_push(u32 *stack, u32 value) return stack; } +#define ROMSTAGE_RAM_STACK_SIZE 0x5000 + /* setup_stack_and_mtrrs() determines the stack to use after * cache-as-ram is torn down as well as the MTRR settings to use. */ static void *setup_stack_and_mtrrs(void) { - int num_mtrrs; - uint32_t *slot; - uint32_t mtrr_mask_upper; - uint32_t top_of_ram; - - /* Top of stack needs to be aligned to a 4-byte boundary. */ - slot = (void *)romstage_ram_stack_top(); - num_mtrrs = 0; - - /* The upper bits of the MTRR mask need to set according to the number - * of physical address bits. */ - mtrr_mask_upper = (1 << ((cpuid_eax(0x80000008) & 0xff) - 32)) - 1; - - /* The order for each MTRR is value then base with upper 32-bits of - * each value coming before the lower 32-bits. The reasoning for - * this ordering is to create a stack layout like the following: - * +0: Number of MTRRs - * +4: MTRR base 0 31:0 - * +8: MTRR base 0 63:32 - * +12: MTRR mask 0 31:0 - * +16: MTRR mask 0 63:32 - * +20: MTRR base 1 31:0 - * +24: MTRR base 1 63:32 - * +28: MTRR mask 1 31:0 - * +32: MTRR mask 1 63:32 - */ + struct postcar_frame pcf; + uintptr_t top_of_ram; + if (postcar_frame_init(&pcf, ROMSTAGE_RAM_STACK_SIZE)) + die("Unable to initialize postcar frame.\n"); /* Cache the ROM as WP just below 4GiB. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_TYPE_WRPROT); - num_mtrrs++; + postcar_frame_add_mtrr(&pcf, CACHE_ROM_BASE, CACHE_ROM_SIZE, + MTRR_TYPE_WRPROT); /* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CACHE_TMP_RAMTOP - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK); - num_mtrrs++; - - top_of_ram = (uint32_t)cbmem_top(); - /* Cache 8MiB below the top of ram. The top of RAM under 4GiB is the - * start of the TSEG region. It is required to be 8MiB aligned. Set - * this area as cacheable so it can be used later for ramstage before - * setting up the entire RAM as cacheable. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK); - num_mtrrs++; - - /* Cache 8MiB at the top of ram. Top of RAM is where the TSEG - * region resides. However, it is not restricted to SMM mode until - * SMM has been relocated. By setting the region to cacheable it - * provides faster access when relocating the SMM handler as well - * as using the TSEG region for other purposes. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK); - num_mtrrs++; - - /* Save the number of MTRRs to setup. Return the stack location - * pointing to the number of MTRRs. */ - slot = stack_push(slot, num_mtrrs); - - return slot; + postcar_frame_add_mtrr(&pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK); + + /* Cache at least 8 MiB below the top of ram, and at most 8 MiB + * above top of the ram. This satisfies MTRR alignment requirement + * with different TSEG size configurations. + */ + top_of_ram = ALIGN_DOWN((uintptr_t)cbmem_top(), 8*MiB); + postcar_frame_add_mtrr(&pcf, top_of_ram - 8*MiB, 16*MiB, + MTRR_TYPE_WRBACK); + + return postcar_commit_mtrrs(&pcf); } -- cgit v1.2.3