From 3406dd64c328bf0f2f1902d42b239f84c136e4f0 Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Fri, 4 Aug 2017 15:58:26 -0700 Subject: soc/intel/common/uart: Refactor uart_common_init 1. Create a new function uart_lpss_init which takes the UART LPSS controller out of reset and initializes and enables clock. 2. Instead of passing in m/n clock divider values as parameters to uart_common_init, introduce Kconfig variables so that uart_lpss_init can use the values directly without having to query the SoC. BUG=b:64030366 TEST=Verified that UART still works on APL and KBL boards. Change-Id: I74d01b0037d8c38fe6480c38ff2283d76097282a Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/20884 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/soc/intel/apollolake/Kconfig | 10 ++++++++++ src/soc/intel/apollolake/include/soc/uart.h | 7 ------- src/soc/intel/apollolake/uart_early.c | 2 +- 3 files changed, 11 insertions(+), 8 deletions(-) (limited to 'src/soc/intel/apollolake') diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig index cc516f32ad..1323f573d1 100644 --- a/src/soc/intel/apollolake/Kconfig +++ b/src/soc/intel/apollolake/Kconfig @@ -351,4 +351,14 @@ config APL_SKIP_SET_POWER_LIMITS Limits (RAPL) algorithm for a constant power management. Set this config option to skip the RAPL configuration. +# M and N divisor values for clock frequency configuration. +# These values get us a 1.836 MHz clock (ideally we want 1.843 MHz) +config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL + hex + default 0x25a + +config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL + hex + default 0x7fff + endif diff --git a/src/soc/intel/apollolake/include/soc/uart.h b/src/soc/intel/apollolake/include/soc/uart.h index b2b1bb8623..bf8b9d74e3 100644 --- a/src/soc/intel/apollolake/include/soc/uart.h +++ b/src/soc/intel/apollolake/include/soc/uart.h @@ -18,13 +18,6 @@ #ifndef _SOC_APOLLOLAKE_UART_H_ #define _SOC_APOLLOLAKE_UART_H_ -/* -* M and N divisor values for clock frequency configuration. -* These values get us a 1.836 MHz clock (ideally we want 1.843 MHz) -*/ -#define CLK_M_VAL 0x025a -#define CLK_N_VAL 0x7fff - /* Initialize the console UART including the pads for the configured UART. */ void pch_uart_init(void); diff --git a/src/soc/intel/apollolake/uart_early.c b/src/soc/intel/apollolake/uart_early.c index 4c143ad854..d3c1b0d0ca 100644 --- a/src/soc/intel/apollolake/uart_early.c +++ b/src/soc/intel/apollolake/uart_early.c @@ -69,6 +69,6 @@ void pch_uart_init(void) gpio_configure_pads(&uart_gpios[pad_index * 2], 2); /* Program UART2 BAR0, command, reset and clock register */ - uart_common_init(uart, base, CLK_M_VAL, CLK_N_VAL); + uart_common_init(uart, base); } -- cgit v1.2.3