From aab8bb2bdfb1ca87df570e31791f6e4f6e3cc916 Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Mon, 21 Sep 2020 16:03:43 +0530 Subject: soc/intel/alderlake: Add GPIOs for Alder Lake SOC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for the GPIO pins on Alder Lake LP, as well as GPIO IRQ routing information and supporting ACPI ASL. For now, add the following 5 GPIO communities and 13 GPIO groups: Comm. 0: GPP_B, GPP_T, GPP_A Comm. 1: GPP_S, GPP_H, GPP_D Comm. 2: GPD Comm. 4: GPP_C, GPP_F, GPP_E, GPP_HVMOS Comm. 5: GPP_R, GPP_SPI0 Change-Id: I77b9dcc46aceaf530e2054c9cacd7b026ebbb96b Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/c/coreboot/+/45571 Tested-by: build bot (Jenkins) Reviewed-by: Michael Niewöhner --- src/soc/intel/alderlake/gpio.c | 188 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100644 src/soc/intel/alderlake/gpio.c (limited to 'src/soc/intel/alderlake/gpio.c') diff --git a/src/soc/intel/alderlake/gpio.c b/src/soc/intel/alderlake/gpio.c new file mode 100644 index 0000000000..f0db5e996b --- /dev/null +++ b/src/soc/intel/alderlake/gpio.c @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include +#include +#include +#include + +/* + * This file is created based on Intel Alder Lake Processor PCH Datasheet + * Document number: 630094 + * Chapter number: 27 + */ + +static const struct reset_mapping rst_map[] = { + { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 0U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, +}; +static const struct reset_mapping rst_map_com2[] = { + { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 3U << 30 }, +}; + +/* + * The GPIO pinctrl driver for Alder Lake on Linux expects 32 GPIOs per pad + * group, regardless of whether or not there is a physical pad for each + * exposed GPIO number. + * + * This results in the OS having a sparse GPIO map, and devices that need + * to export an ACPI GPIO must use the OS expected number. + * + * Not all pins are usable as GPIO and those groups do not have a pad base. + */ +static const struct pad_group adl_community0_groups[] = { + INTEL_GPP_BASE(GPP_B0, GPP_B0, GPP_B25, 0), /* GPP_B */ + INTEL_GPP_BASE(GPP_B0, GPP_T0, GPP_T15, 32), /* GPP_T */ + INTEL_GPP_BASE(GPP_B0, GPP_A0, GPP_ESPI_CLK_LOOPBK, 64), /* GPP_A */ +}; + +static const struct pad_group adl_community1_groups[] = { + INTEL_GPP_BASE(GPP_S0, GPP_S0, GPP_S7, 96), /* GPP_S */ + INTEL_GPP_BASE(GPP_S0, GPP_H0, GPP_H23, 128), /* GPP_H */ + INTEL_GPP_BASE(GPP_S0, GPP_D0, GPP_GSPI2_CLK_LOOPBK, 160), /* GPP_D */ +}; + +/* This community is not visible to the OS */ +static const struct pad_group adl_community2_groups[] = { + INTEL_GPP(GPD0, GPD0, GPD_DRAM_RESETB), /* GPD */ +}; + +static const struct pad_group adl_community4_groups[] = { + INTEL_GPP_BASE(GPP_C0, GPP_C0, GPP_C23, 256), /* GPP_C */ + INTEL_GPP_BASE(GPP_C0, GPP_F0, GPP_F_CLK_LOOPBK, 288), /* GPP_F */ + INTEL_GPP(GPP_C0, GPP_L_BKLTEN, GPP_MLK_RSTB), /* GPP_HVMOS */ + INTEL_GPP_BASE(GPP_C0, GPP_E0, GPP_E_CLK_LOOPBK, 320), /* GPP_E */ +}; + +static const struct pad_group adl_community5_groups[] = { + INTEL_GPP_BASE(GPP_R0, GPP_R0, GPP_R7, 352), /* GPP_R */ + INTEL_GPP(GPP_R0, GPP_SPI0_IO_2, GPP_SPI0_CLK), /* GPP_SPI0 */ +}; + +static const struct pad_community adl_communities[] = { + [COMM_0] = { /* GPP B, T, A */ + .port = PID_GPIOCOM0, + .first_pad = GPIO_COM0_START, + .last_pad = GPIO_COM0_END, + .num_gpi_regs = NUM_GPIO_COM0_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_BTA", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = adl_community0_groups, + .num_groups = ARRAY_SIZE(adl_community0_groups), + }, + [COMM_1] = { /* GPP S, D, H */ + .port = PID_GPIOCOM1, + .first_pad = GPIO_COM1_START, + .last_pad = GPIO_COM1_END, + .num_gpi_regs = NUM_GPIO_COM1_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_SDH", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = adl_community1_groups, + .num_groups = ARRAY_SIZE(adl_community1_groups), + }, + [COMM_2] = { /* GPD */ + .port = PID_GPIOCOM2, + .first_pad = GPIO_COM2_START, + .last_pad = GPIO_COM2_END, + .num_gpi_regs = NUM_GPIO_COM2_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPD", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map_com2, + .num_reset_vals = ARRAY_SIZE(rst_map_com2), + .groups = adl_community2_groups, + .num_groups = ARRAY_SIZE(adl_community2_groups), + }, + [COMM_4] = { /* GPP F, C, HVMOS, E */ + .port = PID_GPIOCOM4, + .first_pad = GPIO_COM4_START, + .last_pad = GPIO_COM4_END, + .num_gpi_regs = NUM_GPIO_COM4_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_FCE", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = adl_community4_groups, + .num_groups = ARRAY_SIZE(adl_community4_groups), + }, + [COMM_5] = { /* GPP R, SPI0 */ + .port = PID_GPIOCOM5, + .first_pad = GPIO_COM5_START, + .last_pad = GPIO_COM5_END, + .num_gpi_regs = NUM_GPIO_COM5_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPP_RSPI0", + .acpi_path = "\\_SB.PCI0.GPIO", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = adl_community5_groups, + .num_groups = ARRAY_SIZE(adl_community5_groups), + } +}; + +const struct pad_community *soc_gpio_get_community(size_t *num_communities) +{ + *num_communities = ARRAY_SIZE(adl_communities); + return adl_communities; +} + +const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num) +{ + static const struct pmc_to_gpio_route routes[] = { + { PMC_GPP_B, GPP_B }, + { PMC_GPP_T, GPP_T }, + { PMC_GPP_A, GPP_A }, + { PMC_GPP_S, GPP_S }, + { PMC_GPP_H, GPP_H }, + { PMC_GPP_D, GPP_D }, + { PMC_GPD, GPD }, + { PMC_GPP_C, GPP_C }, + { PMC_GPP_F, GPP_F }, + { PMC_GPP_HVMOS, GPP_HVMOS }, + { PMC_GPP_E, GPP_E }, + { PMC_GPP_R, GPP_R }, + { PMC_GPP_SPI0, GPP_SPI0 }, + }; + *num = ARRAY_SIZE(routes); + return routes; +} -- cgit v1.2.3