From b3ced6a67b6f950d06bebf413d98218969b75b57 Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Tue, 4 Aug 2020 13:34:03 +0530 Subject: soc/intel/alderlake/bootblock: Do initial SoC commit till bootblock List of changes: 1. Add required SoC programming till bootblock 2. Include only required headers into include/soc 3. Add CPU/PCH/SA EDS document number and chapter number 4. Include ADL-P related DID, BDF Signed-off-by: Subrata Banik Change-Id: I204e692fabb84fce297bebee465f4ca624c6fe56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44857 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- src/soc/intel/alderlake/Kconfig | 132 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 src/soc/intel/alderlake/Kconfig (limited to 'src/soc/intel/alderlake/Kconfig') diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig new file mode 100644 index 0000000000..ee1e871ebb --- /dev/null +++ b/src/soc/intel/alderlake/Kconfig @@ -0,0 +1,132 @@ +config SOC_INTEL_ALDERLAKE + bool + help + Intel Alderlake support + +if SOC_INTEL_ALDERLAKE + +config CPU_SPECIFIC_OPTIONS + def_bool y + select ARCH_BOOTBLOCK_X86_32 + select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH + select BOOT_DEVICE_SUPPORTS_WRITES + select INTEL_DESCRIPTOR_MODE_CAPABLE + select IDT_IN_EVERY_STAGE + select INTEL_CAR_NEM #TODO - Enable INTEL_CAR_NEM_ENHANCED + select MICROCODE_BLOB_UNDISCLOSED + select SOC_INTEL_COMMON + select SOC_INTEL_COMMON_BLOCK + select SOC_INTEL_COMMON_BLOCK_CPU + select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 + select SOC_INTEL_COMMON_BLOCK_SA + select SOC_INTEL_COMMON_PCH_BASE + select SOC_INTEL_COMMON_RESET + select SOC_INTEL_COMMON_BLOCK_CAR + select SSE2 + select SUPPORT_CPU_UCODE_IN_CBFS + select TSC_MONOTONIC_TIMER + select UDELAY_TSC + +config DCACHE_RAM_BASE + default 0xfef00000 + +config DCACHE_RAM_SIZE + default 0x80000 + help + The size of the cache-as-ram region required during bootblock + and/or romstage. + +config DCACHE_BSP_STACK_SIZE + hex + default 0x40400 + help + The amount of anticipated stack usage in CAR by bootblock and + other stages. In the case of FSP_USES_CB_STACK default value will be + sum of FSP-M stack requirement(256KiB) and CB romstage stack requirement + (~1KiB). + +config FSP_TEMP_RAM_SIZE + hex + default 0x20000 + help + The amount of anticipated heap usage in CAR by FSP. + Refer to Platform FSP integration guide document to know + the exact FSP requirement for Heap setup. + +config IFD_CHIPSET + string + default "adl" + +config IED_REGION_SIZE + hex + default 0x400000 + +config HEAP_SIZE + hex + default 0x10000 + +config PCR_BASE_ADDRESS + hex + default 0xfd000000 + help + This option allows you to select MMIO Base Address of sideband bus. + +config MMCONF_BASE_ADDRESS + hex + default 0xc0000000 + +config CPU_BCLK_MHZ + int + default 100 + +config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ + int + default 120 + +config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ + int + default 133 + +config SOC_INTEL_COMMON_BLOCK_GSPI_MAX + int + default 7 + +config SOC_INTEL_I2C_DEV_MAX + int + default 6 + +config SOC_INTEL_UART_DEV_MAX + int + default 7 + +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xfe032000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + +# Clock divider parameters for 115200 baud rate +# Baudrate = (UART source clcok * M) /(N *16) +# ADL UART source clock: 120MHz +config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL + hex + default 0x25a + +config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL + hex + default 0x7fff + +config CHROMEOS + select CHROMEOS_RAMOOPS_DYNAMIC + +config C_ENV_BOOTBLOCK_SIZE + hex + default 0xC000 + +config CBFS_SIZE + hex + default 0x200000 + +config PRERAM_CBMEM_CONSOLE_SIZE + hex + default 0x1400 +endif -- cgit v1.2.3