From 8336c72524a975564baccc1bf68d65dcfed61597 Mon Sep 17 00:00:00 2001 From: Felix Held Date: Fri, 14 Jul 2023 18:41:23 +0200 Subject: soc/amd/glinda/early_fch: don't call enable_acpimmio_decode_pm04 The enable_acpimmio_decode_pm04 function uses the IO port based indirect access of the PM register space. The PM_INDEX and PM_DATA registers don't exist any more on Glinda, so the code shouldn't access those. Since the PM_04_ACPIMMIO_DECODE_EN bit in the ACPIMMIO_DECODE_REGISTER_04 register is 1 after reset, the ACPIMMIO space is still accessible. Signed-off-by: Felix Held Change-Id: Ic6bc0479ea4ea2b9fe3629a6e15940b31b2864d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76456 Tested-by: build bot (Jenkins) Reviewed-by: Elyes Haouas --- src/soc/amd/glinda/early_fch.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'src/soc/amd') diff --git a/src/soc/amd/glinda/early_fch.c b/src/soc/amd/glinda/early_fch.c index f504f79176..1d629a7ae0 100644 --- a/src/soc/amd/glinda/early_fch.c +++ b/src/soc/amd/glinda/early_fch.c @@ -19,9 +19,12 @@ /* Before console init */ void fch_pre_init(void) { - /* Enable_acpimmio_decode_pm04 to enable the ACPIMMIO decode which is needed to access - the GPIO registers. */ - enable_acpimmio_decode_pm04(); + /* + * PM_04_ACPIMMIO_DECODE_EN which enables the ACPIMMIO decode is already set after + * reset. Since the IO port based indirect PM register space access isn't implemented + * in Phoenix any more, don't call enable_acpimmio_decode_pm04() which uses the + * indirect PM register space access via the IO ports that aren't implemented any more. + */ /* Setup SPI base by calling lpc_early_init before setting up eSPI. */ lpc_early_init(); -- cgit v1.2.3