From 244848462def7075e0c812a2f71c408668cacfe4 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Thu, 4 May 2017 21:17:45 -0600 Subject: soc: Add AMD Stoney Ridge southbridge code Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/soc/amd/common/Kconfig | 4 + src/soc/amd/common/Makefile.inc | 5 + src/soc/amd/common/amd_defs.h | 22 + src/soc/amd/common/amd_pci_util.c | 200 +++++++++ src/soc/amd/common/amd_pci_util.h | 41 ++ src/soc/amd/stoneyridge/Kconfig | 167 ++++++++ src/soc/amd/stoneyridge/Makefile.inc | 236 +++++++++++ src/soc/amd/stoneyridge/acpi/fch.asl | 184 ++++++++ src/soc/amd/stoneyridge/acpi/lpc.asl | 103 +++++ src/soc/amd/stoneyridge/acpi/pci_int.asl | 469 +++++++++++++++++++++ src/soc/amd/stoneyridge/acpi/pcie.asl | 99 +++++ src/soc/amd/stoneyridge/acpi/sleepstates.asl | 38 ++ src/soc/amd/stoneyridge/acpi/smbus.asl | 0 src/soc/amd/stoneyridge/acpi/usb.asl | 65 +++ src/soc/amd/stoneyridge/bootblock/bootblock.c | 63 +++ src/soc/amd/stoneyridge/chip.c | 60 +++ src/soc/amd/stoneyridge/chip.h | 33 ++ src/soc/amd/stoneyridge/early_setup.c | 334 +++++++++++++++ src/soc/amd/stoneyridge/enable_usbdebug.c | 59 +++ src/soc/amd/stoneyridge/fadt.c | 207 +++++++++ src/soc/amd/stoneyridge/gpio.c | 28 ++ src/soc/amd/stoneyridge/hda.c | 52 +++ src/soc/amd/stoneyridge/hudson.c | 132 ++++++ src/soc/amd/stoneyridge/ide.c | 44 ++ src/soc/amd/stoneyridge/imc.c | 101 +++++ src/soc/amd/stoneyridge/include/amd_pci_int_defs.h | 75 ++++ .../amd/stoneyridge/include/amd_pci_int_types.h | 32 ++ src/soc/amd/stoneyridge/include/soc/gpio.h | 131 ++++++ src/soc/amd/stoneyridge/include/soc/hudson.h | 198 +++++++++ src/soc/amd/stoneyridge/include/soc/imc.h | 27 ++ src/soc/amd/stoneyridge/include/soc/pci_devs.h | 122 ++++++ src/soc/amd/stoneyridge/include/soc/smbus.h | 70 +++ src/soc/amd/stoneyridge/include/soc/smi.h | 65 +++ src/soc/amd/stoneyridge/lpc.c | 366 ++++++++++++++++ src/soc/amd/stoneyridge/pci.c | 67 +++ src/soc/amd/stoneyridge/pcie.c | 61 +++ src/soc/amd/stoneyridge/reset.c | 45 ++ src/soc/amd/stoneyridge/sata.c | 81 ++++ src/soc/amd/stoneyridge/sd.c | 65 +++ src/soc/amd/stoneyridge/sm.c | 135 ++++++ src/soc/amd/stoneyridge/smbus.c | 246 +++++++++++ src/soc/amd/stoneyridge/smbus_spd.c | 148 +++++++ src/soc/amd/stoneyridge/smi.c | 26 ++ src/soc/amd/stoneyridge/smi_util.c | 78 ++++ src/soc/amd/stoneyridge/smihandler.c | 136 ++++++ src/soc/amd/stoneyridge/uart.c | 26 ++ src/soc/amd/stoneyridge/usb.c | 56 +++ 47 files changed, 5002 insertions(+) create mode 100644 src/soc/amd/common/Kconfig create mode 100644 src/soc/amd/common/Makefile.inc create mode 100644 src/soc/amd/common/amd_defs.h create mode 100644 src/soc/amd/common/amd_pci_util.c create mode 100644 src/soc/amd/common/amd_pci_util.h create mode 100644 src/soc/amd/stoneyridge/Kconfig create mode 100644 src/soc/amd/stoneyridge/Makefile.inc create mode 100644 src/soc/amd/stoneyridge/acpi/fch.asl create mode 100644 src/soc/amd/stoneyridge/acpi/lpc.asl create mode 100644 src/soc/amd/stoneyridge/acpi/pci_int.asl create mode 100644 src/soc/amd/stoneyridge/acpi/pcie.asl create mode 100644 src/soc/amd/stoneyridge/acpi/sleepstates.asl create mode 100644 src/soc/amd/stoneyridge/acpi/smbus.asl create mode 100644 src/soc/amd/stoneyridge/acpi/usb.asl create mode 100644 src/soc/amd/stoneyridge/bootblock/bootblock.c create mode 100644 src/soc/amd/stoneyridge/chip.c create mode 100644 src/soc/amd/stoneyridge/chip.h create mode 100644 src/soc/amd/stoneyridge/early_setup.c create mode 100644 src/soc/amd/stoneyridge/enable_usbdebug.c create mode 100644 src/soc/amd/stoneyridge/fadt.c create mode 100644 src/soc/amd/stoneyridge/gpio.c create mode 100644 src/soc/amd/stoneyridge/hda.c create mode 100644 src/soc/amd/stoneyridge/hudson.c create mode 100644 src/soc/amd/stoneyridge/ide.c create mode 100644 src/soc/amd/stoneyridge/imc.c create mode 100644 src/soc/amd/stoneyridge/include/amd_pci_int_defs.h create mode 100644 src/soc/amd/stoneyridge/include/amd_pci_int_types.h create mode 100644 src/soc/amd/stoneyridge/include/soc/gpio.h create mode 100644 src/soc/amd/stoneyridge/include/soc/hudson.h create mode 100644 src/soc/amd/stoneyridge/include/soc/imc.h create mode 100644 src/soc/amd/stoneyridge/include/soc/pci_devs.h create mode 100644 src/soc/amd/stoneyridge/include/soc/smbus.h create mode 100644 src/soc/amd/stoneyridge/include/soc/smi.h create mode 100644 src/soc/amd/stoneyridge/lpc.c create mode 100644 src/soc/amd/stoneyridge/pci.c create mode 100644 src/soc/amd/stoneyridge/pcie.c create mode 100644 src/soc/amd/stoneyridge/reset.c create mode 100644 src/soc/amd/stoneyridge/sata.c create mode 100644 src/soc/amd/stoneyridge/sd.c create mode 100644 src/soc/amd/stoneyridge/sm.c create mode 100644 src/soc/amd/stoneyridge/smbus.c create mode 100644 src/soc/amd/stoneyridge/smbus_spd.c create mode 100644 src/soc/amd/stoneyridge/smi.c create mode 100644 src/soc/amd/stoneyridge/smi_util.c create mode 100644 src/soc/amd/stoneyridge/smihandler.c create mode 100644 src/soc/amd/stoneyridge/uart.c create mode 100644 src/soc/amd/stoneyridge/usb.c (limited to 'src/soc/amd') diff --git a/src/soc/amd/common/Kconfig b/src/soc/amd/common/Kconfig new file mode 100644 index 0000000000..fac3f43565 --- /dev/null +++ b/src/soc/amd/common/Kconfig @@ -0,0 +1,4 @@ +config SOC_AMD_COMMON + bool + help + common code for AMD SOCs diff --git a/src/soc/amd/common/Makefile.inc b/src/soc/amd/common/Makefile.inc new file mode 100644 index 0000000000..689065bd5a --- /dev/null +++ b/src/soc/amd/common/Makefile.inc @@ -0,0 +1,5 @@ +ifeq ($(CONFIG_SOC_AMD_COMMON),y) + +ramstage-y += amd_pci_util.c + +endif diff --git a/src/soc/amd/common/amd_defs.h b/src/soc/amd/common/amd_defs.h new file mode 100644 index 0000000000..55db30f409 --- /dev/null +++ b/src/soc/amd/common/amd_defs.h @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Raptor Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#ifndef _AMD_SB_DEFS_H_ +#define _AMD_SB_DEFS_H_ + +#define AMD_SB_ACPI_MMIO_ADDR 0xfed80000ul + +#endif diff --git a/src/soc/amd/common/amd_pci_util.c b/src/soc/amd/common/amd_pci_util.c new file mode 100644 index 0000000000..19665412fa --- /dev/null +++ b/src/soc/amd/common/amd_pci_util.c @@ -0,0 +1,200 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifndef __PRE_RAM__ + +const struct pirq_struct * pirq_data_ptr = NULL; +u32 pirq_data_size = 0; +const u8 * intr_data_ptr = NULL; +const u8 * picr_data_ptr = NULL; + +/* + * Read the FCH PCI_INTR registers 0xC00/0xC01 at a + * given index and a given PIC (0) or IOAPIC (1) mode + */ +u8 read_pci_int_idx(u8 index, int mode) +{ + outb((mode << 7) | index, PCI_INTR_INDEX); + return inb(PCI_INTR_DATA); +} + +/* + * Write a value to the FCH PCI_INTR registers 0xC00/0xC01 + * at a given index and PIC (0) or IOAPIC (1) mode + */ +void write_pci_int_idx(u8 index, int mode, u8 data) +{ + outb((mode << 7) | index, PCI_INTR_INDEX); + outb(data, PCI_INTR_DATA); +} + +/* + * Write the FCH PCI_INTR registers 0xC00/0xC01 with values + * given in global variables intr_data and picr_data. + * These variables are defined in mainboard.c + */ +void write_pci_int_table (void) +{ + u8 byte; + + if (picr_data_ptr == NULL || intr_data_ptr == NULL){ + printk(BIOS_ERR, "Warning: Can't write PCI_INTR 0xC00/0xC01 registers because\n" + "'mainboard_picr_data' or 'mainboard_intr_data' tables are NULL\n"); + return; + } + + /* PIC IRQ routine */ + printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing:\n" + "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n"); + for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) { + if (intr_types[byte]) { + write_pci_int_idx(byte, 0, (u8) picr_data_ptr[byte]); + printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n", + byte, intr_types[byte], read_pci_int_idx(byte, 0)); + } + } + + /* APIC IRQ routine */ + printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing:\n" + "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n"); + for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) { + if (intr_types[byte]) { + write_pci_int_idx(byte, 1, (u8) intr_data_ptr[byte]); + printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n", + byte, intr_types[byte], read_pci_int_idx(byte, 1)); + } + } +} + +/* + * Function to write the PCI config space Interrupt + * registers based on the values given in PCI_INTR + * table at I/O port 0xC00/0xC01 + */ +void write_pci_cfg_irqs(void) +{ + device_t dev = NULL; /* Our current device to route IRQs to */ + device_t target_dev = NULL; /* The bridge that a device may be connected to */ + u16 int_pin = 0; /* Value of the INT_PIN register 0x3D */ + u16 target_pin = 0; /* Pin we will search our tables for */ + u16 int_line = 0; /* IRQ number read from PCI_INTR table and programmed to INT_LINE reg 0x3C */ + u16 pci_intr_idx = 0; /* Index into PCI_INTR table, 0xC00/0xC01 */ + u8 bus = 0; /* A PCI Device Bus number */ + u16 devfn = 0; /* A PCI Device and Function number */ + u8 bridged_device = 0; /* This device is on a PCI bridge */ + u32 i = 0; + + if (pirq_data_ptr == NULL) { + printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because" + " 'mainboard_pirq_data' structure does not exist\n"); + return; + } + + /* Populate the PCI cfg space header with the IRQ assignment */ + printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n"); + + for (dev = all_devices; dev; dev = dev->next) { + /* + * Step 1: Get the INT_PIN and device structure to look for in the + * PCI_INTR table pirq_data + */ + target_dev = NULL; + target_pin = get_pci_irq_pins(dev, &target_dev); + if (target_dev == NULL) + continue; + + if (target_pin < 1) + continue; + + /* Get the original INT_PIN for record keeping */ + int_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN); + if (int_pin < 1 || int_pin > 4) + continue; /* Device has invalid INT_PIN so skip it */ + + bus = target_dev->bus->secondary; + devfn = target_dev->path.pci.devfn; + + /* + * Step 2: Use the INT_PIN and DevFn number to find the PCI_INTR + * register (0xC00) index for this device + */ + pci_intr_idx = 0xBAD; /* Will check to make sure it changed */ + for (i = 0; i < pirq_data_size; i++) { + if (pirq_data_ptr[i].devfn != devfn) + continue; + + /* PIN_A is index 0 in pirq_data array but 1 in PCI cfg reg */ + pci_intr_idx = pirq_data_ptr[i].PIN[target_pin - 1]; + printk(BIOS_SPEW, "\tFound this device in pirq_data table entry %d\n", i); + break; + } + + /* + * Step 3: Make sure we got a valid index and use it to get + * the IRQ number from the PCI_INTR register table + */ + if (pci_intr_idx == 0xBAD) { /* Not on a bridge or in pirq_data table, skip it */ + printk(BIOS_SPEW, "PCI Devfn (0x%x) not found in pirq_data table\n", devfn); + continue; + } else if (pci_intr_idx == 0x1F) { /* Index found is not defined */ + printk(BIOS_SPEW, "Got index 0x1F (Not Connected), perhaps this device was defined wrong?\n"); + continue; + } else if (pci_intr_idx >= FCH_INT_TABLE_SIZE) { /* Index out of bounds */ + printk(BIOS_ERR, "%s: got 0xC00/0xC01 table index 0x%x, max is 0x%x\n", + __func__, pci_intr_idx, FCH_INT_TABLE_SIZE); + continue; + } + + /* Find the value to program into the INT_LINE register from the PCI_INTR registers */ + int_line = read_pci_int_idx(pci_intr_idx, 0); + if (int_line == PIRQ_NC) { /* The IRQ found is disabled */ + printk(BIOS_SPEW, "Got IRQ 0x1F (disabled), perhaps this device was defined wrong?\n"); + continue; + } + + /* + * Step 4: Program the INT_LINE register in this device's + * PCI config space with the IRQ number we found in step 3 + * and make it Level Triggered + */ + pci_write_config8(dev, PCI_INTERRUPT_LINE, int_line); + + /* Set this IRQ to level triggered since it is used by a PCI device */ + i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED); + + /* + * Step 5: Print out debug info and move on to next device + */ + printk(BIOS_SPEW, "\tOrig INT_PIN\t: %d (%s)\n", + int_pin, pin_to_str(int_pin)); + if (bridged_device) + printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n", + target_pin, pin_to_str(target_pin)); + printk(BIOS_SPEW, "\tPCI_INTR idx\t: 0x%02x (%s)\n" + "\tINT_LINE\t: 0x%X (IRQ %d)\n", + pci_intr_idx, intr_types[pci_intr_idx], int_line, int_line); + } /* for (dev = all_devices) */ + printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n"); +} +#endif /* __PRE_RAM__ */ diff --git a/src/soc/amd/common/amd_pci_util.h b/src/soc/amd/common/amd_pci_util.h new file mode 100644 index 0000000000..fd5f077af3 --- /dev/null +++ b/src/soc/amd/common/amd_pci_util.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AMD_PCI_UTIL_H +#define AMD_PCI_UTIL_H + +#include +#include + +/* FCH index/data registers */ +#define PCI_INTR_INDEX 0xc00 +#define PCI_INTR_DATA 0xc01 + +struct pirq_struct { + u8 devfn; + u8 PIN[4]; /* PINA/B/C/D are index 0/1/2/3 */ +}; + +extern const struct pirq_struct * pirq_data_ptr; +extern u32 pirq_data_size; +extern const u8 * intr_data_ptr; +extern const u8 * picr_data_ptr; + +u8 read_pci_int_idx(u8 index, int mode); +void write_pci_int_idx(u8 index, int mode, u8 data); +void write_pci_cfg_irqs(void); +void write_pci_int_table (void); + +#endif /* AMD_PCI_UTIL_H */ diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig new file mode 100644 index 0000000000..4cd3116ecd --- /dev/null +++ b/src/soc/amd/stoneyridge/Kconfig @@ -0,0 +1,167 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2017 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +config SOC_AMD_STONEYRIDGE + bool + select IOAPIC + select HAVE_USBDEBUG_OPTIONS + select HAVE_HARD_RESET + select SOC_AMD_COMMON + +if SOC_AMD_STONEYRIDGE + +config BOOTBLOCK_SOUTHBRIDGE_INIT + string + default "soc/amd/stoneyridge/bootblock/bootblock.c" + +config SOUTHBRIDGE_AMD_STONEYRIDGE_SKIP_ISA_DMA_INIT + bool + default n + +config EHCI_BAR + hex + default 0xfef00000 + +config STONEYRIDGE_XHCI_ENABLE + bool "Enable Stoney Ridge XHCI Controller" + default y + help + The XHCI controller must be enabled and the XHCI firmware + must be added in order to have USB 3.0 support configured + by coreboot. The OS will be responsible for enabling the XHCI + controller if the the XHCI firmware is available but the + XHCI controller is not enabled by coreboot. + +config STONEYRIDGE_XHCI_FWM + bool "Add xhci firmware" + default y + help + Add Stoney Ridge XHCI Firmware to support the onboard USB 3.0 + +config STONEYRIDGE_IMC_FWM + bool "Add IMC firmware" + default n + help + Add Stoney Ridge IMC Firmware to support the onboard fan control + +config STONEYRIDGE_GEC_FWM + bool + default n + help + Add Stoney Ridge GEC Firmware to support the onboard gigabit Ethernet MAC. + Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard. + +config STONEYRIDGE_XHCI_FWM_FILE + string "XHCI firmware path and filename" + default "3rdparty/blobs/southbridge/amd/kern/xhci.bin" + depends on STONEYRIDGE_XHCI_FWM + +config STONEYRIDGE_IMC_FWM_FILE + string "IMC firmware path and filename" + default "3rdparty/blobs/southbridge/amd/kern/imc.bin" + depends on STONEYRIDGE_IMC_FWM + +config STONEYRIDGE_GEC_FWM_FILE + string "GEC firmware path and filename" + depends on STONEYRIDGE_GEC_FWM + +config AMD_PUBKEY_FILE + string "AMD public Key" + default "3rdparty/blobs/southbridge/amd/kern/PSP/AmdPubKeyST.bin" + +config STONEYRIDGE_SATA_MODE + int "SATA Mode" + default 0 + range 0 6 + help + Select the mode in which SATA should be driven. + The default is NATIVE. + 0: NATIVE mode does not require a ROM. + 2: AHCI may work with or without AHCI ROM. It depends on the payload support. + For example, seabios does not require the AHCI ROM. + 3: LEGACY IDE + 4: IDE to AHCI + 5: AHCI7804: ROM Required, and AMD driver required in the OS. + 6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS. + +comment "NATIVE" + depends on STONEYRIDGE_SATA_MODE = 0 + +comment "AHCI" + depends on STONEYRIDGE_SATA_MODE = 2 + +comment "LEGACY IDE" + depends on STONEYRIDGE_SATA_MODE = 3 + +comment "IDE to AHCI" + depends on STONEYRIDGE_SATA_MODE = 4 + +comment "AHCI7804" + depends on STONEYRIDGE_SATA_MODE = 5 + +comment "IDE to AHCI7804" + depends on STONEYRIDGE_SATA_MODE = 6 + +if STONEYRIDGE_SATA_MODE = 2 || STONEYRIDGE_SATA_MODE = 5 + +config AHCI_ROM_ID + string "AHCI device PCI IDs" + default "1022,7801" if STONEYRIDGE_SATA_MODE = 2 + default "1022,7804" if STONEYRIDGE_SATA_MODE = 5 + +endif # STONEYRIDGE_SATA_MODE = 2 || STONEYRIDGE_SATA_MODE = 5 + +config STONEYRIDGE_LEGACY_FREE + bool "System is legacy free" + help + Select y if there is no keyboard controller in the system. + This sets variables in AGESA and ACPI. + +config AMDFW_OUTSIDE_CBFS + def_bool n + help + The AMDFW (PSP) is typically locatable in cbfs. Select this + option to manually attach the generated amdfw.rom at an + offset of 0x20000 from the bottom of the coreboot ROM image. + +config SERIRQ_CONTINUOUS_MODE + bool + default n + help + Set this option to y for serial IRQ in continuous mode. + Otherwise it is in quiet mode. + +config STONEYRIDGE_ACPI_IO_BASE + hex + default 0x400 + help + Base address for the ACPI registers. + This value must match the hardcoded value of AGESA. + +config STONEYRIDGE_UART + bool "UART controller on Stoney Ridge" + default n + select DRIVERS_UART_8250MEM + select DRIVERS_UART_8250MEM_32 + select NO_UART_ON_SUPERIO + select UART_OVERRIDE_REFCLK + help + There are two UART controllers in Stoney Ridge. + The UART registers are memory-mapped. UART + controller 0 registers range from FEDC_6000h + to FEDC_6FFFh. UART controller 1 registers + range from FEDC_8000h to FEDC_8FFFh. + +endif # SOC_AMD_STONEYRIDGE diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc new file mode 100644 index 0000000000..7c2682c9bd --- /dev/null +++ b/src/soc/amd/stoneyridge/Makefile.inc @@ -0,0 +1,236 @@ +#***************************************************************************** +# +# Copyright (c) 2012, 2016-2017 Advanced Micro Devices, Inc. +# 2013 - 2014 Sage Electronic Engineering, LLC +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of Advanced Micro Devices, Inc. nor the names of +# its contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +#***************************************************************************** +ifeq ($(CONFIG_SOC_AMD_STONEYRIDGE),y) + +romstage-y += early_setup.c +romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += enable_usbdebug.c +romstage-$(CONFIG_STONEYRIDGE_IMC_FWM) += imc.c +romstage-y += smbus.c +romstage-y += smbus_spd.c +romstage-$(CONFIG_STONEYRIDGE_UART) += uart.c + +ramstage-y += chip.c +ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c +ramstage-$(CONFIG_HAVE_ACPI_TABLES) += fadt.c +ramstage-y += gpio.c +ramstage-y += hda.c +ramstage-y += hudson.c +ramstage-y += ide.c +ramstage-$(CONFIG_STONEYRIDGE_IMC_FWM) += imc.c +ramstage-y += lpc.c +ramstage-y += pci.c +ramstage-y += pcie.c +ramstage-y += reset.c +ramstage-y += sata.c +ramstage-y += sd.c +ramstage-y += sm.c +ramstage-y += smbus.c +ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c +ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c +ramstage-$(CONFIG_STONEYRIDGE_UART) += uart.c +ramstage-y += usb.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c +smm-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c + +CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge +CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge/include +CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge/acpi + +# ROMSIG At ROMBASE + 0x20000: +# +-----------+---------------+----------------+------------+ +# |0x55AA55AA |EC ROM Address |GEC ROM Address |USB3 ROM | +# +-----------+---------------+----------------+------------+ +# |PSPDIR ADDR| +# +-----------+ +# +# EC ROM should be 64K aligned. +STONEYRIDGE_FWM_POSITION=$(call int-add, $(call int-subtract, 0xffffffff $(CONFIG_ROM_SIZE)) 0x20000 1) + +### 0 +FIRMWARE_LOCATE=$(dir $(call strip_quotes, $(CONFIG_AMD_PUBKEY_FILE))) +FIRMWARE_TYPE=ST + +###5 +CONFIG_PUBSIGNEDKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/RtmPubSigned$(FIRMWARE_TYPE).key + +###1 +CONFIG_PSPBTLDR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspBootLoader_prod_$(FIRMWARE_TYPE).sbin + +###3 +CONFIG_PSPRCVR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspRecoveryBootLoader_prod_$(FIRMWARE_TYPE).sbin + +###2 +CONFIG_PSPSCUREOS_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureOs_prod_$(FIRMWARE_TYPE).csbin + +###4 +CONFIG_PSPNVRAM_FILE=$(top)/$(FIRMWARE_LOCATE)/PspNvram$(FIRMWARE_TYPE).bin + +###8 +CONFIG_SMUFWM_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware$(FIRMWARE_TYPE).sbin +CONFIG_SMUFWM_FN_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware$(FIRMWARE_TYPE)_FN.sbin + +###95 +CONFIG_SMUSCS_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuScs$(FIRMWARE_TYPE).bin + +###9 +CONFIG_PSPSECUREDEBUG_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureDebug$(FIRMWARE_TYPE).Key + +###12 +CONFIG_PSPTRUSTLETS_FILE=$(top)/$(FIRMWARE_LOCATE)/PspTrustlets_prod_$(FIRMWARE_TYPE).cbin + +###13 +CONFIG_TRUSTLETKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/TrustletKey_prod_$(FIRMWARE_TYPE).sbin + +###18 +CONFIG_SMUFIRMWARE2_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware2_prod_$(FIRMWARE_TYPE).sbin +CONFIG_SMUFIRMWARE2_FN_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware2_prod_$(FIRMWARE_TYPE)_FN.sbin + +add_opt_prefix=$(if $(call strip_quotes, $(1)), $(2) $(call strip_quotes, $(1)), ) + +OPT_STONEYRIDGE_XHCI_FWM_FILE=$(call add_opt_prefix, $(CONFIG_STONEYRIDGE_XHCI_FWM_FILE), --xhci) +OPT_STONEYRIDGE_IMC_FWM_FILE=$(call add_opt_prefix, $(CONFIG_STONEYRIDGE_IMC_FWM_FILE), --imc) +OPT_STONEYRIDGE_GEC_FWM_FILE=$(call add_opt_prefix, $(CONFIG_STONEYRIDGE_GEC_FWM_FILEddd), --gec) + +CONFIG_2AMD_PUBKEY_FILE =$(CONFIG_AMD_PUBKEY_FILE) +CONFIG_2PSPBTLDR_FILE =$(CONFIG_PSPBTLDR_FILE) +CONFIG_2SMUFWM_FILE =$(CONFIG_SMUFWM_FILE) +CONFIG_2SMUFWM_FN_FILE =$(CONFIG_SMUFWM_FN_FILE) +CONFIG_2PSPRCVR_FILE =$(CONFIG_PSPRCVR_FILE) +CONFIG_2PUBSIGNEDKEY_FILE =$(CONFIG_PUBSIGNEDKEY_FILE) +CONFIG_2PSPSCUREOS_FILE =$(CONFIG_PSPSCUREOS_FILE) +CONFIG_2PSPNVRAM_FILE =$(CONFIG_PSPNVRAM_FILE) +CONFIG_2PSPSECUREDEBUG_FILE =$(CONFIG_PSPSECUREDEBUG_FILE) +CONFIG_2PSPTRUSTLETS_FILE =$(CONFIG_PSPTRUSTLETS_FILE) +CONFIG_2TRUSTLETKEY_FILE =$(CONFIG_TRUSTLETKEY_FILE) +CONFIG_2SMUFIRMWARE2_FILE =$(CONFIG_SMUFIRMWARE2_FILE) +CONFIG_2SMUFIRMWARE2_FN_FILE =$(CONFIG_SMUFIRMWARE2_FN_FILE) +CONFIG_2SMUSCS_FILE =$(CONFIG_SMUSCS_FILE) + +OPT_2AMD_PUBKEY_FILE=$(call add_opt_prefix, $(CONFIG_2AMD_PUBKEY_FILE), --pubkey2) +OPT_2PSPBTLDR_FILE=$(call add_opt_prefix, $(CONFIG_2PSPBTLDR_FILE), --bootloader2) +OPT_2SMUFWM_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFWM_FILE), --smufirmware_2) +OPT_2PSPRCVR_FILE=$(call add_opt_prefix, $(CONFIG_2PSPRCVR_FILE), --recovery2) +OPT_2PUBSIGNEDKEY_FILE=$(call add_opt_prefix, $(CONFIG_2PUBSIGNEDKEY_FILE), --rtmpubkey2) +OPT_2PSPSCUREOS_FILE=$(call add_opt_prefix, $(CONFIG_2PSPSCUREOS_FILE), --secureos2) +OPT_2PSPNVRAM_FILE=$(call add_opt_prefix, $(CONFIG_2PSPNVRAM_FILE), --nvram2) +OPT_2PSPSECUREDEBUG_FILE=$(call add_opt_prefix, $(CONFIG_2PSPSECUREDEBUG_FILE), --securedebug2) +OPT_2PSPTRUSTLETS_FILE=$(call add_opt_prefix, $(CONFIG_2PSPTRUSTLETS_FILE), --trustlets2) +OPT_2TRUSTLETKEY_FILE=$(call add_opt_prefix, $(CONFIG_2TRUSTLETKEY_FILE), --trustletkey2) +OPT_2SMUFIRMWARE2_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFIRMWARE2_FILE), --smufirmware2_2) +OPT_2SMUSCS_FILE=$(call add_opt_prefix, $(CONFIG_2SMUSCS_FILE), --smuscs2) +OPT_2SMUFWM_FN_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFWM_FN_FILE), --smufnfirmware_2) +OPT_2SMUFIRMWARE2_FN_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFIRMWARE2_FN_FILE), --smufnfirmware2_2) + + +$(obj)/amdfw.rom: $(call strip_quotes, $(CONFIG_STONEYRIDGE_XHCI_FWM_FILE)) \ + $(call strip_quotes, $(CONFIG_STONEYRIDGE_IMC_FWM_FILE)) \ + $(call strip_quotes, $(CONFIG_STONEYRIDGE_GEC_FWM_FILE)) \ + $(call strip_quotes, $(CONFIG_AMD_PUBKEY_FILE)) \ + $(call strip_quotes, $(CONFIG_PUBSIGNEDKEY_FILE)) \ + $(call strip_quotes, $(CONFIG_PSPBTLDR_FILE)) \ + $(call strip_quotes, $(CONFIG_PSPRCVR_FILE)) \ + $(call strip_quotes, $(CONFIG_PSPSCUREOS_FILE)) \ + $(call strip_quotes, $(CONFIG_PSPNVRAM_FILE)) \ + $(call strip_quotes, $(CONFIG_SMUFWM_FILE)) \ + $(call strip_quotes, $(CONFIG_SMUSCS_FILE)) \ + $(call strip_quotes, $(CONFIG_PSPSECUREDEBUG_FILE)) \ + $(call strip_quotes, $(CONFIG_PSPTRUSTLETS_FILE)) \ + $(call strip_quotes, $(CONFIG_TRUSTLETKEY_FILE)) \ + $(call strip_quotes, $(CONFIG_SMUFIRMWARE2_FILE)) \ + $(call strip_quotes, $(CONFIG_2AMD_PUBKEY_FILE)) \ + $(call strip_quotes, $(CONFIG_2PUBSIGNEDKEY_FILE)) \ + $(call strip_quotes, $(CONFIG_2PSPBTLDR_FILE)) \ + $(call strip_quotes, $(CONFIG_2SMUFWM_FILE)) \ + $(call strip_quotes, $(CONFIG_2SMUFWM_FN_FILE)) \ + $(call strip_quotes, $(CONFIG_2PSPRCVR_FILE)) \ + $(call strip_quotes, $(CONFIG_2PSPSCUREOS_FILE)) \ + $(call strip_quotes, $(CONFIG_2PSPNVRAM_FILE)) \ + $(call strip_quotes, $(CONFIG_2SMUSCS_FILE)) \ + $(call strip_quotes, $(CONFIG_2PSPSECUREDEBUG_FILE)) \ + $(call strip_quotes, $(CONFIG_2PSPTRUSTLETS_FILE)) \ + $(call strip_quotes, $(CONFIG_2TRUSTLETKEY_FILE)) \ + $(call strip_quotes, $(CONFIG_2SMUFIRMWARE2_FILE)) \ + $(call strip_quotes, $(CONFIG_2SMUFIRMWARE2_FN_FILE)) \ + $(AMDFWTOOL) + rm -f $@ + @printf " AMDFWTOOL $(subst $(obj)/,,$(@))\n" + $(AMDFWTOOL) \ + $(OPT_STONEYRIDGE_XHCI_FWM_FILE) \ + $(OPT_STONEYRIDGE_IMC_FWM_FILE) \ + $(OPT_STONEYRIDGE_GEC_FWM_FILE) \ + $(OPT_AMD_PUBKEY_FILE) \ + $(OPT_PSPBTLDR_FILE) \ + $(OPT_SMUFWM_FILE) \ + $(OPT_PSPRCVR_FILE) \ + $(OPT_PUBSIGNEDKEY_FILE) \ + $(OPT_PSPSCUREOS_FILE) \ + $(OPT_PSPNVRAM_FILE) \ + $(OPT_PSPSECUREDEBUG_FILE) \ + $(OPT_PSPTRUSTLETS_FILE) \ + $(OPT_TRUSTLETKEY_FILE) \ + $(OPT_SMUFIRMWARE2_FILE) \ + $(OPT_SMUSCS_FILE) \ + $(OPT_2AMD_PUBKEY_FILE) \ + $(OPT_2PSPBTLDR_FILE) \ + $(OPT_2SMUFWM_FILE) \ + $(OPT_2SMUFWM_FN_FILE) \ + $(OPT_2PSPRCVR_FILE) \ + $(OPT_2PUBSIGNEDKEY_FILE) \ + $(OPT_2PSPSCUREOS_FILE) \ + $(OPT_2PSPNVRAM_FILE) \ + $(OPT_2PSPSECUREDEBUG_FILE) \ + $(OPT_2PSPTRUSTLETS_FILE) \ + $(OPT_2TRUSTLETKEY_FILE) \ + $(OPT_2SMUFIRMWARE2_FILE) \ + $(OPT_2SMUFIRMWARE2_FN_FILE) \ + $(OPT_2SMUSCS_FILE) \ + --flashsize $(CONFIG_ROM_SIZE) \ + --output $@ + +ifeq ($(CONFIG_AMDFW_OUTSIDE_CBFS),y) +PHONY+=add_amdfw +INTERMEDIATE+=add_amdfw + +add_amdfw: $(obj)/coreboot.pre $(obj)/amdfw.rom + printf " DD Adding AMD Firmware\n" + dd if=$(obj)/amdfw.rom \ + of=$(obj)/coreboot.pre conv=notrunc bs=1 seek=131072 >/dev/null 2>&1 + +else # ifeq ($(CONFIG_AMDFW_OUTSIDE_CBFS),y) + +cbfs-files-y += apu/amdfw +apu/amdfw-file := $(obj)/amdfw.rom +apu/amdfw-position := $(STONEYRIDGE_FWM_POSITION) +apu/amdfw-type := raw + +endif # ifeq ($(CONFIG_AMDFW_OUTSIDE_CBFS),y) + +endif diff --git a/src/soc/amd/stoneyridge/acpi/fch.asl b/src/soc/amd/stoneyridge/acpi/fch.asl new file mode 100644 index 0000000000..df9caacf56 --- /dev/null +++ b/src/soc/amd/stoneyridge/acpi/fch.asl @@ -0,0 +1,184 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* South Bridge */ +/* _SB.PCI0 */ + +/* Operating System Capabilities Method */ +Method(_OSC,4) +{ + // Create DWord-addressable fields from the Capabilities Buffer + CreateDWordField(Arg3,0,CDW1) + CreateDWordField(Arg3,4,CDW2) + CreateDWordField(Arg3,8,CDW3) + + /* Check for proper PCI/PCIe UUID */ + If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + { + /* Let OS control everything */ + Return (Arg3) + } Else { + Or(CDW1,4,CDW1) // Unrecognized UUID + Return(Arg3) + } +} + +/* Describe the Southbridge devices */ + +/* 0:11.0 - SATA */ +Device(STCR) { + Name(_ADR, 0x00110000) +} /* end STCR */ + +/* 0:14.0 - SMBUS */ +Device(SBUS) { + Name(_ADR, 0x00140000) +} /* end SBUS */ + +#include "usb.asl" + +/* 0:14.2 - I2S Audio */ + +/* 0:14.3 - LPC */ +#include "lpc.asl" + +/* 0:14.7 - SD Controller */ +Device(SDCN) { + Name(_ADR, 0x00140007) +} /* end SDCN */ + +Name(CRES, ResourceTemplate() { + /* Set the Bus number and Secondary Bus number for the PCI0 device + * The Secondary bus range for PCI0 lets the system + * know what bus values are allowed on the downstream + * side of this PCI bus if there is a PCI-PCI bridge. + * PCI busses can have 256 secondary busses which + * range from [0-0xFF] but they do not need to be + * sequential. + */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x00FF, /* range maximum */ + 0x0000, /* translation */ + 0x0100, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x03B0, /* range minimum */ + 0x03DF, /* range maximum */ + 0x0000, /* translation */ + 0x0030 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) +}) /* End Name(_SB.PCI0.CRES) */ + +Method(_CRS, 0) { + /* DBGO("\\_SB\\PCI0\\_CRS\n") */ + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ +} /* end of Method(_SB.PCI0._CRS) */ + +/* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ +Method(_INI, 0) { + /* DBGO("\\_SB\\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \\_OS=") */ + /* DBGO(\_OS) */ + /* DBGO("\n \\_REV=") */ + /* DBGO(\_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + +#if IS_ENABLED(CONFIG_ACPI_ENABLE_THERMAL_ZONE) + /* TODO: It is unstable. */ + #include "acpi/AmdImc.asl" /* Hudson IMC function */ + ITZE() /* enable IMC Fan Control*/ +#endif +} /* End Method(_SB._INI) */ + +Method(OSFL, 0){ + + if (LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if (CondRefOf(\_OSI)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (\_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(\_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) +} diff --git a/src/soc/amd/stoneyridge/acpi/lpc.asl b/src/soc/amd/stoneyridge/acpi/lpc.asl new file mode 100644 index 0000000000..6332d47152 --- /dev/null +++ b/src/soc/amd/stoneyridge/acpi/lpc.asl @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* 0:14.3 - LPC */ +Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + OperationRegion(CFG,PCI_Config,0x0,0x100) // Map PCI Configuration Space + Field(CFG,DWordAcc,NoLock,Preserve){ + Offset(0xA0), + BAR,32} // SPI Controller Base Address Register (Index 0xA0) + + Device(LDRC) // LPC device: Resource consumption + { + Name (_HID, EISAID("PNP0C02")) // ID for Motherboard resources + Name (CRS, ResourceTemplate () // Current Motherboard resources + { + Memory32Fixed(ReadWrite, // Setup for fixed resource location for SPI base address + 0x00000000, // Address Base + 0x00000000, // Address Length + BAR0 // Descriptor Name + ) + }) + + Method(_CRS,0,NotSerialized) + { + CreateDwordField(^CRS,^BAR0._BAS,SPIB) // Field to hold SPI base address + CreateDwordField(^CRS,^BAR0._LEN,SPIL) // Field to hold SPI address length + Store(BAR,SPIB) // SPI base address mapped + Store(0x1000,SPIL) // 4k space mapped + Return(CRS) + } + } + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +} /* end LIBR */ diff --git a/src/soc/amd/stoneyridge/acpi/pci_int.asl b/src/soc/amd/stoneyridge/acpi/pci_int.asl new file mode 100644 index 0000000000..52e9e28e39 --- /dev/null +++ b/src/soc/amd/stoneyridge/acpi/pci_int.asl @@ -0,0 +1,469 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + /* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */ + OperationRegion(PCFG, SystemMemory, PCBA, PCLN) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + \_SB.CIRQ() + } + Store(Arg0, PMOD) + } + + Method(CIRQ, 0x00, NotSerialized){ + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKA\\_DIS\n") */ + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKA\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKA\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKA\\_SRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKB\\_DIS\n") */ + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKB\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKB\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKB\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKC\\_DIS\n") */ + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKC\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKC\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKC\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKD\\_DIS\n") */ + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKD\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKD\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKD\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRD) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKE\\_DIS\n") */ + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKE\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKE\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKE\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKF\\_DIS\n") */ + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKF\\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKF\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKF\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKG\\_DIS\n") */ + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKG\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKG\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKG\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRG) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKH\\_DIS\n") */ + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKH\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKH\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKH\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ diff --git a/src/soc/amd/stoneyridge/acpi/pcie.asl b/src/soc/amd/stoneyridge/acpi/pcie.asl new file mode 100644 index 0000000000..adb5c4d2bf --- /dev/null +++ b/src/soc/amd/stoneyridge/acpi/pcie.asl @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + /* PCI IRQ mapping registers, C00h-C01h. */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x60), /* AcpiPm1EvgBlk */ + P1EB, 16, + Offset(0xEE), + UPWS, 3, + } + OperationRegion (P1E0, SystemIO, P1EB, 0x04) + Field (P1E0, ByteAcc, Nolock, Preserve) { + Offset(0x02), + , 14, + PEWD, 1, + } diff --git a/src/soc/amd/stoneyridge/acpi/sleepstates.asl b/src/soc/amd/stoneyridge/acpi/sleepstates.asl new file mode 100644 index 0000000000..d93f068bb7 --- /dev/null +++ b/src/soc/amd/stoneyridge/acpi/sleepstates.asl @@ -0,0 +1,38 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Supported sleep states: */ +Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + +If (LAnd(SSFG, 0x01)) { + Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ +} +If (LAnd(SSFG, 0x02)) { + Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ +} +#if CONFIG_HAVE_ACPI_RESUME +If (LAnd(SSFG, 0x04)) { + Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ +} +#endif +If (LAnd(SSFG, 0x08)) { + Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ +} + +Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + +Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ +Name(CSMS, 0) /* Current System State */ diff --git a/src/soc/amd/stoneyridge/acpi/smbus.asl b/src/soc/amd/stoneyridge/acpi/smbus.asl new file mode 100644 index 0000000000..e69de29bb2 diff --git a/src/soc/amd/stoneyridge/acpi/usb.asl b/src/soc/amd/stoneyridge/acpi/usb.asl new file mode 100644 index 0000000000..fd3ff54f7d --- /dev/null +++ b/src/soc/amd/stoneyridge/acpi/usb.asl @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* 0:12.0 - OHCI */ +Device(UOH1) { + Name(_ADR, 0x00120000) + Name(_PRW, Package() {0x0B, 3}) +} /* end UOH1 */ + +/* 0:12.2 - EHCI */ +Device(UOH2) { + Name(_ADR, 0x00120002) + Name(_PRW, Package() {0x0B, 3}) +} /* end UOH2 */ + +/* 0:13.0 - OHCI */ +Device(UOH3) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) +} /* end UOH3 */ + +/* 0:13.2 - EHCI */ +Device(UOH4) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) +} /* end UOH4 */ + +/* 0:16.0 - OHCI */ +Device(UOH5) { + Name(_ADR, 0x00160000) + Name(_PRW, Package() {0x0B, 3}) +} /* end UOH5 */ + +/* 0:16.2 - EHCI */ +Device(UOH6) { + Name(_ADR, 0x00160002) + Name(_PRW, Package() {0x0B, 3}) +} /* end UOH5 */ + +/* 0:10.0 - XHCI 0*/ +Device(XHC0) { + Name(_ADR, 0x00100000) + Name(_PRW, Package() {0x0B, 4}) +} /* end XHC0 */ + +#if !CONFIG_SOUTHBRIDGE_AMD_PI_AVALON && !CONFIG_SOUTHBRIDGE_AMD_PI_KERN +/* 0:10.1 - XHCI 1*/ +Device(XHC1) { + Name(_ADR, 0x00100001) + Name(_PRW, Package() {0x0B, 4}) +} /* end XHC1 */ +#endif diff --git a/src/soc/amd/stoneyridge/bootblock/bootblock.c b/src/soc/amd/stoneyridge/bootblock/bootblock.c new file mode 100644 index 0000000000..32b129862d --- /dev/null +++ b/src/soc/amd/stoneyridge/bootblock/bootblock.c @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +/* + * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF. + * + * Hardware should enable LPC ROM by pin straps. This function does not + * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations. + * + * The HUDSON power-on default is to map 512K ROM space. + * + */ +static void hudson_enable_rom(void) +{ + u8 reg8; + pci_devfn_t dev; + + dev = PCI_DEV(0, 0x14, 3); + + /* Decode variable LPC ROM address ranges 1 and 2. */ + reg8 = pci_io_read_config8(dev, 0x48); + reg8 |= (1 << 3) | (1 << 4); + pci_io_write_config8(dev, 0x48, reg8); + + /* LPC ROM address range 1: */ + /* Enable LPC ROM range mirroring start at 0x000e(0000). */ + pci_io_write_config16(dev, 0x68, 0x000e); + /* Enable LPC ROM range mirroring end at 0x000f(ffff). */ + pci_io_write_config16(dev, 0x6a, 0x000f); + + /* LPC ROM address range 2: */ + /* + * Enable LPC ROM range start at: + * 0xfff8(0000): 512KB + * 0xfff0(0000): 1MB + * 0xffe0(0000): 2MB + * 0xffc0(0000): 4MB + */ + pci_io_write_config16(dev, 0x6c, 0x10000 - (CONFIG_COREBOOT_ROMSIZE_KB >> 6)); + /* Enable LPC ROM range end at 0xffff(ffff). */ + pci_io_write_config16(dev, 0x6e, 0xffff); +} + +static void bootblock_southbridge_init(void) +{ + hudson_enable_rom(); +} diff --git a/src/soc/amd/stoneyridge/chip.c b/src/soc/amd/stoneyridge/chip.c new file mode 100644 index 0000000000..3faf536ef9 --- /dev/null +++ b/src/soc/amd/stoneyridge/chip.c @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include + +static void pci_domain_set_resources(device_t dev) +{ + assign_resources(dev->link_list); +} + +static struct device_operations pci_domain_ops = { + .set_resources = &pci_domain_set_resources, +}; + +static struct device_operations cpu_bus_ops = { +}; + +static void enable_dev(device_t dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_DOMAIN) { + dev->ops = &pci_domain_ops; + } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { + dev->ops = &cpu_bus_ops; + } else if (dev->path.type == DEVICE_PATH_PCI) { + hudson_enable(dev); + } +} + +static void soc_init(void *chip_info) +{ + hudson_init(chip_info); +} + +static void soc_final(void *chip_info) +{ + hudson_final(chip_info); +} + +struct chip_operations soc_amd_stoneyridge_ops = { + CHIP_NAME("AMD StoneyRidge SOC") + .enable_dev = &enable_dev, + .init = &soc_init, + .final = &soc_final +}; + diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h new file mode 100644 index 0000000000..9dd4997931 --- /dev/null +++ b/src/soc/amd/stoneyridge/chip.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef STONEYRIDGE_CHIP_H +#define STONEYRIDGE_CHIP_H + +#include + +struct soc_amd_stoneyridge_config +{ + u32 ide0_enable : 1; + u32 sata0_enable : 1; + u32 boot_switch_sata_ide : 1; + u32 hda_viddid; + u8 gpp_configuration; + u8 sd_mode; +}; + +typedef struct soc_amd_stoneyridge_config config_t; + +#endif /* STONEYRIDGE_CHIP_H */ diff --git a/src/soc/amd/stoneyridge/early_setup.c b/src/soc/amd/stoneyridge/early_setup.c new file mode 100644 index 0000000000..9bca381fbe --- /dev/null +++ b/src/soc/amd/stoneyridge/early_setup.c @@ -0,0 +1,334 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _STONEYRIDGE_EARLY_SETUP_C_ +#define _STONEYRIDGE_EARLY_SETUP_C_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void configure_hudson_uart(void) +{ + u8 byte; + + byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2); + byte |= 1 << 3; + write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2, byte); + byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62); + byte |= 1 << 3; + write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62, byte); + write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0); + write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0); + write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0); + write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0); + + udelay(2000); + write8((void *)0xFEDC6000 + 0x2000 * CONFIG_UART_FOR_CONSOLE + 0x88, 0x01); /* reset UART */ +} + +void hudson_pci_port80(void) +{ + u8 byte; + pci_devfn_t dev; + + /* P2P Bridge */ + dev = PCI_DEV(0, 0x14, 4); + + /* Chip Control: Enable subtractive decoding */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 5; + pci_write_config8(dev, 0x40, byte); + + /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 7; + pci_write_config8(dev, 0x4B, byte); + + /* The same IO Base and IO Limit here is meaningful because we set the + * bridge to be subtractive. During early setup stage, we have to make + * sure that data can go through port 0x80. + */ + /* IO Base: 0xf000 */ + byte = pci_read_config8(dev, 0x1C); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1C, byte); + + /* IO Limit: 0xf000 */ + byte = pci_read_config8(dev, 0x1D); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1D, byte); + + /* PCI Command: Enable IO response */ + byte = pci_read_config8(dev, 0x04); + byte |= 1 << 0; + pci_write_config8(dev, 0x04, byte); + + /* LPC controller */ + dev = PCI_DEV(0, 0x14, 3); + + byte = pci_read_config8(dev, 0x4A); + byte &= ~(1 << 5); /* disable lpc port 80 */ + pci_write_config8(dev, 0x4A, byte); +} + +void hudson_lpc_port80(void) +{ + u8 byte; + pci_devfn_t dev; + + /* Enable LPC controller */ + outb(0xEC, 0xCD6); + byte = inb(0xCD7); + byte |= 1; + outb(0xEC, 0xCD6); + outb(byte, 0xCD7); + + /* Enable port 80 LPC decode in pci function 3 configuration space. */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x4a); + byte |= 1 << 5; /* enable port 80 */ + pci_write_config8(dev, 0x4a, byte); +} + +void hudson_lpc_decode(void) +{ + pci_devfn_t dev; + u32 tmp = 0; + + /* Enable I/O decode to LPC bus */ + dev = PCI_DEV(0, PCU_DEV, LPC_FUNC); + tmp = DECODE_ENABLE_PARALLEL_PORT0 | DECODE_ENABLE_PARALLEL_PORT2 + | DECODE_ENABLE_PARALLEL_PORT4 | DECODE_ENABLE_SERIAL_PORT0 + | DECODE_ENABLE_SERIAL_PORT1 | DECODE_ENABLE_SERIAL_PORT2 + | DECODE_ENABLE_SERIAL_PORT3 | DECODE_ENABLE_SERIAL_PORT4 + | DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT6 + | DECODE_ENABLE_SERIAL_PORT7 | DECODE_ENABLE_AUDIO_PORT0 + | DECODE_ENABLE_AUDIO_PORT1 | DECODE_ENABLE_AUDIO_PORT2 + | DECODE_ENABLE_AUDIO_PORT3 | DECODE_ENABLE_MSS_PORT2 + | DECODE_ENABLE_MSS_PORT3 | DECODE_ENABLE_FDC_PORT0 + | DECODE_ENABLE_FDC_PORT1 | DECODE_ENABLE_GAME_PORT + | DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT + | DECODE_ENABLE_ADLIB_PORT; + + pci_write_config32(dev, LPC_IO_PORT_DECODE_ENABLE, tmp); +} + +static void enable_wideio(uint8_t port, uint16_t size) +{ + uint32_t wideio_enable[] = { + LPC_WIDEIO0_ENABLE, + LPC_WIDEIO1_ENABLE, + LPC_WIDEIO2_ENABLE + }; + uint32_t alt_wideio_enable[] = { + LPC_ALT_WIDEIO0_ENABLE, + LPC_ALT_WIDEIO1_ENABLE, + LPC_ALT_WIDEIO2_ENABLE + }; + pci_devfn_t dev = PCI_DEV(0, PCU_DEV, LPC_FUNC); + uint32_t tmp; + + /* Only allow port 0-2 */ + assert(port <= ARRAY_SIZE(wideio_enable)); + + if (size == 16) { + tmp = pci_read_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE); + tmp |= alt_wideio_enable[port]; + pci_write_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE, tmp); + } else { /* 512 */ + tmp = pci_read_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE); + tmp &= ~alt_wideio_enable[port]; + pci_write_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE, tmp); + } + + /* Enable the range */ + tmp = pci_read_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE); + tmp |= wideio_enable[port]; + pci_write_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE, tmp); +} + +/* + * lpc_wideio_window() may be called any point in romstage, but take + * care that AGESA doesn't overwrite the range this function used. + * The function checks if there is an empty range and if all ranges are + * used the function throws an assert. The function doesn't check for a + * duplicate range, for ranges that can be merged into a single + * range, or ranges that overlap. + * + * The developer is expected to ensure that there are no conflicts. + */ +static void lpc_wideio_window(uint16_t base, uint16_t size) +{ + pci_devfn_t dev = PCI_DEV(0, PCU_DEV, LPC_FUNC); + u32 tmp; + + /* Support 512 or 16 bytes per range */ + assert(size == 512 || size == 16); + + /* Find and open Base Register and program it */ + tmp = pci_read_config32(dev, LPC_WIDEIO_GENERIC_PORT); + + if ((tmp & 0xFFFF) == 0) { /* WIDEIO0 */ + tmp |= base; + pci_write_config32(dev, LPC_WIDEIO_GENERIC_PORT, tmp); + enable_wideio(0, size); + } else if ((tmp & 0xFFFF0000) == 0) { /* WIDEIO1 */ + tmp |= (base << 16); + pci_write_config32(dev, LPC_WIDEIO_GENERIC_PORT, tmp); + enable_wideio(1, size); + } else { /* Check WIDEIO2 register */ + tmp = pci_read_config32(dev, LPC_WIDEIO2_GENERIC_PORT); + if ((tmp & 0xFFFF) == 0) { /* WIDEIO2 */ + tmp |= base; + pci_write_config32(dev, LPC_WIDEIO2_GENERIC_PORT, tmp); + enable_wideio(2, size); + } else { /* All WIDEIO locations used*/ + assert(0); + } + } +} + +void lpc_wideio_512_window(uint16_t base) +{ + assert(IS_ALIGNED(base, 512)); + lpc_wideio_window(base, 512); +} + +void lpc_wideio_16_window(uint16_t base) +{ + assert(IS_ALIGNED(base, 16)); + lpc_wideio_window(base, 16); +} + +int s3_save_nvram_early(u32 dword, int size, int nvram_pos) +{ + int i; + printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos); + + for (i = 0; i < size; i++) { + outb(nvram_pos, BIOSRAM_INDEX); + outb((dword >>(8 * i)) & 0xff , BIOSRAM_DATA); + nvram_pos++; + } + + return nvram_pos; +} + +int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) +{ + u32 data = *old_dword; + int i; + for (i = 0; i < size; i++) { + outb(nvram_pos, BIOSRAM_INDEX); + data &= ~(0xff << (i * 8)); + data |= inb(BIOSRAM_DATA) << (i *8); + nvram_pos++; + } + *old_dword = data; + printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n", *old_dword, size, + nvram_pos-size); + return nvram_pos; +} + +void hudson_clk_output_48Mhz(void) +{ + u32 data, *memptr; + + /* + * Enable the X14M_25M_48M_OSC pin and leaving it at it's default so + * 48Mhz will be on ball AP13 (FT3b package) + */ + memptr = (u32 *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40 ); + data = *memptr; + + /* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */ + data &= (u32)~(1<<2); + *memptr = data; +} + +static uintptr_t hudson_spibase(void) +{ + /* Make sure the base address is predictable */ + device_t dev = PCI_DEV(0, 0x14, 3); + + u32 base = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER) + & 0xfffffff0; + if (!base){ + base = SPI_BASE_ADDRESS; + pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, base + | SPI_ROM_ENABLE); + /* PCI_COMMAND_MEMORY is read-only and enabled. */ + } + return (uintptr_t)base; +} + +void hudson_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm) +{ + uintptr_t base = hudson_spibase(); + write16((void *)base + SPI100_SPEED_CONFIG, + (norm << SPI_NORM_SPEED_NEW_SH) | + (fast << SPI_FAST_SPEED_NEW_SH) | + (alt << SPI_ALT_SPEED_NEW_SH) | + (tpm << SPI_TPM_SPEED_NEW_SH)); + write16((void *)base + SPI100_ENABLE, SPI_USE_SPI100); +} + +void hudson_disable_4dw_burst(void) +{ + uintptr_t base = hudson_spibase(); + write16((void *)base + SPI100_HOST_PREF_CONFIG, + read16((void *)base + SPI100_HOST_PREF_CONFIG) + & ~SPI_RD4DW_EN_HOST); +} + +/* Hudson 1-3 only. For Hudson 1, call with fast=1 */ +void hudson_set_readspeed(u16 norm, u16 fast) +{ + uintptr_t base = hudson_spibase(); + write16((void *)base + SPI_CNTRL1, (read16((void *)base + SPI_CNTRL1) + & ~SPI_CNTRL1_SPEED_MASK) + | (norm << SPI_NORM_SPEED_SH) + | (fast << SPI_FAST_SPEED_SH)); +} + +void hudson_read_mode(u32 mode) +{ + uintptr_t base = hudson_spibase(); + write32((void *)base + SPI_CNTRL0, + (read32((void *)base + SPI_CNTRL0) + & ~SPI_READ_MODE_MASK) | mode); +} + +void hudson_tpm_decode_spi(void) +{ + device_t dev = PCI_DEV(0, 0x14, 3); /* LPC device */ + + u32 spibase = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER); + pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, spibase + | ROUTE_TPM_2_SPI); +} + +#endif diff --git a/src/soc/amd/stoneyridge/enable_usbdebug.c b/src/soc/amd/stoneyridge/enable_usbdebug.c new file mode 100644 index 0000000000..dc09b85503 --- /dev/null +++ b/src/soc/amd/stoneyridge/enable_usbdebug.c @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Use simple device model for this file even in ramstage +#define __SIMPLE_DEVICE__ + +#include +#include +#include +#include +#include + +#define DEBUGPORT_MISC_CONTROL 0x80 + +pci_devfn_t pci_ehci_dbg_dev(unsigned int hcd_idx) +{ + if (hcd_idx == 3) + return PCI_DEV(0, 0x16, 0); + else if (hcd_idx == 2) + return PCI_DEV(0, 0x13, 0); + else + return PCI_DEV(0, 0x12, 0); +} + +void pci_ehci_dbg_set_port(pci_devfn_t dev, unsigned int port) +{ + u8 *base_regs = pci_ehci_base_regs(dev); + u32 reg32; + + /* Write the port number to DEBUGPORT_MISC_CONTROL[31:28]. */ + reg32 = read32(base_regs + DEBUGPORT_MISC_CONTROL); + reg32 &= ~(0xf << 28); + reg32 |= (port << 28); + reg32 |= (1 << 27); /* Enable Debug Port port number remapping. */ + write32(base_regs + DEBUGPORT_MISC_CONTROL, reg32); +} + + +void pci_ehci_dbg_enable(pci_devfn_t dev, unsigned long base) +{ + /* Enable all of the USB controllers */ + outb(0xEF, PM_INDEX); + outb(0x7F, PM_DATA); + + pci_write_config32(dev, EHCI_BAR_INDEX, base); + pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); +} diff --git a/src/soc/amd/stoneyridge/fadt.c b/src/soc/amd/stoneyridge/fadt.c new file mode 100644 index 0000000000..9e5a7951be --- /dev/null +++ b/src/soc/amd/stoneyridge/fadt.c @@ -0,0 +1,207 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include +#include +#include +#include +#include +#include +#include + +#if CONFIG_STONEYRIDGE_LEGACY_FREE + #define FADT_BOOT_ARCH ACPI_FADT_LEGACY_FREE +#else + #define FADT_BOOT_ARCH (ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042) +#endif + +#ifndef FADT_PM_PROFILE + #define FADT_PM_PROFILE PM_UNSPECIFIED +#endif + +/* + * Reference section 5.2.9 Fixed ACPI Description Table (FADT) + * in the ACPI 3.0b specification. + */ +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", STONEYRIDGE_ACPI_IO_BASE); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = ACPI_FADT_REV_ACPI_3_0; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */ + fadt->preferred_pm_profile = FADT_PM_PROFILE; + fadt->sci_int = 9; /* HUDSON - IRQ 09 - ACPI SCI */ + + if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) { + fadt->smi_cmd = ACPI_SMI_CTL_PORT; + fadt->acpi_enable = ACPI_SMI_CMD_ENABLE; + fadt->acpi_disable = ACPI_SMI_CMD_DISABLE; + fadt->s4bios_req = 0; /* Not supported */ + fadt->pstate_cnt = 0; /* Not supported */ + fadt->cst_cnt = 0; /* Not supported */ + outl(0x0, ACPI_PM1_CNT_BLK); /* clear SCI_EN */ + } else { + fadt->smi_cmd = 0; /* disable system management mode */ + fadt->acpi_enable = 0; /* unused if SMI_CMD = 0 */ + fadt->acpi_disable = 0; /* unused if SMI_CMD = 0 */ + fadt->s4bios_req = 0; /* unused if SMI_CMD = 0 */ + fadt->pstate_cnt = 0; /* unused if SMI_CMD = 0 */ + fadt->cst_cnt = 0x00; /* unused if SMI_CMD = 0 */ + outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ + } + + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = 0x0000; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* No gpe1 block in hudson */ + + fadt->pm1_evt_len = 4; /* 32 bits */ + fadt->pm1_cnt_len = 2; /* 16 bits */ + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; /* 32 bits */ + fadt->gpe0_blk_len = 8; /* 64 bits */ + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED; + fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED; + fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->duty_offset = 1; /* CLK_VAL bits 3:1 */ + fadt->duty_width = 3; /* CLK_VAL bits 3:1 */ + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alarm work */ + fadt->iapc_boot_arch = FADT_BOOT_ARCH; /* See table 5-10 */ + fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->flags = ACPI_FADT_WBINVD | /* See table 5-10 ACPI 3.0a spec */ + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_32BIT_TIMER | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_PCI_EXPRESS_WAKE | + ACPI_FADT_PLATFORM_CLOCK | + ACPI_FADT_S4_RTC_VALID | + ACPI_FADT_REMOTE_POWER_ON; + + /* Format is from 5.2.3.1: Generic Address Structure */ + /* reset_reg: see section 4.7.3.6 ACPI 3.0a spec */ + /* 8 bit write of value 0x06 to 0xCF9 in IO space */ + fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + + fadt->res3 = 0; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res4 = 0; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res5 = 0; /* reserved, MUST be 0 ACPI 3.0 */ + + fadt->x_firmware_ctl_l = 0; /* set to 0 if firmware_ctrl is used */ + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.access_size = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + + fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.access_size = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.access_size = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + /* + * Note: Under this current AMD C state implementation, this is no longer + * used and should not be reported to OS. + */ + fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->x_pm2_cnt_blk.addrl = 0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + + fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + + fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + Event Enable */ + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + + fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.access_size = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/soc/amd/stoneyridge/gpio.c b/src/soc/amd/stoneyridge/gpio.c new file mode 100644 index 0000000000..dcef11d4bf --- /dev/null +++ b/src/soc/amd/stoneyridge/gpio.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * Copyright (C) 2017 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +int gpio_get(gpio_t gpio_num) +{ + uint32_t reg; + + reg = read32((void*)(uintptr_t)gpio_num); + + return !!(reg & GPIO_PIN_STS); +} diff --git a/src/soc/amd/stoneyridge/hda.c b/src/soc/amd/stoneyridge/hda.c new file mode 100644 index 0000000000..2623236974 --- /dev/null +++ b/src/soc/amd/stoneyridge/hda.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static const unsigned short pci_device_ids[] = { + PCI_DEVICE_ID_AMD_SB900_HDA, + PCI_DEVICE_ID_AMD_CZ_HDA, + 0 +}; + +static void hda_init(struct device *dev) +{ +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations hda_audio_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = hda_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver hdaaudio_driver __pci_driver = { + .ops = &hda_audio_ops, + .vendor = PCI_VENDOR_ID_AMD, + .devices = pci_device_ids, +}; diff --git a/src/soc/amd/stoneyridge/hudson.c b/src/soc/amd/stoneyridge/hudson.c new file mode 100644 index 0000000000..83070144e7 --- /dev/null +++ b/src/soc/amd/stoneyridge/hudson.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#if IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM) +#include +#endif + + +int acpi_get_sleep_type(void) +{ + u16 tmp = inw(ACPI_PM1_CNT_BLK); + tmp = ((tmp & (7 << 10)) >> 10); + return (int)tmp; +} + +void pm_write8(u8 reg, u8 value) +{ + write8((void *)(PM_MMIO_BASE + reg), value); +} + +u8 pm_read8(u8 reg) +{ + return read8((void *)(PM_MMIO_BASE + reg)); +} + +void pm_write16(u8 reg, u16 value) +{ + write16((void *)(PM_MMIO_BASE + reg), value); +} + +u16 pm_read16(u16 reg) +{ + return read16((void *)(PM_MMIO_BASE + reg)); +} + +void hudson_enable(device_t dev) +{ + printk(BIOS_DEBUG, "hudson_enable()\n"); + switch (dev->path.pci.devfn) { + case (0x14 << 3) | 7: /* 0:14.7 SD */ + if (dev->enabled == 0) { + // read the VENDEV ID + device_t sd_dev = dev_find_slot( 0, PCI_DEVFN( 0x14, 7)); + u32 sd_device_id = pci_read_config32( sd_dev, 0) >> 16; + /* turn off the SDHC controller in the PM reg */ + u8 reg8; + if (sd_device_id == PCI_DEVICE_ID_AMD_HUDSON_SD) { + reg8 = pm_read8(PM_HUD_SD_FLASH_CTRL); + reg8 &= ~BIT(0); + pm_write8(PM_HUD_SD_FLASH_CTRL, reg8); + } + else if (sd_device_id == PCI_DEVICE_ID_AMD_YANGTZE_SD) { + reg8 = pm_read8(PM_YANG_SD_FLASH_CTRL); + reg8 &= ~BIT(0); + pm_write8(PM_YANG_SD_FLASH_CTRL, reg8); + } + /* remove device 0:14.7 from PCI space */ + reg8 = pm_read8(PM_MANUAL_RESET); + reg8 &= ~BIT(6); + pm_write8(PM_MANUAL_RESET, reg8); + } + break; + default: + break; + } +} + +static void hudson_init_acpi_ports(void) +{ + /* We use some of these ports in SMM regardless of whether or not + * ACPI tables are generated. Enable these ports indiscriminately. + */ + + pm_write16(PM_EVT_BLK, ACPI_PM_EVT_BLK); + pm_write16(PM1_CNT_BLK, ACPI_PM1_CNT_BLK); + pm_write16(PM_TMR_BLK, ACPI_PM_TMR_BLK); + pm_write16(PM_GPE0_BLK, ACPI_GPE0_BLK); + /* CpuControl is in \_PR.CP00, 6 bytes */ + pm_write16(PM_CPU_CTRL, ACPI_CPU_CONTROL); + + if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) { + pm_write16(PM_ACPI_SMI_CMD, ACPI_SMI_CTL_PORT); + hudson_enable_acpi_cmd_smi(); + } else { + pm_write16(PM_ACPI_SMI_CMD, 0); + } + + /* AcpiDecodeEnable, When set, SB uses the contents of the PM registers + * at index 60-6B to decode ACPI I/O address. AcpiSmiEn & SmiCmdEn + */ + pm_write8(PM_ACPI_CONF, BIT(0) | BIT(1) | BIT(4) | BIT(2)); +} + +void hudson_init(void *chip_info) +{ + hudson_init_acpi_ports(); +} + +void hudson_final(void *chip_info) +{ +#if IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM) + agesawrapper_fchecfancontrolservice(); +#if !IS_ENABLED(CONFIG_ACPI_ENABLE_THERMAL_ZONE) + enable_imc_thermal_zone(); +#endif +#endif +} diff --git a/src/soc/amd/stoneyridge/ide.c b/src/soc/amd/stoneyridge/ide.c new file mode 100644 index 0000000000..49232085c8 --- /dev/null +++ b/src/soc/amd/stoneyridge/ide.c @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +static void ide_init(struct device *dev) +{ +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver ide_driver __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_IDE, +}; diff --git a/src/soc/amd/stoneyridge/imc.c b/src/soc/amd/stoneyridge/imc.c new file mode 100644 index 0000000000..b4e1d9d53a --- /dev/null +++ b/src/soc/amd/stoneyridge/imc.c @@ -0,0 +1,101 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define __SIMPLE_DEVICE__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VACPI_MMIO_VBASE ((u8 *)ACPI_MMIO_BASE) + +void imc_reg_init(void) +{ + u8 reg8; + /* Init Power Management Block 2 (PM2) Registers. + * Check BKDG for AMD Family 16h for details. */ + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x00), 0x06); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x01), 0x06); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x02), 0xf7); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x03), 0xff); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x04), 0xff); + + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x10), 0x06); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x11), 0x06); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x12), 0xf7); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x13), 0xff); + write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x14), 0xff); + + reg8 = pci_read_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4); + reg8 &= 0x8F; + reg8 |= 0x10; + pci_write_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4, reg8); +} + +#ifndef __PRE_RAM__ +void enable_imc_thermal_zone(void) +{ + AMD_CONFIG_PARAMS StdHeader; + UINT8 FunNum; + UINT8 regs[9]; + int i; + + regs[0] = 0; + regs[1] = 0; + FunNum = Fun_80; + for (i = 0; i <= 1; i++) + WriteECmsg(MSG_REG0 + i, AccessWidth8, ®s[i], &StdHeader); + WriteECmsg(MSG_SYS_TO_IMC, AccessWidth8, &FunNum, &StdHeader); + WaitForEcLDN9MailboxCmdAck(&StdHeader); + + for (i = 2; i <= 9; i++) + ReadECmsg(MSG_REG0 + i, AccessWidth8, ®s[i], &StdHeader); + + /* enable thermal zone 0 */ + regs[2] |= 1; + regs[0] = 0; + regs[1] = 0; + FunNum = Fun_81; + for (i = 0; i <= 9; i++) + WriteECmsg(MSG_REG0 + i, AccessWidth8, ®s[i], &StdHeader); + WriteECmsg(MSG_SYS_TO_IMC, AccessWidth8, &FunNum, &StdHeader); + WaitForEcLDN9MailboxCmdAck(&StdHeader); +} +#endif + +/* Bettong Hardware Monitor Fan Control + * Hardware limitation: + * HWM will fail to read the input temperature via I2C if other + * software switches the I2C address. AMD recommends using IMC + * to control fans, instead of HWM. + */ +void oem_fan_control(FCH_DATA_BLOCK *FchParams) +{ + /* Enable IMC fan control. the recommand way */ + imc_reg_init(); + + FchParams->Imc.ImcEnable = TRUE; + FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ + FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */ + + LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); +} diff --git a/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h b/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h new file mode 100644 index 0000000000..361c06f5b7 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AMD_PCI_INT_DEFS_H +#define AMD_PCI_INT_DEFS_H + +/* + * PIRQ and device routing - these define the index + * into the FCH PCI_INTR 0xC00/0xC01 interrupt + * routing table + */ + +#define PIRQ_NC 0x1F /* Not Used */ +#define PIRQ_A 0x00 /* INT A */ +#define PIRQ_B 0x01 /* INT B */ +#define PIRQ_C 0x02 /* INT C */ +#define PIRQ_D 0x03 /* INT D */ +#define PIRQ_E 0x04 /* INT E */ +#define PIRQ_F 0x05 /* INT F */ +#define PIRQ_G 0x06 /* INT G */ +#define PIRQ_H 0x07 /* INT H */ +#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */ +#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */ +#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */ +#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */ +#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */ +#define PIRQ_SIRQB 0x0D /* Serial IRQ INTB */ +#define PIRQ_SIRQC 0x0E /* Serial IRQ INTC */ +#define PIRQ_SIRQD 0x0F /* Serial IRQ INTD */ +#define PIRQ_SCI 0x10 /* SCI IRQ */ +#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */ +#define PIRQ_ASF 0x12 /* ASF */ +#define PIRQ_HDA 0x13 /* HDA 14h.2 */ +#define PIRQ_FC 0x14 /* FC */ +#define PIRQ_GEC 0x15 /* GEC */ +#define PIRQ_PMON 0x16 /* Performance Monitor */ +#define PIRQ_SD 0x17 /* SD */ +#define PIRQ_IMC0 0x20 /* IMC INT0 */ +#define PIRQ_IMC1 0x21 /* IMC INT1 */ +#define PIRQ_IMC2 0x22 /* IMC INT2 */ +#define PIRQ_IMC3 0x23 /* IMC INT3 */ +#define PIRQ_IMC4 0x24 /* IMC INT4 */ +#define PIRQ_IMC5 0x25 /* IMC INT5 */ +#define PIRQ_OHCI1 0x30 /* USB OHCI 12h.0 */ +#define PIRQ_EHCI1 0x31 /* USB EHCI 12h.2 */ +#define PIRQ_OHCI2 0x32 /* USB OHCI 13h.0 */ +#define PIRQ_EHCI2 0x33 /* USB EHCI 13h.2 */ +#define PIRQ_OHCI3 0x34 /* USB OHCI 16h.0 */ +#define PIRQ_EHCI3 0x35 /* USB EHCI 16h.2 */ +#define PIRQ_OHCI4 0x36 /* USB OHCI 14h.5 */ +#define PIRQ_IDE 0x40 /* IDE 14h.1 */ +#define PIRQ_SATA 0x41 /* SATA 11h.0 */ + +#define FCH_INT_TABLE_SIZE 0x76 +#define PIRQ_GPIO 0x62 /* GPIO Controller Interrupt */ +#define PIRQ_I2C0 0x70 +#define PIRQ_I2C1 0x71 +#define PIRQ_I2C2 0x72 +#define PIRQ_I2C3 0x73 +#define PIRQ_UART0 0x74 +#define PIRQ_UART1 0x75 + +#endif /* AMD_PCI_INT_DEFS_H */ diff --git a/src/soc/amd/stoneyridge/include/amd_pci_int_types.h b/src/soc/amd/stoneyridge/include/amd_pci_int_types.h new file mode 100644 index 0000000000..30ab0d4839 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/amd_pci_int_types.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AMD_PCI_INT_TYPES_H +#define AMD_PCI_INT_TYPES_H + +const char * intr_types[] = { + [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t", + [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD", + [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t", "PerMon\t", "SD\t\t", + [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t", + [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC", + [0x7F] = "RSVD\t", + [0x40] = "IDE\t", "SATA\t", + [0x50] = "GPPInt0\t", "GPPInt1\t", "GPPInt2\t", "GPPInt3\t", + [0x62] = "GPIO\t", + [0x70] = "I2C0\t", "I2C1\t", "I2C2\t","I2C3\t", "UART0\t", "UART1\t", +}; + +#endif /* AMD_PCI_INT_TYPES_H */ diff --git a/src/soc/amd/stoneyridge/include/soc/gpio.h b/src/soc/amd/stoneyridge/include/soc/gpio.h new file mode 100644 index 0000000000..22c0fba123 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/soc/gpio.h @@ -0,0 +1,131 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _STONEYRIDGE_GPIO_H_ +#define _STONEYRIDGE_GPIO_H_ + +#include +#include + +#define CROS_GPIO_DEVICE_NAME "AmdKern" + +#define GPIO_PIN_STS (1 << 16) +#define GPIO_OUTPUT_VALUE (1 << 22) +#define GPIO_OUTPUT_ENABLE (1 << 23) + +/* GPIO_0 - GPIO_62 */ +#define GPIO_BANK0_CONTROL (AMD_SB_ACPI_MMIO_ADDR + 0x1500) +#define GPIO_0 (GPIO_BANK0_CONTROL + 0x00) +#define GPIO_1 (GPIO_BANK0_CONTROL + 0x04) +#define GPIO_2 (GPIO_BANK0_CONTROL + 0x08) +#define GPIO_3 (GPIO_BANK0_CONTROL + 0x0C) +#define GPIO_4 (GPIO_BANK0_CONTROL + 0x10) +#define GPIO_5 (GPIO_BANK0_CONTROL + 0x14) +#define GPIO_6 (GPIO_BANK0_CONTROL + 0x18) +#define GPIO_7 (GPIO_BANK0_CONTROL + 0x1C) +#define GPIO_8 (GPIO_BANK0_CONTROL + 0x20) +#define GPIO_9 (GPIO_BANK0_CONTROL + 0x24) +#define GPIO_10 (GPIO_BANK0_CONTROL + 0x28) +#define GPIO_11 (GPIO_BANK0_CONTROL + 0x2C) +#define GPIO_12 (GPIO_BANK0_CONTROL + 0x30) +#define GPIO_13 (GPIO_BANK0_CONTROL + 0x34) +#define GPIO_14 (GPIO_BANK0_CONTROL + 0x38) +#define GPIO_15 (GPIO_BANK0_CONTROL + 0x3C) +#define GPIO_16 (GPIO_BANK0_CONTROL + 0x40) +#define GPIO_17 (GPIO_BANK0_CONTROL + 0x44) +#define GPIO_18 (GPIO_BANK0_CONTROL + 0x48) +#define GPIO_19 (GPIO_BANK0_CONTROL + 0x4C) +#define GPIO_20 (GPIO_BANK0_CONTROL + 0x50) +#define GPIO_21 (GPIO_BANK0_CONTROL + 0x54) +#define GPIO_22 (GPIO_BANK0_CONTROL + 0x58) +#define GPIO_23 (GPIO_BANK0_CONTROL + 0x5C) +#define GPIO_24 (GPIO_BANK0_CONTROL + 0x60) +#define GPIO_25 (GPIO_BANK0_CONTROL + 0x64) +#define GPIO_26 (GPIO_BANK0_CONTROL + 0x68) +#define GPIO_39 (GPIO_BANK0_CONTROL + 0x9C) +#define GPIO_42 (GPIO_BANK0_CONTROL + 0xA8) + +/* GPIO_64 - GPIO_127 */ +#define GPIO_BANK1 (CONTROL AMD_SB_ACPI_MMIO_ADDR + 0x1600) +#define GPIO_64 (GPIO_BANK1_CONTROL + 0x00) +#define GPIO_65 (GPIO_BANK1_CONTROL + 0x04) +#define GPIO_66 (GPIO_BANK1_CONTROL + 0x08) +#define GPIO_67 (GPIO_BANK1_CONTROL + 0x0C) +#define GPIO_68 (GPIO_BANK1_CONTROL + 0x10) +#define GPIO_69 (GPIO_BANK1_CONTROL + 0x14) +#define GPIO_70 (GPIO_BANK1_CONTROL + 0x18) +#define GPIO_71 (GPIO_BANK1_CONTROL + 0x1C) +#define GPIO_72 (GPIO_BANK1_CONTROL + 0x20) +#define GPIO_74 (GPIO_BANK1_CONTROL + 0x28) +#define GPIO_75 (GPIO_BANK1_CONTROL + 0x2C) +#define GPIO_76 (GPIO_BANK1_CONTROL + 0x30) +#define GPIO_84 (GPIO_BANK1_CONTROL + 0x50) +#define GPIO_85 (GPIO_BANK1_CONTROL + 0x54) +#define GPIO_86 (GPIO_BANK1_CONTROL + 0x58) +#define GPIO_87 (GPIO_BANK1_CONTROL + 0x5C) +#define GPIO_88 (GPIO_BANK1_CONTROL + 0x60) +#define GPIO_89 (GPIO_BANK1_CONTROL + 0x64) +#define GPIO_90 (GPIO_BANK1_CONTROL + 0x68) +#define GPIO_91 (GPIO_BANK1_CONTROL + 0x6C) +#define GPIO_92 (GPIO_BANK1_CONTROL + 0x70) +#define GPIO_93 (GPIO_BANK1_CONTROL + 0x74) +#define GPIO_95 (GPIO_BANK1_CONTROL + 0x7C) +#define GPIO_96 (GPIO_BANK1_CONTROL + 0x80) +#define GPIO_97 (GPIO_BANK1_CONTROL + 0x84) +#define GPIO_98 (GPIO_BANK1_CONTROL + 0x88) +#define GPIO_99 (GPIO_BANK1_CONTROL + 0x8C) +#define GPIO_100 (GPIO_BANK1_CONTROL + 0x90) +#define GPIO_101 (GPIO_BANK1_CONTROL + 0x94) +#define GPIO_102 (GPIO_BANK1_CONTROL + 0x98) +#define GPIO_113 (GPIO_BANK1_CONTROL + 0xC4) +#define GPIO_114 (GPIO_BANK1_CONTROL + 0xC8) +#define GPIO_115 (GPIO_BANK1_CONTROL + 0xCC) +#define GPIO_116 (GPIO_BANK1_CONTROL + 0xD0) +#define GPIO_117 (GPIO_BANK1_CONTROL + 0xD4) +#define GPIO_118 (GPIO_BANK1_CONTROL + 0xD8) +#define GPIO_119 (GPIO_BANK1_CONTROL + 0xDC) +#define GPIO_120 (GPIO_BANK1_CONTROL + 0xE0) +#define GPIO_121 (GPIO_BANK1_CONTROL + 0xE4) +#define GPIO_122 (GPIO_BANK1_CONTROL + 0xE8) +#define GPIO_126 (GPIO_BANK1_CONTROL + 0xF8) + +/* GPIO_128 - GPIO_183 */ +#define GPIO_BANK2_CONTROL (AMD_SB_ACPI_MMIO_ADDR + 0x1700) +#define GPIO_129 (GPIO_BANK2_CONTROL + 0x04) +#define GPIO_130 (GPIO_BANK2_CONTROL + 0x08) +#define GPIO_131 (GPIO_BANK2_CONTROL + 0x0C) +#define GPIO_132 (GPIO_BANK2_CONTROL + 0x10) +#define GPIO_133 (GPIO_BANK2_CONTROL + 0x14) +#define GPIO_134 (GPIO_BANK2_CONTROL + 0x18) +#define GPIO_135 (GPIO_BANK2_CONTROL + 0x1C) +#define GPIO_136 (GPIO_BANK2_CONTROL + 0x20) +#define GPIO_137 (GPIO_BANK2_CONTROL + 0x24) +#define GPIO_138 (GPIO_BANK2_CONTROL + 0x28) +#define GPIO_139 (GPIO_BANK2_CONTROL + 0x2C) +#define GPIO_140 (GPIO_BANK2_CONTROL + 0x30) +#define GPIO_141 (GPIO_BANK2_CONTROL + 0x34) +#define GPIO_142 (GPIO_BANK2_CONTROL + 0x38) +#define GPIO_143 (GPIO_BANK2_CONTROL + 0x3C) +#define GPIO_144 (GPIO_BANK2_CONTROL + 0x40) +#define GPIO_145 (GPIO_BANK2_CONTROL + 0x44) +#define GPIO_146 (GPIO_BANK2_CONTROL + 0x48) +#define GPIO_147 (GPIO_BANK2_CONTROL + 0x4C) +#define GPIO_148 (GPIO_BANK2_CONTROL + 0x50) + +typedef uint32_t gpio_t; + +int gpio_get(gpio_t gpio_num); + +#endif /* _STONEYRIDGE_GPIO_H_ */ diff --git a/src/soc/amd/stoneyridge/include/soc/hudson.h b/src/soc/amd/stoneyridge/include/soc/hudson.h new file mode 100644 index 0000000000..bfe506edd1 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/soc/hudson.h @@ -0,0 +1,198 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef STONEYRIDGE_H +#define STONEYRIDGE_H + +#include +#include +#include +#include +#include "chip.h" + +/* Offsets from ACPI_MMIO_BASE + * This is defined by AGESA, but we don't include AGESA headers to avoid + * polluting the namespace. + */ +#define PM_MMIO_BASE 0xfed80300 + +/* Power management index/data registers */ +#define BIOSRAM_INDEX 0xcd4 +#define BIOSRAM_DATA 0xcd5 +#define PM_INDEX 0xcd6 +#define PM_DATA 0xcd7 +#define PM2_INDEX 0xcd0 +#define PM2_DATA 0xcd1 + +#define PM_ACPI_MMIO_EN 0x24 +#define PM_SERIRQ_CONF 0x54 +#define PM_EVT_BLK 0x60 +#define PM1_CNT_BLK 0x62 +#define PM_TMR_BLK 0x64 +#define PM_CPU_CTRL 0x66 +#define PM_GPE0_BLK 0x68 +#define PM_ACPI_SMI_CMD 0x6A +#define PM_ACPI_CONF 0x74 +#define PM_PMIO_DEBUG 0xD2 +#define PM_MANUAL_RESET 0xD3 +#define PM_HUD_SD_FLASH_CTRL 0xE7 +#define PM_YANG_SD_FLASH_CTRL 0xE8 +#define PM_PCIB_CFG 0xEA + +#define STONEYRIDGE_ACPI_IO_BASE CONFIG_STONEYRIDGE_ACPI_IO_BASE +#define ACPI_PM_EVT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x04) /* 2 bytes */ +#define ACPI_PM_TMR_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTROL (STONEYRIDGE_ACPI_IO_BASE + 0x08) /* 6 bytes */ + +#define ACPI_SMI_CTL_PORT 0xb2 +#define ACPI_SMI_CMD_CST_CONTROL 0xde +#define ACPI_SMI_CMD_PST_CONTROL 0xad +#define ACPI_SMI_CMD_DISABLE 0xbe +#define ACPI_SMI_CMD_ENABLE 0xef +#define ACPI_SMI_CMD_S4_REQ 0xc0 + +#define REV_STONEYRIDGE_A11 0x11 +#define REV_STONEYRIDGE_A12 0x12 + +#define SPIROM_BASE_ADDRESS_REGISTER 0xA0 +#define ROUTE_TPM_2_SPI BIT(3) +#define SPI_ROM_ENABLE 0x02 +#define SPI_BASE_ADDRESS 0xFEC10000 + +#define LPC_IO_PORT_DECODE_ENABLE 0x44 +#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0) +#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1) +#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2) +#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3) +#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4) +#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5) +#define DECODE_ENABLE_SERIAL_PORT0 BIT(6) +#define DECODE_ENABLE_SERIAL_PORT1 BIT(7) +#define DECODE_ENABLE_SERIAL_PORT2 BIT(8) +#define DECODE_ENABLE_SERIAL_PORT3 BIT(9) +#define DECODE_ENABLE_SERIAL_PORT4 BIT(10) +#define DECODE_ENABLE_SERIAL_PORT5 BIT(11) +#define DECODE_ENABLE_SERIAL_PORT6 BIT(12) +#define DECODE_ENABLE_SERIAL_PORT7 BIT(13) +#define DECODE_ENABLE_AUDIO_PORT0 BIT(14) +#define DECODE_ENABLE_AUDIO_PORT1 BIT(15) +#define DECODE_ENABLE_AUDIO_PORT2 BIT(16) +#define DECODE_ENABLE_AUDIO_PORT3 BIT(17) +#define DECODE_ENABLE_MIDI_PORT0 BIT(18) +#define DECODE_ENABLE_MIDI_PORT1 BIT(19) +#define DECODE_ENABLE_MIDI_PORT2 BIT(20) +#define DECODE_ENABLE_MIDI_PORT3 BIT(21) +#define DECODE_ENABLE_MSS_PORT0 BIT(22) +#define DECODE_ENABLE_MSS_PORT1 BIT(23) +#define DECODE_ENABLE_MSS_PORT2 BIT(24) +#define DECODE_ENABLE_MSS_PORT3 BIT(25) +#define DECODE_ENABLE_FDC_PORT0 BIT(26) +#define DECODE_ENABLE_FDC_PORT1 BIT(27) +#define DECODE_ENABLE_GAME_PORT BIT(28) +#define DECODE_ENABLE_KBC_PORT BIT(29) +#define DECODE_ENABLE_ACPIUC_PORT BIT(30) +#define DECODE_ENABLE_ADLIB_PORT BIT(31) + +#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48 +#define LPC_WIDEIO2_ENABLE BIT(25) +#define LPC_WIDEIO1_ENABLE BIT(24) +#define LPC_WIDEIO0_ENABLE BIT(2) + +#define LPC_WIDEIO_GENERIC_PORT 0x64 + +#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74 +#define LPC_ALT_WIDEIO2_ENABLE BIT(3) +#define LPC_ALT_WIDEIO1_ENABLE BIT(2) +#define LPC_ALT_WIDEIO0_ENABLE BIT(0) + +#define LPC_WIDEIO2_GENERIC_PORT 0x90 + +#define SPI_CNTRL0 0x00 +#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18)) +/* Nominal is 16.7MHz on older devices, 33MHz on newer */ +#define SPI_READ_MODE_NOM 0x00000000 +#define SPI_READ_MODE_DUAL112 ( BIT(29) ) +#define SPI_READ_MODE_QUAD114 ( BIT(29) | BIT(18)) +#define SPI_READ_MODE_DUAL122 (BIT(30) ) +#define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18)) +#define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) ) +/* Nominal and SPI_READ_MODE_FAST_HUDSON1 are the only valid choices for H1 */ +#define SPI_READ_MODE_FAST_HUDSON1 ( BIT(18)) +#define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18)) +#define SPI_ARB_ENABLE BIT(19) + +#define SPI_CNTRL1 0x0c +/* Use SPI_SPEED_16M-SPI_SPEED_66M below for hudson and bolton */ +#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12)) +#define SPI_NORM_SPEED_SH 12 +#define SPI_FAST_SPEED_SH 8 + +#define SPI100_ENABLE 0x20 +#define SPI_USE_SPI100 BIT(0) + +#define SPI100_SPEED_CONFIG 0x22 +#define SPI_SPEED_66M (0x0) +#define SPI_SPEED_33M ( BIT(0)) +#define SPI_SPEED_22M ( BIT(1) ) +#define SPI_SPEED_16M ( BIT(1) | BIT(0)) +#define SPI_SPEED_100M (BIT(2) ) +#define SPI_SPEED_800K (BIT(2) | BIT(0)) +#define SPI_NORM_SPEED_NEW_SH 12 +#define SPI_FAST_SPEED_NEW_SH 8 +#define SPI_ALT_SPEED_NEW_SH 4 +#define SPI_TPM_SPEED_NEW_SH 0 + +#define SPI100_HOST_PREF_CONFIG 0x2c +#define SPI_RD4DW_EN_HOST BIT(15) + +static inline int hudson_sata_enable(void) +{ + /* True if IDE or AHCI. */ + return (CONFIG_STONEYRIDGE_SATA_MODE == 0) || (CONFIG_STONEYRIDGE_SATA_MODE == 2); +} + +static inline int hudson_ide_enable(void) +{ + /* True if IDE or LEGACY IDE. */ + return (CONFIG_STONEYRIDGE_SATA_MODE == 0) || (CONFIG_STONEYRIDGE_SATA_MODE == 3); +} + +void configure_hudson_uart(void); +void hudson_clk_output_48Mhz(void); +void hudson_disable_4dw_burst(void); +void hudson_enable(device_t dev); +void hudson_final(void *chip_info); +void hudson_init(void *chip_info); +void hudson_lpc_port80(void); +void hudson_lpc_decode(void); +void hudson_pci_port80(void); +void hudson_read_mode(u32 mode); +void hudson_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm); +void hudson_set_readspeed(u16 norm, u16 fast); +void hudson_tpm_decode_spi(void); +void lpc_wideio_512_window(uint16_t base); +void lpc_wideio_16_window(uint16_t base); +u8 pm_read8(u8 reg); +u16 pm_read16(u16 reg); +void pm_write8(u8 reg, u8 value); +void pm_write16(u8 reg, u16 value); +int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos); +void s3_resume_init_data(void *FchParams); +int s3_save_nvram_early(u32 dword, int size, int nvram_pos); + +#endif /* STONEYRIDGE_H */ diff --git a/src/soc/amd/stoneyridge/include/soc/imc.h b/src/soc/amd/stoneyridge/include/soc/imc.h new file mode 100644 index 0000000000..3d0e7406c2 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/soc/imc.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef STONEYRIDGE_IMC_H +#define STONEYRIDGE_IMC_H + +#include +#include +#include + +void imc_reg_init(void); +void enable_imc_thermal_zone(void); +void oem_fan_control(FCH_DATA_BLOCK *FchParams); + +#endif diff --git a/src/soc/amd/stoneyridge/include/soc/pci_devs.h b/src/soc/amd/stoneyridge/include/soc/pci_devs.h new file mode 100644 index 0000000000..cfd79d8da1 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/soc/pci_devs.h @@ -0,0 +1,122 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PI_STONEYRIDGE_PCI_DEVS_H_ +#define _PI_STONEYRIDGE_PCI_DEVS_H_ + +#define BUS0 0 + +/* XHCI */ +#define XHCI_DEV 0x10 +#define XHCI_FUNC 0 +#define XHCI_DEVID 0x7814 +#define XHCI_DEVFN PCI_DEVFN(XHCI_DEV,XHCI_FUNC) + +#define XHCI2_DEV 0x10 +#define XHCI2_FUNC 1 +#define XHCI2_DEVID 0x7814 +#define XHCI2_DEVFN PCI_DEVFN(XHCI2_DEV,XHCI2_FUNC) + +/* SATA */ +#define SATA_DEV 0x11 +#define SATA_FUNC 0 +#define SATA_IDE_DEVID 0x7800 +#define AHCI_DEVID_MS 0x7801 +#define AHCI_DEVID_AMD 0x7804 +#define SATA_DEVFN PCI_DEVFN(SATA_DEV,SATA_FUNC) + +/* OHCI */ +#define OHCI1_DEV 0x12 +#define OHCI1_FUNC 0 +#define OHCI2_DEV 0x13 +#define OHCI2_FUNC 0 +#define OHCI3_DEV 0x16 +#define OHCI3_FUNC 0 +#define OHCI4_DEV 0x14 +#define OHCI4_FUNC 5 +#define OHCI_DEVID 0x7807 +#define OHCI1_DEVFN PCI_DEVFN(OHCI1_DEV,OHCI1_FUNC) +#define OHCI2_DEVFN PCI_DEVFN(OHCI2_DEV,OHCI2_FUNC) +#define OHCI3_DEVFN PCI_DEVFN(OHCI3_DEV,OHCI3_FUNC) +#define OHCI4_DEVFN PCI_DEVFN(OHCI4_DEV,OHCI4_FUNC) + +/* EHCI */ +#define EHCI1_DEV 0x12 +#define EHCI1_FUNC 2 +#define EHCI2_DEV 0x13 +#define EHCI2_FUNC 2 +#define EHCI3_DEV 0x16 +#define EHCI3_FUNC 2 +#define EHCI_DEVID 0x7808 +#define EHCI1_DEVFN PCI_DEVFN(EHCI1_DEV,EHCI1_FUNC) +#define EHCI2_DEVFN PCI_DEVFN(EHCI2_DEV,EHCI2_FUNC) +#define EHCI3_DEVFN PCI_DEVFN(EHCI3_DEV,EHCI3_FUNC) + +/* SMBUS */ +#define SMBUS_DEV 0x14 +#define SMBUS_FUNC 0 +#define SMBUS_DEVID 0x780B +#define SMBUS_DEVFN PCI_DEVFN(SMBUS_DEV,SMBUS_FUNC) + +/* IDE */ +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON) +#define IDE_DEV 0x14 +#define IDE_FUNC 1 +#define IDE_DEVID 0x780C +#define IDE_DEVFN PCI_DEVFN(IDE_DEV,IDE_FUNC) +#endif + +/* HD Audio */ +#define HDA_DEV 0x14 +#define HDA_FUNC 2 +#define HDA_DEVID 0x780D +#define HDA_DEVFN PCI_DEVFN(HDA_DEV,HDA_FUNC) + +/* LPC BUS */ +#define PCU_DEV 0x14 +#define LPC_FUNC 3 +#define LPC_DEVID 0x780E +#define LPC_DEVFN PCI_DEVFN(LPC_DEV,LPC_FUNC) + +/* PCI Ports */ +#define SB_PCI_PORT_DEV 0x14 +#define SB_PCI_PORT_FUNC 4 +#define SB_PCI_PORT_DEVID 0x780F +#define SB_PCI_PORT_DEVFN PCI_DEVFN(SB_PCI_PORT_DEV,SB_PCI_PORT_FUNC) + +/* SD Controller */ +#define SD_DEV 0x14 +#define SD_FUNC 7 +#define SD_DEVID 0x7806 +#define SD_DEVFN PCI_DEVFN(SD_DEV,SD_FUNC) + +/* PCIe Ports */ +#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON) +#define SB_PCIE_DEV 0x15 +#define SB_PCIE_PORT1_FUNC 0 +#define SB_PCIE_PORT2_FUNC 1 +#define SB_PCIE_PORT3_FUNC 2 +#define SB_PCIE_PORT4_FUNC 3 +#define SB_PCIE_PORT1_DEVID 0x7820 +#define SB_PCIE_PORT2_DEVID 0x7821 +#define SB_PCIE_PORT3_DEVID 0x7822 +#define SB_PCIE_PORT4_DEVID 0x7823 +#define SB_PCIE_PORT1_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT1_FUNC) +#define SB_PCIE_PORT2_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT2_FUNC) +#define SB_PCIE_PORT3_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT3_FUNC) +#define SB_PCIE_PORT4_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT4_FUNC) +#endif + +#endif /* _PI_STONEYRIDGE_PCI_DEVS_H_ */ diff --git a/src/soc/amd/stoneyridge/include/soc/smbus.h b/src/soc/amd/stoneyridge/include/soc/smbus.h new file mode 100644 index 0000000000..d4499fced0 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/soc/smbus.h @@ -0,0 +1,70 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef STONEYRIDGE_SMBUS_H +#define STONEYRIDGE_SMBUS_H + +#include + +#define SMBHSTSTAT 0x0 +#define SMBSLVSTAT 0x1 +#define SMBHSTCTRL 0x2 +#define SMBHSTCMD 0x3 +#define SMBHSTADDR 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBHSTBLKDAT 0x7 +#define SMBSLVCTRL 0x8 +#define SMBSLVCMD_SHADOW 0x9 +#define SMBSLVEVT 0xa +#define SMBSLVDAT 0xc + +#define AX_INDXC 0 +#define AX_INDXP 2 +#define AXCFG 4 +#define ABCFG 6 +#define RC_INDXC 1 +#define RC_INDXP 3 + +#define AB_INDX 0xCD8 +#define AB_DATA (AB_INDX+4) + +/* Between 1-10 seconds, We should never timeout normally + * Longer than this is just painful when a timeout condition occurs. + */ +#define SMBUS_TIMEOUT (100 * 1000 * 10) + +#define abcfg_reg(reg, mask, val) \ + alink_ab_indx((ABCFG), (reg), (mask), (val)) +#define axcfg_reg(reg, mask, val) \ + alink_ab_indx((AXCFG), (reg), (mask), (val)) +#define axindxc_reg(reg, mask, val) \ + alink_ax_indx((AX_INDXC), (reg), (mask), (val)) +#define axindxp_reg(reg, mask, val) \ + alink_ax_indx((AX_INDXP), (reg), (mask), (val)) +#define rcindxc_reg(reg, port, mask, val) \ + alink_rc_indx((RC_INDXC), (reg), (port), (mask), (val)) +#define rcindxp_reg(reg, port, mask, val) \ + alink_rc_indx((RC_INDXP), (reg), (port), (mask), (val)) + +int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); +int do_smbus_recv_byte(u32 smbus_io_base, u32 device); +int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val); +void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val); +void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val); +void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val); + +#endif /* STONEYRIDGE_SMBUS_H */ diff --git a/src/soc/amd/stoneyridge/include/soc/smi.h b/src/soc/amd/stoneyridge/include/soc/smi.h new file mode 100644 index 0000000000..7a3c804452 --- /dev/null +++ b/src/soc/amd/stoneyridge/include/soc/smi.h @@ -0,0 +1,65 @@ +/* + * Utilities for SMI handlers and SMM setup + * + * Copyright (C) 2014 Alexandru Gagniuc + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + +#ifndef _SOUTHBRIDGE_AMD_PI_STONEYRIDGE_SMI_H +#define _SOUTHBRIDGE_AMD_PI_STONEYRIDGE_SMI_H + +#include + +/* ACPI_MMIO_BASE + 0x200 -- leave this string here so grep catches it. + * This is defined by AGESA, but we dpn't include AGESA headers to avoid + * polluting the namesace. + */ +#define SMI_BASE 0xfed80200 + +#define SMI_REG_SMITRIG0 0x98 +#define SMITRG0_EOS (1 << 28) +#define SMITRG0_SMIENB (1 << 31) + +#define SMI_REG_CONTROL0 0xa0 + +enum smi_mode { + SMI_MODE_DISABLE = 0, + SMI_MODE_SMI = 1, + SMI_MODE_NMI = 2, + SMI_MODE_IRQ13 = 3, +}; + +enum smi_lvl { + SMI_LVL_LOW = 0, + SMI_LVL_HIGH = 1, +}; + +static inline uint32_t smi_read32(uint8_t offset) +{ + return read32((void *)(SMI_BASE + offset)); +} + +static inline void smi_write32(uint8_t offset, uint32_t value) +{ + write32((void *)(SMI_BASE + offset), value); +} + +static inline uint16_t smi_read16(uint8_t offset) +{ + return read16((void *)(SMI_BASE + offset)); +} + +static inline void smi_write16(uint8_t offset, uint16_t value) +{ + write16((void *)(SMI_BASE + offset), value); +} + +void hudson_configure_gevent_smi(uint8_t gevent, uint8_t mode, uint8_t level); +void hudson_disable_gevent_smi(uint8_t gevent); +void hudson_enable_acpi_cmd_smi(void); + +#ifndef __SMM__ +void hudson_enable_smi_generation(void); +#endif + +#endif /* _SOUTHBRIDGE_AMD_PI_STONEYRIDGE_SMI_H */ diff --git a/src/soc/amd/stoneyridge/lpc.c b/src/soc/amd/stoneyridge/lpc.c new file mode 100644 index 0000000000..b2ee843991 --- /dev/null +++ b/src/soc/amd/stoneyridge/lpc.c @@ -0,0 +1,366 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void lpc_init(device_t dev) +{ + u8 byte; + u32 dword; + device_t sm_dev; + + /* Enable the LPC Controller */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + dword = pci_read_config32(sm_dev, 0x64); + dword |= 1 << 20; + pci_write_config32(sm_dev, 0x64, dword); + + /* Initialize isa dma */ + isa_dma_init(); + + /* Enable DMA transaction on the LPC bus */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + + /* Disable the timeout mechanism on LPC */ + byte = pci_read_config8(dev, 0x48); + byte &= ~(1 << 7); + pci_write_config8(dev, 0x48, byte); + + /* Disable LPC MSI Capability */ + byte = pci_read_config8(dev, 0x78); + byte &= ~(1 << 1); + byte &= ~(1 << 0); /* Keep the old way. i.e., when bus master/DMA cycle is going + on on LPC, it holds PCI grant, so no LPC slave cycle can + interrupt and visit LPC. */ + pci_write_config8(dev, 0x78, byte); + + /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads code from SPI ROM */ + /* bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12. */ + byte = pci_read_config8(dev, 0xBB); + byte |= 1 << 0 | 1 << 3; + pci_write_config8(dev, 0xBB, byte); + + cmos_check_update_date(); + + /* Initialize the real time clock. + * The 0 argument tells cmos_init not to + * update CMOS unless it is invalid. + * 1 tells cmos_init to always initialize the CMOS. + */ + if (IS_ENABLED(CONFIG_VBOOT_VBNV_CMOS)) + init_vbnv_cmos(0); + else + cmos_init(0); + + /* Initialize i8259 pic */ + setup_i8259 (); + + /* Initialize i8254 timers */ + setup_i8254 (); + + /* Set up SERIRQ, enable continuous mode */ + byte = (BIT(4) | BIT(7)); + if (!IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)) + byte |= BIT(6); + + pm_write8(PM_SERIRQ_CONF, byte); +} + +static void hudson_lpc_read_resources(device_t dev) +{ + struct resource *res; + + /* Get the normal pci resources of this device */ + pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* Add a memory resource for the SPI BAR. */ + fixed_mem_resource(dev, 2, SPI_BASE_ADDRESS / 1024, 1, IORESOURCE_SUBTRACTIVE); + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = IO_APIC_ADDR; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + compact_resources(dev); +} + +static void hudson_lpc_set_resources(struct device *dev) +{ + struct resource *res; + u32 spi_enable_bits; + + /* Special case. The SpiRomEnable and other enables should STAY set. */ + res = find_resource(dev, 2); + spi_enable_bits = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER); + spi_enable_bits &= 0xF; + pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, res->base | spi_enable_bits); + + pci_dev_set_resources(dev); +} + +/** + * @brief Enable resources for children devices + * + * @param dev the device whose children's resources are to be enabled + * + */ +static void hudson_lpc_enable_childrens_resources(device_t dev) +{ + struct bus *link; + u32 reg, reg_x; + int var_num = 0; + u16 reg_var[3]; + u16 reg_size[1] = {512}; + u8 wiosize = pci_read_config8(dev, 0x74); + + /* Be bit relaxed, tolerate that LPC region might be bigger than resource we try to fit, + * do it like this for all regions < 16 bytes. If there is a resource > 16 bytes + * it must be 512 bytes to be able to allocate the fresh LPC window. + * + * AGESA likes to enable already one LPC region in wide port base 0x64-0x65, + * using DFLT_SIO_PME_BASE_ADDRESS, 512 bytes size + * The code tries to check if resource can fit into this region + */ + + reg = pci_read_config32(dev, 0x44); + reg_x = pci_read_config32(dev, 0x48); + + /* check if ranges are free and not use them if entry is just already taken */ + if (reg_x & (1 << 2)) + var_num = 1; + /* just in case check if someone did not manually set other ranges too */ + if (reg_x & (1 << 24)) + var_num = 2; + + if (reg_x & (1 << 25)) + var_num = 3; + + /* check AGESA region size */ + if (wiosize & (1 << 0)) + reg_size[0] = 16; + + reg_var[2] = pci_read_config16(dev, 0x90); + reg_var[1] = pci_read_config16(dev, 0x66); + reg_var[0] = pci_read_config16(dev, 0x64); + + for (link = dev->link_list; link; link = link->next) { + device_t child; + for (child = link->children; child; + child = child->sibling) { + if (child->enabled + && (child->path.type == DEVICE_PATH_PNP)) { + struct resource *res; + for (res = child->resource_list; res; res = res->next) { + u32 base, end; /* don't need long long */ + u32 rsize, set = 0, set_x = 0; + if (!(res->flags & IORESOURCE_IO)) + continue; + base = res->base; + end = resource_end(res); + /* find a resource size */ + printk(BIOS_DEBUG, "hudson lpc decode:%s, base=0x%08x, end=0x%08x\n", + dev_path(child), base, end); + switch (base) { + case 0x60: /* KB */ + case 0x64: /* MS */ + set |= (1 << 29); + rsize = 1; + break; + case 0x3f8: /* COM1 */ + set |= (1 << 6); + rsize = 8; + break; + case 0x2f8: /* COM2 */ + set |= (1 << 7); + rsize = 8; + break; + case 0x378: /* Parallel 1 */ + set |= (1 << 0); + set |= (1 << 1); /* + 0x778 for ECP */ + rsize = 8; + break; + case 0x3f0: /* FD0 */ + set |= (1 << 26); + rsize = 8; + break; + case 0x220: /* 0x220 - 0x227 */ + set |= (1 << 8); + rsize = 8; + break; + case 0x228: /* 0x228 - 0x22f */ + set |= (1 << 9); + rsize = 8; + break; + case 0x238: /* 0x238 - 0x23f */ + set |= (1 << 10); + rsize = 8; + break; + case 0x300: /* 0x300 -0x301 */ + set |= (1 << 18); + rsize = 2; + break; + case 0x400: + set_x |= (1 << 16); + rsize = 0x40; + break; + case 0x480: + set_x |= (1 << 17); + rsize = 0x40; + break; + case 0x500: + set_x |= (1 << 18); + rsize = 0x40; + break; + case 0x580: + set_x |= (1 << 19); + rsize = 0x40; + break; + case 0x4700: + set_x |= (1 << 22); + rsize = 0xc; + break; + case 0xfd60: + set_x |= (1 << 23); + rsize = 16; + break; + default: + rsize = 0; + /* try AGESA allocated region in region 0 */ + if ((var_num > 0) && ((base >=reg_var[0]) && + ((base + res->size) <= (reg_var[0] + reg_size[0])))) + rsize = reg_size[0]; + } + /* check if region found and matches the enable */ + if (res->size <= rsize) { + reg |= set; + reg_x |= set_x; + /* check if we can fit resource in variable range */ + } else if ((var_num < 3) && + ((res->size <= 16) || (res->size == 512))) { + /* use variable ranges if pre-defined do not match */ + switch (var_num) { + case 0: + reg_x |= (1 << 2); + if (res->size <= 16) { + wiosize |= (1 << 0); + } + break; + case 1: + reg_x |= (1 << 24); + if (res->size <= 16) + wiosize |= (1 << 2); + break; + case 2: + reg_x |= (1 << 25); + if (res->size <= 16) + wiosize |= (1 << 3); + break; + } + reg_var[var_num++] = + base & 0xffff; + } else { + printk(BIOS_ERR, "cannot fit LPC decode region:%s, base=0x%08x, end=0x%08x\n", + dev_path(child), base, end); + } + } + } + } + } + pci_write_config32(dev, 0x44, reg); + pci_write_config32(dev, 0x48, reg_x); + /* Set WideIO for as many IOs found (fall through is on purpose) */ + switch (var_num) { + case 3: + pci_write_config16(dev, 0x90, reg_var[2]); + /* fall through */ + case 2: + pci_write_config16(dev, 0x66, reg_var[1]); + /* fall through */ + case 1: + pci_write_config16(dev, 0x64, reg_var[0]); + break; + } + pci_write_config8(dev, 0x74, wiosize); +} + +static void hudson_lpc_enable_resources(device_t dev) +{ + pci_dev_enable_resources(dev); + hudson_lpc_enable_childrens_resources(dev); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations lpc_ops = { + .read_resources = hudson_lpc_read_resources, + .set_resources = hudson_lpc_set_resources, + .enable_resources = hudson_lpc_enable_resources, +#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES) + .write_acpi_tables = acpi_write_hpet, +#endif + .init = lpc_init, + .scan_bus = scan_lpc_bus, + .ops_pci = &lops_pci, +}; + +static const unsigned short pci_device_ids[] = { + PCI_DEVICE_ID_AMD_SB900_LPC, + PCI_DEVICE_ID_AMD_CZ_LPC, + 0 +}; +static const struct pci_driver lpc_driver __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_AMD, + .devices = pci_device_ids, +}; diff --git a/src/soc/amd/stoneyridge/pci.c b/src/soc/amd/stoneyridge/pci.c new file mode 100644 index 0000000000..61d7a39a97 --- /dev/null +++ b/src/soc/amd/stoneyridge/pci.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static void pci_init(struct device *dev) +{ +} + +/* + * Update the PCI devices with a valid IRQ number + * that is set in the mainboard PCI_IRQ structures. + */ +static void set_pci_irqs(void *unused) +{ + /* Write PCI_INTR regs 0xC00/0xC01 */ + write_pci_int_table(); + + /* Write IRQs for all devicetree enabled devices */ + write_pci_cfg_irqs(); +} + +/* + * Hook this function into the PCI state machine + * on entry into BS_DEV_ENABLE. + */ +BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, set_pci_irqs, NULL); + +static struct pci_operations lops_pci = { + .set_subsystem = 0, +}; + +static struct device_operations pci_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pci_init, + .scan_bus = pci_scan_bridge, + .reset_bus = pci_bus_reset, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver pci_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_PCI, +}; diff --git a/src/soc/amd/stoneyridge/pcie.c b/src/soc/amd/stoneyridge/pcie.c new file mode 100644 index 0000000000..92b0a50a1b --- /dev/null +++ b/src/soc/amd/stoneyridge/pcie.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +static void pcie_init(struct device *dev) +{ +} + +static struct pci_operations lops_pci = { + .set_subsystem = 0, +}; + +static struct device_operations pci_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pcie_init, + .scan_bus = pci_scan_bridge, + .reset_bus = pci_bus_reset, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver pciea_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_PCIEA, +}; + +static const struct pci_driver pcieb_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_PCIEB, +}; +static const struct pci_driver pciec_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_PCIEC, +}; +static const struct pci_driver pcied_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_PCIED, +}; diff --git a/src/soc/amd/stoneyridge/reset.c b/src/soc/amd/stoneyridge/reset.c new file mode 100644 index 0000000000..e44a886382 --- /dev/null +++ b/src/soc/amd/stoneyridge/reset.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Use simple device model for this file even in ramstage +#define __SIMPLE_DEVICE__ + +#include +#include + +#define HT_INIT_CONTROL 0x6C + #define HTIC_BIOSR_Detect (1 << 5) + + +static void set_bios_reset(void) +{ + u32 htic; + htic = pci_io_read_config32(PCI_DEV(0, 0x18, 0), HT_INIT_CONTROL); + htic &= ~HTIC_BIOSR_Detect; + pci_io_write_config32(PCI_DEV(0, 0x18, 0), HT_INIT_CONTROL, htic); +} + +void do_hard_reset(void) +{ + set_bios_reset(); + /* Try rebooting through port 0xcf9 */ + /* + * Actually it is not a real hard_reset + * --- it only reset coherent link table, + * but not reset link freq and width + */ + outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9); + outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9); +} diff --git a/src/soc/amd/stoneyridge/sata.c b/src/soc/amd/stoneyridge/sata.c new file mode 100644 index 0000000000..32090d2963 --- /dev/null +++ b/src/soc/amd/stoneyridge/sata.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +static void sata_init(struct device *dev) +{ + /************************************** + * Configure the SATA port multiplier * + **************************************/ + #define BYTE_TO_DWORD_OFFSET(x) (x/4) + #define AHCI_BASE_ADDRESS_REG 0x24 + #define MISC_CONTROL_REG 0x40 + #define UNLOCK_BIT (1<<0) + #define SATA_CAPABILITIES_REG 0xFC + #define CFG_CAP_SPM (1<<12) + + volatile u32 *ahci_ptr = + (u32*)(pci_read_config32(dev, AHCI_BASE_ADDRESS_REG) & 0xFFFFFF00); + u32 temp; + + /* unlock the write-protect */ + temp = pci_read_config32(dev, MISC_CONTROL_REG); + temp |= UNLOCK_BIT; + pci_write_config32(dev, MISC_CONTROL_REG, temp); + + /* set the SATA AHCI mode to allow port expanders */ + *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG)) |= CFG_CAP_SPM; + + /* lock the write-protect */ + temp = pci_read_config32(dev, MISC_CONTROL_REG); + temp &= ~UNLOCK_BIT; + pci_write_config32(dev, MISC_CONTROL_REG, temp); +}; + +static struct pci_operations lops_pci = { + /* .set_subsystem = pci_dev_set_subsystem, */ +}; + +static struct device_operations sata_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sata_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const unsigned short pci_device_ids[] = { + PCI_DEVICE_ID_AMD_SB900_SATA, + PCI_DEVICE_ID_AMD_SB900_SATA_AHCI, + PCI_DEVICE_ID_AMD_CZ_SATA, + PCI_DEVICE_ID_AMD_CZ_SATA_AHCI, + 0 +}; + +static const struct pci_driver sata0_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_AMD, + .devices = pci_device_ids, +}; diff --git a/src/soc/amd/stoneyridge/sd.c b/src/soc/amd/stoneyridge/sd.c new file mode 100644 index 0000000000..484dee4227 --- /dev/null +++ b/src/soc/amd/stoneyridge/sd.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +static void sd_init(struct device *dev) +{ + u32 stepping; + + stepping = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x18, 3)), 0xFC); + + struct soc_amd_stoneyridge_config *sd_chip = + (struct soc_amd_stoneyridge_config *)(dev->chip_info); + + if (sd_chip->sd_mode == 3) { /* SD 3.0 mode */ + pci_write_config32(dev, 0xA4, 0x31FEC8B2); + pci_write_config32(dev, 0xA8, 0x00002503); + pci_write_config32(dev, 0xB0, 0x02180C19); + pci_write_config32(dev, 0xD0, 0x0000078B); + } + else { /* SD 2.0 mode */ + if ((stepping & 0x0000000F) == 0) { /* Stepping A0 */ + pci_write_config32(dev, 0xA4, 0x31DE32B2); + pci_write_config32(dev, 0xB0, 0x01180C19); + pci_write_config32(dev, 0xD0, 0x0000058B); + } + else { /* Stepping >= A1 */ + pci_write_config32(dev, 0xA4, 0x31FE3FB2); + pci_write_config32(dev, 0xB0, 0x01180C19); + pci_write_config32(dev, 0xD0, 0x0000078B); + } + } +} + +static struct device_operations sd_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sd_init, + .scan_bus = 0, +}; + +static const struct pci_driver sd_driver __pci_driver = { + .ops = &sd_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_YANGTZE_SD, +}; diff --git a/src/soc/amd/stoneyridge/sm.c b/src/soc/amd/stoneyridge/sm.c new file mode 100644 index 0000000000..421151af97 --- /dev/null +++ b/src/soc/amd/stoneyridge/sm.c @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NMI_OFF 0 + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +/* +* HUDSON enables all USB controllers by default in SMBUS Control. +* HUDSON enables SATA by default in SMBUS Control. +*/ + +static void sm_init(device_t dev) +{ + setup_ioapic(VIO_APIC_VADDR, CONFIG_MAX_CPUS); +} + +static int lsmbus_recv_byte(device_t dev) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_recv_byte(res->base, device); +} + +static int lsmbus_send_byte(device_t dev, u8 val) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_send_byte(res->base, device, val); +} + +static int lsmbus_read_byte(device_t dev, u8 address) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_read_byte(res->base, device, address); +} + +static int lsmbus_write_byte(device_t dev, u8 address, u8 val) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_write_byte(res->base, device, address, val); +} +static struct smbus_bus_operations lops_smbus_bus = { + .recv_byte = lsmbus_recv_byte, + .send_byte = lsmbus_send_byte, + .read_byte = lsmbus_read_byte, + .write_byte = lsmbus_write_byte, +}; + +static void hudson_sm_read_resources(device_t dev) +{ +} + +static void hudson_sm_set_resources(struct device *dev) +{ +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; +static struct device_operations smbus_ops = { + .read_resources = hudson_sm_read_resources, + .set_resources = hudson_sm_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sm_init, + .scan_bus = scan_smbus, + .ops_pci = &lops_pci, + .ops_smbus_bus = &lops_smbus_bus, +}; +static const struct pci_driver smbus_driver __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_SB900_SM, +}; diff --git a/src/soc/amd/stoneyridge/smbus.c b/src/soc/amd/stoneyridge/smbus.c new file mode 100644 index 0000000000..e890c470a9 --- /dev/null +++ b/src/soc/amd/stoneyridge/smbus.c @@ -0,0 +1,246 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _STONEYRIDGE_SMBUS_C_ +#define _STONEYRIDGE_SMBUS_C_ + +#include +#include +#include + +static int smbus_wait_until_ready(u32 smbus_io_base) +{ + u32 loops; + loops = SMBUS_TIMEOUT; + do { + u8 val; + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; + if (val == 0) { /* ready now */ + return 0; + } + outb(val, smbus_io_base + SMBHSTSTAT); + } while (--loops); + return -2; /* time out */ +} + +static int smbus_wait_until_done(u32 smbus_io_base) +{ + u32 loops; + loops = SMBUS_TIMEOUT; + do { + u8 val; + + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; /* mask off reserved bits */ + if (val & 0x1c) { + return -5; /* error */ + } + if (val == 0x02) { + outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */ + return 0; + } + } while (--loops); + return -3; /* timeout */ +} + +int do_smbus_recv_byte(u32 smbus_io_base, u32 device) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTCMD); + + return byte; +} + +int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command... */ + outb(val, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + return 0; +} + +int do_smbus_read_byte(u32 smbus_io_base, u32 device, + u32 address) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTDAT0); + + return byte; +} + +int do_smbus_write_byte(u32 smbus_io_base, u32 device, + u32 address, u8 val) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + + /* output value */ + outb(val, smbus_io_base + SMBHSTDAT0); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + return 0; +} + +void alink_ab_indx(u32 reg_space, u32 reg_addr, + u32 mask, u32 val) +{ + u32 tmp; + + outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); + tmp = inl(AB_DATA); + /* rpr 4.2 + * For certain revisions of the chip, the ABCFG registers, + * with an address of 0x100NN (where 'N' is any hexadecimal + * number), require an extra programming step.*/ + outl(0, AB_INDX); + + tmp &= ~mask; + tmp |= val; + + /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */ + outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl(tmp, AB_DATA); + outl(0, AB_INDX); +} + +void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, + u32 mask, u32 val) +{ + u32 tmp; + + outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); + tmp = inl(AB_DATA); + /* rpr 4.2 + * For certain revisions of the chip, the ABCFG registers, + * with an address of 0x100NN (where 'N' is any hexadecimal + * number), require an extra programming step.*/ + outl(0, AB_INDX); + + tmp &= ~mask; + tmp |= val; + + //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr); + outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl(tmp, AB_DATA); + outl(0, AB_INDX); +} + +/* space = 0: AX_INDXC, AX_DATAC + * space = 1: AX_INDXP, AX_DATAP + */ +void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, + u32 mask, u32 val) +{ + u32 tmp; + + /* read axindc to tmp */ + outl(space << 29 | space << 3 | 0x30, AB_INDX); + outl(axindc, AB_DATA); + outl(0, AB_INDX); + outl(space << 29 | space << 3 | 0x34, AB_INDX); + tmp = inl(AB_DATA); + outl(0, AB_INDX); + + tmp &= ~mask; + tmp |= val; + + /* write tmp */ + outl(space << 29 | space << 3 | 0x30, AB_INDX); + outl(axindc, AB_DATA); + outl(0, AB_INDX); + outl(space << 29 | space << 3 | 0x34, AB_INDX); + outl(tmp, AB_DATA); + outl(0, AB_INDX); +} +#endif diff --git a/src/soc/amd/stoneyridge/smbus_spd.c b/src/soc/amd/stoneyridge/smbus_spd.c new file mode 100644 index 0000000000..8d67b1e678 --- /dev/null +++ b/src/soc/amd/stoneyridge/smbus_spd.c @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +/* warning: Porting.h includes an open #pragma pack(1) */ +#include +#include +#include + +#include + +/*----------------------------------------------------------------------------- + * + * readSmbusByteData - read a single SPD byte from any offset + */ + +static int readSmbusByteData (int iobase, int address, char *buffer, int offset) +{ + unsigned int status; + UINT64 limit; + + address |= 1; // set read bit + + __outbyte (iobase + 0, 0xFF); // clear error status + __outbyte (iobase + 1, 0x1F); // clear error status + __outbyte (iobase + 3, offset); // offset in eeprom + __outbyte (iobase + 4, address); // slave address and read bit + __outbyte (iobase + 2, 0x48); // read byte command + + // time limit to avoid hanging for unexpected error status (should never happen) + limit = __rdtsc () + 2000000000 / 10; + for (;;) + { + status = __inbyte (iobase); + if (__rdtsc () > limit) break; + if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting + if ((status & 1) == 1) continue; // HostBusy set, keep waiting + break; + } + + buffer [0] = __inbyte (iobase + 5); + if (status == 2) status = 0; // check for done with no errors + return status; +} + +/*----------------------------------------------------------------------------- + * + * readSmbusByte - read a single SPD byte from the default offset + * this function is faster function readSmbusByteData + */ + +static int readSmbusByte (int iobase, int address, char *buffer) +{ + unsigned int status; + UINT64 limit; + + __outbyte (iobase + 0, 0xFF); // clear error status + __outbyte (iobase + 2, 0x44); // read command + + // time limit to avoid hanging for unexpected error status + limit = __rdtsc () + 2000000000 / 10; + for (;;) + { + status = __inbyte (iobase); + if (__rdtsc () > limit) break; + if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting + if ((status & 1) == 1) continue; // HostBusy set, keep waiting + break; + } + + buffer [0] = __inbyte (iobase + 5); + if (status == 2) status = 0; // check for done with no errors + return status; +} + +/*--------------------------------------------------------------------------- + * + * readspd - Read one or more SPD bytes from a DIMM. + * Start with offset zero and read sequentially. + * Optimization relies on autoincrement to avoid + * sending offset for every byte. + * Reads 128 bytes in 7-8 ms at 400 KHz. + */ + +static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count) +{ + int index, error; + + printk(BIOS_SPEW, "-------------READING SPD-----------\n"); + printk(BIOS_SPEW, "iobase: 0x%08X, SmbusSlave: 0x%08X, count: %d\n", + iobase, SmbusSlaveAddress, count); + + /* read the first byte using offset zero */ + error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0); + + if (error) { + printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n"); + return error; + } + + /* read the remaining bytes using auto-increment for speed */ + for (index = 1; index < count; index++) + { + error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]); + if (error) { + printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n"); + return error; + } + } + printk(BIOS_SPEW, "\n"); + printk(BIOS_SPEW, "-------------FINISHED READING SPD-----------\n"); + + return 0; +} + +static void writePmReg (int reg, int data) +{ + __outbyte (0xCD6, reg); + __outbyte (0xCD7, data); +} + +static void setupFch (int ioBase) +{ + writePmReg (0x2D, ioBase >> 8); + writePmReg (0x2C, ioBase | 1); + __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz +} + +int hudson_readSpd(int spdAddress, char *buf, size_t len) +{ + int ioBase = 0xB00; + setupFch (ioBase); + return readspd (ioBase, spdAddress, buf, len); +} diff --git a/src/soc/amd/stoneyridge/smi.c b/src/soc/amd/stoneyridge/smi.c new file mode 100644 index 0000000000..c92697cf6d --- /dev/null +++ b/src/soc/amd/stoneyridge/smi.c @@ -0,0 +1,26 @@ +/* + * Utilities for SMM setup + * + * Copyright (C) 2014 Alexandru Gagniuc + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + + + +#include +#include +#include + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1) +{ + printk(BIOS_DEBUG, "smm_setup_structures STUB!!!\n"); +} + +/** Set the EOS bit and enable SMI generation from southbridge */ +void hudson_enable_smi_generation(void) +{ + uint32_t reg = smi_read32(SMI_REG_SMITRIG0); + reg &= ~SMITRG0_SMIENB; /* Enable SMI generation */ + reg |= SMITRG0_EOS; /* Set EOS bit */ + smi_write32(SMI_REG_SMITRIG0, reg); +} diff --git a/src/soc/amd/stoneyridge/smi_util.c b/src/soc/amd/stoneyridge/smi_util.c new file mode 100644 index 0000000000..fecaf90723 --- /dev/null +++ b/src/soc/amd/stoneyridge/smi_util.c @@ -0,0 +1,78 @@ +/* + * SMM utilities used in both SMM and normal mode + * + * Copyright (C) 2014 Alexandru Gagniuc + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + +#include +#include + +#define STONEYRIDGE_SMI_ACPI_COMMAND 75 + +static void configure_smi(uint8_t smi_num, uint8_t mode) +{ + uint8_t reg32_offset, bit_offset; + uint32_t reg32; + + /* SMI sources range from [0:149] */ + if (smi_num > 149) { + printk(BIOS_WARNING, "BUG: Invalid SMI: %u\n", smi_num); + return; + } + + /* 16 sources per register, 2 bits per source; registers are 4 bytes */ + reg32_offset = (smi_num / 16) * 4; + bit_offset = (smi_num % 16) * 2; + + reg32 = smi_read32(SMI_REG_CONTROL0 + reg32_offset); + reg32 &= ~(0x3 << (bit_offset)); + reg32 |= (mode & 0x3) << bit_offset; + smi_write32(SMI_REG_CONTROL0 + reg32_offset, reg32); +} + +/** + * Configure generation of interrupts for given GEVENT pin + * + * @param gevent The GEVENT pin number. Valid values are 0 thru 23 + * @param mode The type of event this pin should generate. Note that only + * SMI_MODE_SMI generates an SMI. SMI_MODE_DISABLE disables events. + * @param level SMI_LVL_LOW or SMI_LVL_HIGH + */ +void hudson_configure_gevent_smi(uint8_t gevent, uint8_t mode, uint8_t level) +{ + uint32_t reg32; + /* GEVENT pins range from [0:23] */ + if (gevent > 23) { + printk(BIOS_WARNING, "BUG: Invalid GEVENT: %u\n", gevent); + return; + } + + /* SMI0 source is GEVENT0 and so on */ + configure_smi(gevent, mode); + + /* And set set the trigger level */ + reg32 = smi_read32(SMI_REG_SMITRIG0); + reg32 &= ~(1 << gevent); + reg32 |= (level & 0x1) << gevent; + smi_write32(SMI_REG_SMITRIG0, reg32); +} + +/** Disable events from given GEVENT pin */ +void hudson_disable_gevent_smi(uint8_t gevent) +{ + /* GEVENT pins range from [0:23] */ + if (gevent > 23) { + printk(BIOS_WARNING, "BUG: Invalid GEVENT: %u\n", gevent); + return; + } + + /* SMI0 source is GEVENT0 and so on */ + configure_smi(gevent, SMI_MODE_DISABLE); +} + +/** Enable SMIs on writes to ACPI SMI command port */ +void hudson_enable_acpi_cmd_smi(void) +{ + configure_smi(STONEYRIDGE_SMI_ACPI_COMMAND, SMI_MODE_SMI); +} diff --git a/src/soc/amd/stoneyridge/smihandler.c b/src/soc/amd/stoneyridge/smihandler.c new file mode 100644 index 0000000000..cf95418b7c --- /dev/null +++ b/src/soc/amd/stoneyridge/smihandler.c @@ -0,0 +1,136 @@ +/* + * SMI handler for Hudson southbridges + * + * Copyright (C) 2014 Alexandru Gagniuc + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + + +#include +#include +#include +#include +#include + + + +#define SMI_0x88_ACPI_COMMAND (1 << 11) + +enum smi_source { + SMI_SOURCE_SCI = (1 << 0), + SMI_SOURCE_GPE = (1 << 1), + SMI_SOURCE_0x84 = (1 << 2), + SMI_SOURCE_0x88 = (1 << 3), + SMI_SOURCE_IRQ_TRAP = (1 << 4), + SMI_SOURCE_0x90 = (1 << 5) +}; + +static void hudson_apmc_smi_handler(void) +{ + u32 reg32; + const uint8_t cmd = inb(ACPI_SMI_CTL_PORT); + + switch (cmd) { + case ACPI_SMI_CMD_ENABLE: + reg32 = inl(ACPI_PM1_CNT_BLK); + reg32 |= (1 << 0); /* SCI_EN */ + outl(reg32, ACPI_PM1_CNT_BLK); + break; + case ACPI_SMI_CMD_DISABLE: + reg32 = inl(ACPI_PM1_CNT_BLK); + reg32 &= ~(1 << 0); /* clear SCI_EN */ + outl(ACPI_PM1_CNT_BLK, reg32); + break; + } + + mainboard_smi_apmc(cmd); +} + +int southbridge_io_trap_handler(int smif) +{ + return 0; +} + +static void process_smi_sci(void) +{ + const uint32_t status = smi_read32(0x10); + + /* Clear events to prevent re-entering SMI if event isn't handled */ + smi_write32(0x10, status); +} + +static void process_gpe_smi(void) +{ + const uint32_t status = smi_read32(0x80); + const uint32_t gevent_mask = (1 << 24) - 1; + + /* Only Bits [23:0] indicate GEVENT SMIs. */ + if (status & gevent_mask) { + /* A GEVENT SMI occurred */ + mainboard_smi_gpi(status & gevent_mask); + } + + /* Clear events to prevent re-entering SMI if event isn't handled */ + smi_write32(0x80, status); +} + +static void process_smi_0x84(void) +{ + const uint32_t status = smi_read32(0x84); + + /* Clear events to prevent re-entering SMI if event isn't handled */ + smi_write32(0x84, status); +} + +static void process_smi_0x88(void) +{ + const uint32_t status = smi_read32(0x88); + + if (status & SMI_0x88_ACPI_COMMAND) { + /* Command received via ACPI SMI command port */ + hudson_apmc_smi_handler(); + } + /* Clear events to prevent re-entering SMI if event isn't handled */ + smi_write32(0x88, status); +} + +static void process_smi_0x8c(void) +{ + const uint32_t status = smi_read32(0x8c); + + /* Clear events to prevent re-entering SMI if event isn't handled */ + smi_write32(0x8c, status); +} + +static void process_smi_0x90(void) +{ + const uint32_t status = smi_read32(0x90); + + /* Clear events to prevent re-entering SMI if event isn't handled */ + smi_write32(0x90, status); +} + +void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save) +{ + const uint16_t smi_src = smi_read16(0x94); + + if (smi_src & SMI_SOURCE_SCI) + process_smi_sci(); + if (smi_src & SMI_SOURCE_GPE) + process_gpe_smi(); + if (smi_src & SMI_SOURCE_0x84) + process_smi_0x84(); + if (smi_src & SMI_SOURCE_0x88) + process_smi_0x88(); + if (smi_src & SMI_SOURCE_IRQ_TRAP) + process_smi_0x8c(); + if (smi_src & SMI_SOURCE_0x90) + process_smi_0x90(); +} + +void southbridge_smi_set_eos(void) +{ + uint32_t reg = smi_read32(SMI_REG_SMITRIG0); + reg |= SMITRG0_EOS; + smi_write32(SMI_REG_SMITRIG0, reg); +} diff --git a/src/soc/amd/stoneyridge/uart.c b/src/soc/amd/stoneyridge/uart.c new file mode 100644 index 0000000000..5d88204f33 --- /dev/null +++ b/src/soc/amd/stoneyridge/uart.c @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +uintptr_t uart_platform_base(int idx) +{ + return (uintptr_t)(0xFEDC6000 + 0x2000 * (idx & 1)); +} + +unsigned int uart_platform_refclk(void) +{ + return 48000000; +} diff --git a/src/soc/amd/stoneyridge/usb.c b/src/soc/amd/stoneyridge/usb.c new file mode 100644 index 0000000000..6f273952cf --- /dev/null +++ b/src/soc/amd/stoneyridge/usb.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static void usb_init(struct device *dev) +{ +} + +static struct device_operations usb_ops = { + .read_resources = pci_ehci_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = usb_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const unsigned short pci_device_ids[] = { + PCI_DEVICE_ID_AMD_SB900_USB_18_0, + PCI_DEVICE_ID_AMD_SB900_USB_18_2, + PCI_DEVICE_ID_AMD_SB900_USB_20_5, + PCI_DEVICE_ID_AMD_CZ_USB_0, + PCI_DEVICE_ID_AMD_CZ_USB_1, + PCI_DEVICE_ID_AMD_CZ_USB3_0, + 0 +}; + +static const struct pci_driver usb_0_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_AMD, + .devices = pci_device_ids, +}; -- cgit v1.2.3