From 011bf1371562fd0a4cd232b64c03db828a48bace Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Tue, 23 Mar 2021 13:20:42 -0600 Subject: soc/amd/common: Add func to clear eSPI IO & memory decode ranges Previously, the eSPI code would only add to existing decode ranges, and there wasn't any way to clear ranges. This clears all the ranges so the eSPI configuration can start fresh. BUG=b:183207262, b:183974365 TEST=Verify on Guybrush Signed-off-by: Martin Roth Change-Id: Ic4e67c40d34915505bdd5b431a064d2c7b6bbc70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51748 Tested-by: build bot (Jenkins) Reviewed-by: Raul Rangel Reviewed-by: Furquan Shaikh --- src/soc/amd/common/block/include/amdblocks/espi.h | 7 +++++++ src/soc/amd/common/block/lpc/espi_util.c | 21 +++++++++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'src/soc/amd') diff --git a/src/soc/amd/common/block/include/amdblocks/espi.h b/src/soc/amd/common/block/include/amdblocks/espi.h index c593e02d49..7ca5b05e32 100644 --- a/src/soc/amd/common/block/include/amdblocks/espi.h +++ b/src/soc/amd/common/block/include/amdblocks/espi.h @@ -106,6 +106,13 @@ int espi_open_mmio_window(uint32_t base, size_t size); */ void espi_configure_decodes(void); +/* + * Clear all configured eSPI memory and I/O decode ranges. This is useful for changing + * the decodes, or if something else has previously setup decode windows that conflict + * with the windows that coreboot needs. + */ +void espi_clear_decodes(void); + /* * In cases where eSPI BAR is statically provided by SoC, use that BAR instead of reading * SPIBASE. This is required for cases where verstage runs on PSP. diff --git a/src/soc/amd/common/block/lpc/espi_util.c b/src/soc/amd/common/block/lpc/espi_util.c index 0878fb7663..152cdd9001 100644 --- a/src/soc/amd/common/block/lpc/espi_util.c +++ b/src/soc/amd/common/block/lpc/espi_util.c @@ -98,6 +98,27 @@ static int espi_get_unused_io_window(void) return -1; } +void espi_clear_decodes(void) +{ + unsigned int idx; + + /* First turn off all enable bits, then zero base, range, and size registers */ + /* + * There is currently a bug where the SMU will lock up at times if the port80h enable + * bit is cleared. See b/183974365 + */ + espi_write16(ESPI_DECODE, (espi_read16(ESPI_DECODE) & ESPI_DECODE_IO_0x80_EN)); + + for (idx = 0; idx < ESPI_GENERIC_IO_WIN_COUNT; idx++) { + espi_write16(ESPI_IO_RANGE_BASE(idx), 0); + espi_write8(ESPI_IO_RANGE_SIZE(idx), 0); + } + for (idx = 0; idx < ESPI_GENERIC_MMIO_WIN_COUNT; idx++) { + espi_write32(ESPI_MMIO_RANGE_BASE(idx), 0); + espi_write16(ESPI_MMIO_RANGE_SIZE(idx), 0); + } +} + /* * Returns decode enable bits for standard IO port addresses. If port address is not supported * by standard decode or if the size of window is not 1, then it returns -1. -- cgit v1.2.3