From 5401aa207cf67a222f8685faedcd97e856fe857e Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Tue, 11 Sep 2018 11:36:38 -0700 Subject: soc/amd/stoneyridge/gpio.c: Create I2C slave reset code AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz Tested-by: build bot (Jenkins) --- src/soc/amd/stoneyridge/bootblock/bootblock.c | 9 +++ src/soc/amd/stoneyridge/chip.h | 9 +++ src/soc/amd/stoneyridge/gpio.c | 102 ++++++++++++++++++++++++++ src/soc/amd/stoneyridge/include/soc/gpio.h | 29 ++++++++ 4 files changed, 149 insertions(+) (limited to 'src/soc/amd/stoneyridge') diff --git a/src/soc/amd/stoneyridge/bootblock/bootblock.c b/src/soc/amd/stoneyridge/bootblock/bootblock.c index c2440b0eb1..479e0fc9f2 100644 --- a/src/soc/amd/stoneyridge/bootblock/bootblock.c +++ b/src/soc/amd/stoneyridge/bootblock/bootblock.c @@ -93,6 +93,15 @@ asmlinkage void bootblock_c_entry(uint64_t base_timestamp) void bootblock_soc_early_init(void) { + /* + * This call (sb_reset_i2c_slaves) was originally early at + * bootblock_c_entry, but had to be moved here. There was an + * unexplained delay in the middle of the i2c transaction when + * we had it in bootblock_c_entry. Moving it to this point + * (or adding delays) fixes the issue. It seems like the processor + * just pauses but we don't know why. + */ + sb_reset_i2c_slaves(); bootblock_fch_early_init(); post_code(0x90); } diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h index 4cf2b33596..8ed8e4d903 100644 --- a/src/soc/amd/stoneyridge/chip.h +++ b/src/soc/amd/stoneyridge/chip.h @@ -50,6 +50,15 @@ struct soc_amd_stoneyridge_config { /* Used if UMAMODE_SPECIFIED_SIZE is set. */ size_t uma_size; + /* + * If sb_reset_i2c_slaves() is called, this devicetree register + * defines which I2C SCL will be toggled 9 times at 100 KHz. + * For example, should we need I2C0 and I2C3 have their slave + * devices reseted by toggling SCL, use: + * + * register i2c_scl_reset = (GPIO_I2C0_SCL | GPIO_I2C3_SCL) + */ + u8 i2c_scl_reset; struct dw_i2c_bus_config i2c[STONEY_I2C_DEV_MAX]; u8 stapm_percent; u32 stapm_time; diff --git a/src/soc/amd/stoneyridge/gpio.c b/src/soc/amd/stoneyridge/gpio.c index b469f820b2..cc54f2c82d 100644 --- a/src/soc/amd/stoneyridge/gpio.c +++ b/src/soc/amd/stoneyridge/gpio.c @@ -17,8 +17,10 @@ #include #include +#include #include #include +#include #include #include @@ -237,6 +239,7 @@ void sb_program_gpios(const struct soc_amd_gpio *gpio_list_ptr, size_t size) mux_ptr = (uint8_t *)(uintptr_t)(gpio + AMD_GPIO_MUX); write8(mux_ptr, mux & AMD_GPIO_MUX_MASK); + read8(mux_ptr); /* Flush posted write */ /* special case if pin 2 is assigned to wake */ if ((gpio == 2) && !(mux & AMD_GPIO_MUX_MASK)) route_sci(GPIO_2_EVENT); @@ -296,6 +299,105 @@ void sb_program_gpios(const struct soc_amd_gpio *gpio_list_ptr, size_t size) edge_level, mask); } +/* + * I2C pins are open drain with external pull up, so in order to bit bang them + * all, SCL pins must become GPIO inputs with no pull, then they need to be + * toggled between input-no-pull and output-low. This table is for the initial + * conversion of all SCL pins to input with no pull. + */ +static const struct soc_amd_gpio i2c_2_gpi[] = { + PAD_GPI(I2C0_SCL_PIN, PULL_NONE), + PAD_GPI(I2C1_SCL_PIN, PULL_NONE), + PAD_GPI(I2C2_SCL_PIN, PULL_NONE), + PAD_GPI(I2C3_SCL_PIN, PULL_NONE), +}; +#define saved_pins_count ARRAY_SIZE(i2c_2_gpi) + +/* + * To program I2C pins without destroying their programming, the registers + * that will be changed need to be saved first. + */ +static void save_i2c_pin_registers(uint8_t gpio, + struct soc_amd_i2c_save *save_table) +{ + uint32_t *gpio_ptr; + uint8_t *mux_ptr; + + mux_ptr = (uint8_t *)(uintptr_t)(gpio + AMD_GPIO_MUX); + gpio_ptr = (uint32_t *)gpio_get_address(gpio); + save_table->mux_value = read8(mux_ptr); + save_table->control_value = read32(gpio_ptr); +} + +static void restore_i2c_pin_registers(uint8_t gpio, + struct soc_amd_i2c_save *save_table) +{ + uint32_t *gpio_ptr; + uint8_t *mux_ptr; + + mux_ptr = (uint8_t *)(uintptr_t)(gpio + AMD_GPIO_MUX); + gpio_ptr = (uint32_t *)gpio_get_address(gpio); + write8(mux_ptr, save_table->mux_value); + read8(mux_ptr); + write32(gpio_ptr, save_table->control_value); + read32(gpio_ptr); +} + +/* Slaves to be reset are controlled by devicetree register i2c_scl_reset */ +void sb_reset_i2c_slaves(void) +{ + const struct soc_amd_stoneyridge_config *cfg; + const struct device *dev = dev_find_slot(0, GNB_DEVFN); + struct soc_amd_i2c_save save_table[saved_pins_count]; + uint8_t i, j, control; + + if (!dev || !dev->chip_info) + return; + cfg = dev->chip_info; + control = cfg->i2c_scl_reset & GPIO_I2C_MASK; + if (control == 0) + return; + + /* Save and reprogram I2C SCL pins */ + for (i = 0; i < saved_pins_count; i++) + save_i2c_pin_registers(i2c_2_gpi[i].gpio, &save_table[i]); + sb_program_gpios(i2c_2_gpi, saved_pins_count); + + /* + * Toggle SCL back and forth 9 times under 100KHz. A single read is + * needed after the writes to force the posted write to complete. + */ + for (j = 0; j < 9; j++) { + if (control & GPIO_I2C0_SCL) + write32((uint32_t *)GPIO_I2C0_ADDRESS, GPIO_SCL_LOW); + if (control & GPIO_I2C1_SCL) + write32((uint32_t *)GPIO_I2C1_ADDRESS, GPIO_SCL_LOW); + if (control & GPIO_I2C2_SCL) + write32((uint32_t *)GPIO_I2C2_ADDRESS, GPIO_SCL_LOW); + if (control & GPIO_I2C3_SCL) + write32((uint32_t *)GPIO_I2C3_ADDRESS, GPIO_SCL_LOW); + + read32((uint32_t *)GPIO_I2C3_ADDRESS); /* Flush posted write */ + udelay(4); /* 4usec gets 85KHz for 1 pin, 70KHz for 4 pins */ + + if (control & GPIO_I2C0_SCL) + write32((uint32_t *)GPIO_I2C0_ADDRESS, GPIO_SCL_HIGH); + if (control & GPIO_I2C1_SCL) + write32((uint32_t *)GPIO_I2C1_ADDRESS, GPIO_SCL_HIGH); + if (control & GPIO_I2C2_SCL) + write32((uint32_t *)GPIO_I2C2_ADDRESS, GPIO_SCL_HIGH); + if (control & GPIO_I2C3_SCL) + write32((uint32_t *)GPIO_I2C3_ADDRESS, GPIO_SCL_HIGH); + + read32((uint32_t *)GPIO_I2C3_ADDRESS); /* Flush posted write */ + udelay(4); + } + + /* Restore I2C pins. */ + for (i = 0; i < saved_pins_count; i++) + restore_i2c_pin_registers(i2c_2_gpi[i].gpio, &save_table[i]); +} + int gpio_interrupt_status(gpio_t gpio) { uintptr_t gpio_address = gpio_get_address(gpio); diff --git a/src/soc/amd/stoneyridge/include/soc/gpio.h b/src/soc/amd/stoneyridge/include/soc/gpio.h index 6e722933b8..b758309c75 100644 --- a/src/soc/amd/stoneyridge/include/soc/gpio.h +++ b/src/soc/amd/stoneyridge/include/soc/gpio.h @@ -36,6 +36,17 @@ struct soc_amd_event { uint8_t event; }; +struct soc_amd_i2c_save { + uint32_t control_value; + uint8_t mux_value; +}; + +#define GPIO_I2C0_SCL BIT(0) +#define GPIO_I2C1_SCL BIT(1) +#define GPIO_I2C2_SCL BIT(2) +#define GPIO_I2C3_SCL BIT(3) +#define GPIO_I2C_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) + #define GPIO_TOTAL_PINS 149 #define GPIO_PIN_IN (1 << 0) /* for byte access */ #define GPIO_PIN_OUT (1 << 6) /* for byte access */ @@ -171,6 +182,18 @@ struct soc_amd_event { #define GPIO_147 147 #define GPIO_148 148 +#define I2C0_SCL_PIN GPIO_145 +#define I2C1_SCL_PIN GPIO_147 +#define I2C2_SCL_PIN GPIO_113 +#define I2C3_SCL_PIN GPIO_19 + +#define GPIO_I2C0_ADDRESS GPIO_BANK2_CONTROL(I2C0_SCL_PIN) +#define GPIO_I2C1_ADDRESS GPIO_BANK2_CONTROL(I2C1_SCL_PIN) +#define GPIO_I2C2_ADDRESS GPIO_BANK1_CONTROL(I2C2_SCL_PIN) +#define GPIO_I2C3_ADDRESS GPIO_BANK0_CONTROL(I2C3_SCL_PIN) +#define GPIO_SCL_HIGH 0 +#define GPIO_SCL_LOW GPIO_OUTPUT_ENABLE + /* IOMUX function names and values generated from BKDG. */ #define GPIO_0_IOMUX_PWR_BTN_L 0 #define GPIO_0_IOMUX_GPIOxx 1 @@ -346,6 +369,11 @@ struct soc_amd_event { #define GPIO_148_IOMUX_I2C1_SDA 0 #define GPIO_148_IOMUX_GPIOxx 1 +#define I2C0_SCL_PIN_IOMUX_GPIOxx GPIO_145_IOMUX_GPIOxx +#define I2C1_SCL_PIN_IOMUX_GPIOxx GPIO_147_IOMUX_GPIOxx +#define I2C2_SCL_PIN_IOMUX_GPIOxx GPIO_113_IOMUX_GPIOxx +#define I2C3_SCL_PIN_IOMUX_GPIOxx GPIO_19_IOMUX_GPIOxx + enum { GEVENT_0, GEVENT_1, @@ -571,6 +599,7 @@ uintptr_t gpio_get_address(gpio_t gpio_num); * @return none */ void sb_program_gpios(const struct soc_amd_gpio *gpio_list_ptr, size_t size); +void sb_reset_i2c_slaves(void); /* Return the interrupt status and clear if set. */ int gpio_interrupt_status(gpio_t gpio); -- cgit v1.2.3