From eceaa97b27b04a61dd5fb2e68e0f5ac1367a3c0f Mon Sep 17 00:00:00 2001 From: Marshall Dawson Date: Sun, 5 May 2019 18:35:12 -0600 Subject: soc/amd/stoneyridge: Rework SPI base address get/set A subsequent patch will move the soc//stoneyridge LPC functionality to a common directory. Prepare by reworking the SPI BAR configuration function in southbridge.h. The SPI BAR is not a typical PCI BAR, and is at D14F3xA0. Change-Id: I73ddb4afaf9e67ca0522ecb6085b23c92fedc461 Signed-off-by: Marshall Dawson Reviewed-on: https://review.coreboot.org/c/coreboot/+/32652 Reviewed-by: Martin Roth Reviewed-by: Richard Spiegel Tested-by: build bot (Jenkins) --- src/soc/amd/stoneyridge/southbridge.c | 56 ++++++++++++++++++++++++----------- 1 file changed, 39 insertions(+), 17 deletions(-) (limited to 'src/soc/amd/stoneyridge/southbridge.c') diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c index 84db3dd76c..b8d0595965 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/southbridge.c @@ -397,27 +397,49 @@ void sb_clk_output_48Mhz(u32 osc) misc_write32(MISC_CLK_CNTL1, ctrl); } -static uintptr_t sb_spibase(void) +static uintptr_t sb_get_spibase(void) { - u32 base, enables; + u32 base; - /* Make sure the base address is predictable */ base = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER); - enables = base & SPI_PRESERVE_BITS; - base &= ~(SPI_PRESERVE_BITS | SPI_BASE_RESERVED); - - if (!base) { - base = SPI_BASE_ADDRESS; - pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, - base | enables | SPI_ROM_ENABLE); - /* PCI_COMMAND_MEMORY is read-only and enabled. */ - } + base = ALIGN_DOWN(base, SPI_BASE_ALIGNMENT); return (uintptr_t)base; } +static void sb_set_spibase(u32 base, u32 enable) +{ + u32 reg32; + + /* only two types of CS# enables are allowed */ + enable &= SPI_ROM_ENABLE | SPI_ROM_ALT_ENABLE; + + reg32 = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER); + + reg32 &= SPI_BASE_ALIGNMENT - 1; /* preserve only reserved, enables */ + reg32 &= ~(SPI_ROM_ENABLE | SPI_ROM_ALT_ENABLE); + reg32 |= enable; + reg32 |= ALIGN_DOWN(base, SPI_BASE_ALIGNMENT); + + pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, reg32); +} + +static uintptr_t sb_init_spi_base(void) +{ + uintptr_t base; + + /* Make sure the base address is predictable */ + base = sb_get_spibase(); + + if (base) + return base; + + sb_set_spibase(SPI_BASE_ADDRESS, SPI_ROM_ENABLE); + return SPI_BASE_ADDRESS; +} + void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm) { - uintptr_t base = sb_spibase(); + uintptr_t base = sb_init_spi_base(); write16((void *)(base + SPI100_SPEED_CONFIG), (norm << SPI_NORM_SPEED_NEW_SH) | (fast << SPI_FAST_SPEED_NEW_SH) | @@ -428,7 +450,7 @@ void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm) void sb_disable_4dw_burst(void) { - uintptr_t base = sb_spibase(); + uintptr_t base = sb_init_spi_base(); write16((void *)(base + SPI100_HOST_PREF_CONFIG), read16((void *)(base + SPI100_HOST_PREF_CONFIG)) & ~SPI_RD4DW_EN_HOST); @@ -436,7 +458,7 @@ void sb_disable_4dw_burst(void) void sb_read_mode(u32 mode) { - uintptr_t base = sb_spibase(); + uintptr_t base = sb_init_spi_base(); write32((void *)(base + SPI_CNTRL0), (read32((void *)(base + SPI_CNTRL0)) & ~SPI_READ_MODE_MASK) | mode); @@ -466,7 +488,7 @@ void sb_tpm_decode(void) * Enable FCH to decode TPM associated Memory and IO regions to SPI * * This should be used if TPM is connected to SPI bus. - * Assumes SPI address space is already configured via a call to sb_spibase(). + * Assumes SPI address space is already configured. */ void sb_tpm_decode_spi(void) { @@ -631,7 +653,7 @@ void bootblock_fch_early_init(void) sb_lpc_port80(); sb_lpc_decode(); sb_lpc_early_setup(); - sb_spibase(); + sb_init_spi_base(); sb_disable_4dw_burst(); /* Must be disabled on CZ(ST) */ enable_acpimmio_decode(); fch_smbus_init(); -- cgit v1.2.3