From 4ab1db82bb30dcf374f143467b3a3b1250a4ab95 Mon Sep 17 00:00:00 2001 From: Felix Held Date: Thu, 28 Sep 2023 19:54:55 +0200 Subject: soc/amd: rework SPL file override and SPL fusing handling The SPL_TABLE_FILE and SPL_RW_AB_TABLE_FILE Kconfig options provide a way to override the default SPL file configured in the SoC's fw.cfg file by passing the '--spl-table' parameter to amdfwtool which will then use the override instead of the SPL file from the fw.cfg file. When SPL*_TABLE_FILE is an empty string, the corresponding add_opt_prefix call in the makefile will result in no '--spl-table' parameter being passed to amdfwtool, so it'll use the default SPL file from fw.cfg. In order to not pass an SPL override by default, remove the default from the SPL_TABLE_FILE in the SoC's Kconfig. The SoC default pointed to the same SPL file as in fw.cfg file anyway. Now only when a mainboard sets this option to point to a file, that file will be used as an override. This override is used to include a special SPL file needed for the verstage on PSP case on the Chromebooks. Since SPL_TABLE_FILE is an empty string by default, neither the SPL_TABLE_FILE Kconfig option nor it being evaluated in the Makefile need to be guarded by HAVE_SPL_FILE, so remove the dependency in the Kconfig and the ifeq in the Makefile. Before this patch, the HAVE_SPL_FILE option controlled two things that shouldn't be controlled by the same Kconfig option: Only when HAVE_SPL_FILE was set to y, the SPL_TABLE_FILE override was taken into account, and it also controls if spl_fuse.c got added to the build which when added will send the SPL fusing command to the PSP. So the case of needing an SPL file override, but not updating the SPL fuses wasn't supported before. The SPL file in the amdfw part will be used by the PSP bootloader for the anti-rollback feature which makes sure that the SPL file version isn't lower than what is in the SPL fuses. For this the SPL file needs to be present in the PSP directory table. The SPL version check happens way before we're running code on the x86 cores. The SPL fusing PSP command that can be sent by coreboot will tell the PSP to update the SPL fuses so that the fused minimal SPL version will be updated to the current SPL version. Since the former HAVE_SPL_FILE option now only controls if the SPL fusing command will be sent to the PSP mailbox, rename it to PERFORM_SPL_FUSING to clarify what this will do and update the help text correctly describe what this does. TEST=With INCLUDE_CONFIG_FILE set to n, timeless builds for both Birman with Phoenix APU and Skyrim result in identical binaries. Signed-off-by: Felix Held Change-Id: I6cec1f1b285fe48e81a961414fbc9978fa1003cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/78178 Reviewed-by: Matt DeVillier Tested-by: build bot (Jenkins) --- src/soc/amd/glinda/Kconfig | 33 +++++++++++++++++---------------- src/soc/amd/glinda/Makefile.inc | 2 -- 2 files changed, 17 insertions(+), 18 deletions(-) (limited to 'src/soc/amd/glinda') diff --git a/src/soc/amd/glinda/Kconfig b/src/soc/amd/glinda/Kconfig index ae4b190525..9f5d537076 100644 --- a/src/soc/amd/glinda/Kconfig +++ b/src/soc/amd/glinda/Kconfig @@ -349,37 +349,38 @@ config PSP_WHITELIST_FILE depends on HAVE_PSP_WHITELIST_FILE default "site-local/3rdparty/amd_blobs/glinda/PSP/wtl-mrg.sbin" -config HAVE_SPL_FILE - bool "Have a mainboard specific SPL table file" +config PERFORM_SPL_FUSING + bool "Send SPL fuse command to PSP" default n help - Have a mainboard specific Security Patch Level (SPL) table file. SPL file - is required to support PSP FW anti-rollback and needs to be created by AMD. - The default SPL file applies to all boards that use the concerned SoC and - is dropped under 3rdparty/blobs. The mainboard specific SPL file override - can be applied through SPL_TABLE_FILE config. + Send the Security Patch Level (SPL) fusing command to the PSP in + order to update the minimum SPL version to be written to the SoC's + fuse bits. This will prevent using any embedded firmware components + with lower SPL version. If unsure, answer 'n' config SPL_TABLE_FILE - string "SPL table file" - depends on HAVE_SPL_FILE - default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/TypeId0x55_SplTableBl_MRG.sbin" + string "SPL table file override" + help + Provide a mainboard-specific Security Patch Level (SPL) table file + override. The SPL file is required to support PSP FW anti-rollback + and needs to be created by AMD. The default SPL file specified in the + SoC's fw.cfg is in the corresponding folder of the amd_blobs submodule + and applies to all boards that use the SoC without verstage on PSP. + In the verstage on PSP case, a different SPL file is specific as an + override via this Kconfig option. config HAVE_SPL_RW_AB_FILE bool "Have a separate mainboard-specific SPL file in RW A/B partitions" default n - depends on HAVE_SPL_FILE depends on VBOOT_SLOTS_RW_AB help Have separate mainboard-specific Security Patch Level (SPL) table - file for the RW A/B FMAP partitions. See the help text of - HAVE_SPL_FILE for a more detailed description. + file for the RW A/B FMAP partitions. config SPL_RW_AB_TABLE_FILE - string "Separate SPL table file for RW A/B partitions" - depends on HAVE_SPL_RW_AB_FILE - default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/TypeId0x55_SplTableBl_MRG.sbin" + string "Separate SPL table file override for RW A/B partitions" config PSP_SOFTFUSE_BITS string "PSP Soft Fuse bits to enable" diff --git a/src/soc/amd/glinda/Makefile.inc b/src/soc/amd/glinda/Makefile.inc index 25b2fe4568..ea2a48b883 100644 --- a/src/soc/amd/glinda/Makefile.inc +++ b/src/soc/amd/glinda/Makefile.inc @@ -86,14 +86,12 @@ PSP_WHITELIST_FILE=$(CONFIG_PSP_WHITELIST_FILE) endif # type = 0x55 -ifeq ($(CONFIG_HAVE_SPL_FILE),y) SPL_TABLE_FILE=$(CONFIG_SPL_TABLE_FILE) ifeq ($(CONFIG_HAVE_SPL_RW_AB_FILE),y) SPL_RW_AB_TABLE_FILE=$(CONFIG_SPL_RW_AB_TABLE_FILE) else SPL_RW_AB_TABLE_FILE=$(CONFIG_SPL_TABLE_FILE) endif -endif # # BIOS Directory Table items - proper ordering is managed by amdfwtool -- cgit v1.2.3