From f14c9194ff6a0036f2ebec492670dd23a55493d2 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Sat, 25 Sep 2010 14:58:28 +0000 Subject: Various CONFIG_DEBUG_RAM_SETUP related fixes (trivial). Some boards still used the old DEBUG_RAM_SETUP (without _CONFIG prefix). Also, consistently use "#if CONFIG_DEBUG_RAM_SETUP" (not #ifdef) as we do elsewhere. Signed-off-by: Uwe Hermann Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5843 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/intel/i440lx/Kconfig | 1 + src/northbridge/intel/i440lx/raminit.c | 8 ++++---- src/northbridge/via/vt8601/Kconfig | 1 + src/northbridge/via/vt8601/raminit.c | 2 +- 4 files changed, 7 insertions(+), 5 deletions(-) (limited to 'src/northbridge') diff --git a/src/northbridge/intel/i440lx/Kconfig b/src/northbridge/intel/i440lx/Kconfig index cff3aac2d2..e7119c5817 100644 --- a/src/northbridge/intel/i440lx/Kconfig +++ b/src/northbridge/intel/i440lx/Kconfig @@ -19,4 +19,5 @@ config NORTHBRIDGE_INTEL_I440LX bool + select HAVE_DEBUG_RAM_SETUP diff --git a/src/northbridge/intel/i440lx/raminit.c b/src/northbridge/intel/i440lx/raminit.c index d8cebb2808..dcb22732f2 100644 --- a/src/northbridge/intel/i440lx/raminit.c +++ b/src/northbridge/intel/i440lx/raminit.c @@ -31,7 +31,7 @@ Macros and definitions. /* Uncomment this to enable debugging output. */ /* Debugging macros. */ -#if defined(DEBUG_RAM_SETUP) +#if CONFIG_DEBUG_RAM_SETUP #define PRINT_DEBUG(x) print_debug(x) #define PRINT_DEBUG_HEX8(x) print_debug_hex8(x) #define PRINT_DEBUG_HEX16(x) print_debug_hex16(x) @@ -215,7 +215,7 @@ static void northbridge_init(void) reg32 &= 0xe8000000U; pci_write_config32(NB, APBASE, reg32); - #ifdef DEBUG_RAM_SETUP +#if CONFIG_DEBUG_RAM_SETUP /* * apbase dont get set still, no idea what i have doing wrong yet, * i am almost sure that somehow i set it by mistake once, but can't @@ -225,7 +225,7 @@ static void northbridge_init(void) PRINT_DEBUG("APBASE "); PRINT_DEBUG_HEX32(reg32); PRINT_DEBUG("\n"); - #endif +#endif } @@ -265,7 +265,7 @@ static void sdram_set_registers(void) * i am not sure if that is needed, but was usefull * for me to confirm what got written */ -#ifdef DEBUG_RAM_SETUP +#if CONFIG_DEBUG_RAM_SETUP PRINT_DEBUG(" Set register 0x"); PRINT_DEBUG_HEX8(register_values[i]); PRINT_DEBUG(" to 0x"); diff --git a/src/northbridge/via/vt8601/Kconfig b/src/northbridge/via/vt8601/Kconfig index cb64dbcb31..1b202679ab 100644 --- a/src/northbridge/via/vt8601/Kconfig +++ b/src/northbridge/via/vt8601/Kconfig @@ -1,3 +1,4 @@ config NORTHBRIDGE_VIA_VT8601 bool + select HAVE_DEBUG_RAM_SETUP diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c index 2365b8d8fb..f1ebbe5338 100644 --- a/src/northbridge/via/vt8601/raminit.c +++ b/src/northbridge/via/vt8601/raminit.c @@ -69,7 +69,7 @@ static void dimms_write(int x) } } -#ifdef CONFIG_DEBUG_RAM_SETUP +#if CONFIG_DEBUG_RAM_SETUP static void dumpnorth(device_t north) { unsigned int r, c; -- cgit v1.2.3