From dd55e86a52a98c1acae30bc699eaaa12f416de51 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Thu, 14 Jun 2007 17:00:50 +0000 Subject: his patch fixes the CAS map for -.5 and -1 CAS settings. The -.5 setting should only shift the mask one bit, not two. Signed-off-by: Marc Jones Acked-by: Ronald G. Minnich Acked-by: Jordan Crouse git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2722 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/lx/raminit.c | 47 ++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 24 deletions(-) (limited to 'src/northbridge') diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c index a8555823f6..9981f58cae 100644 --- a/src/northbridge/amd/lx/raminit.c +++ b/src/northbridge/amd/lx/raminit.c @@ -151,7 +151,7 @@ static void checkDDRMax(void) } /* I don't think you need this check. - if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0){ + if (spd_byte0 >= 0xA0 || spd_byte1 >= 0xA0){ print_debug("DIMM overclocked. Check GeodeLink Speed\n"); POST_CODE(POST_PLL_MEM_FAIL); __asm__ __volatile__("hlt\n"); @@ -231,7 +231,7 @@ static void setCAS(void) ;* Destroys: We really use everything ! ;*****************************************************************************/ uint16_t glspeed, dimm_speed; - uint8_t spd_byte, casmap0, casmap1; + uint8_t spd_byte, casmap0, casmap1, casmap_shift; msr_t msr; glspeed = GeodeLinkSpeed(); @@ -246,25 +246,24 @@ static void setCAS(void) dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F))); if (dimm_speed >= glspeed) { + casmap_shift = 1; /* -.5 is a shift of 1 */ /* IF -1 timing is supported, check -1 timing > GeodeLink */ spd_byte = spd_read_byte(DIMM0, SPD_SDRAM_CYCLE_TIME_3RD); if (spd_byte != 0) { /* Turn SPD ns time into MHZ. Check what the asm does to this math. */ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F))); - if (dimm_speed <= glspeed) { - /* set we can use -.5 timing but not -1 */ - spd_byte = 31 - __builtin_clz((uint32_t) casmap0); - /* just want bits in the lower byte since we have to cast to a 32 */ - casmap0 &= 0xFF << (--spd_byte); + if (dimm_speed >= glspeed) { + casmap_shift = 2; /* -1 is a shift of 2 */ } - } /*MIN_CYCLE_10 !=0 */ + } /* SPD_SDRAM_CYCLE_TIME_3RD (-1) !=0 */ } else { - /* Timing_05 < GLspeed, can't use -.5 or -1 timing */ - spd_byte = 31 - __builtin_clz((uint32_t) casmap0); - /* just want bits in the lower byte since we have to cast to a 32 */ - casmap0 &= 0xFF << (spd_byte); + casmap_shift = 0; } - } /*MIN_CYCLE_05 !=0 */ + } /* SPD_SDRAM_CYCLE_TIME_2ND (-.5) !=0 */ + /* set the casmap based on the shift to limit possible CAS settings */ + spd_byte = 31 - __builtin_clz((uint32_t) casmap0); + /* just want bits in the lower byte since we have to cast to a 32 */ + casmap0 &= 0xFF << (spd_byte - casmap_shift); } else { /* No DIMM */ casmap0 = 0; } @@ -278,25 +277,25 @@ static void setCAS(void) /* Turn SPD ns time into MHZ. Check what the asm does to this math. */ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F))); if (dimm_speed >= glspeed) { + casmap_shift = 1; /* -.5 is a shift of 1 */ /* IF -1 timing is supported, check -1 timing > GeodeLink */ spd_byte = spd_read_byte(DIMM1, SPD_SDRAM_CYCLE_TIME_3RD); if (spd_byte != 0) { /* Turn SPD ns time into MHZ. Check what the asm does to this math. */ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F))); - if (dimm_speed <= glspeed) { - /* set we can use -.5 timing but not -1 */ - spd_byte = 31 - __builtin_clz((uint32_t) casmap1); - /* just want bits in the lower byte since we have to cast to a 32 */ - casmap1 &= 0xFF << (--spd_byte); + if (dimm_speed >= glspeed) { + casmap_shift = 2; /* -1 is a shift of 2 */ } - } /*MIN_CYCLE_10 !=0 */ + /* note that the -1 result doesn't need to change the available CAS map */ + } /* SPD_SDRAM_CYCLE_TIME_3RD (-1) !=0 */ } else { - /* Timing_05 < GLspeed, can't use -.5 or -1 timing */ - spd_byte = 31 - __builtin_clz((uint32_t) casmap1); - /* just want bits in the lower byte since we have to cast to a 32 */ - casmap1 &= 0xFF << (spd_byte); + casmap_shift = 0; } - } /*MIN_CYCLE_05 !=0 */ + } /* SPD_SDRAM_CYCLE_TIME_2ND (-.5) !=0 */ + /* set the casmap based on the shift to limit possible CAS settings */ + spd_byte = 31 - __builtin_clz((uint32_t) casmap1); + /* just want bits in the lower byte since we have to cast to a 32 */ + casmap1 &= 0xFF << (spd_byte - casmap_shift); } else { /* No DIMM */ casmap1 = 0; } -- cgit v1.2.3