From 63f2f721b4c421ba0ad42e6469664eeed126913f Mon Sep 17 00:00:00 2001 From: Eric Biederman Date: Wed, 27 Oct 2004 01:58:26 +0000 Subject: - kill the broken and duplicate 855pm directory. Hopefully I have kept the least broken one. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/intel/855pm/855pm.h | 0 src/northbridge/intel/855pm/Config.lb | 4 - src/northbridge/intel/855pm/chip.h | 5 - src/northbridge/intel/855pm/debug.c | 164 --- src/northbridge/intel/855pm/northbridge.c | 119 -- src/northbridge/intel/855pm/raminit.c | 2091 ----------------------------- src/northbridge/intel/855pm/raminit.h | 11 - src/northbridge/intel/855pm/reset_test.c | 18 - 8 files changed, 2412 deletions(-) delete mode 100644 src/northbridge/intel/855pm/855pm.h delete mode 100644 src/northbridge/intel/855pm/Config.lb delete mode 100644 src/northbridge/intel/855pm/chip.h delete mode 100644 src/northbridge/intel/855pm/debug.c delete mode 100644 src/northbridge/intel/855pm/northbridge.c delete mode 100644 src/northbridge/intel/855pm/raminit.c delete mode 100644 src/northbridge/intel/855pm/raminit.h delete mode 100644 src/northbridge/intel/855pm/reset_test.c (limited to 'src/northbridge') diff --git a/src/northbridge/intel/855pm/855pm.h b/src/northbridge/intel/855pm/855pm.h deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/src/northbridge/intel/855pm/Config.lb b/src/northbridge/intel/855pm/Config.lb deleted file mode 100644 index f101a921fd..0000000000 --- a/src/northbridge/intel/855pm/Config.lb +++ /dev/null @@ -1,4 +0,0 @@ -config chip.h -object northbridge.o -#driver misc_control.o - diff --git a/src/northbridge/intel/855pm/chip.h b/src/northbridge/intel/855pm/chip.h deleted file mode 100644 index d68c782f24..0000000000 --- a/src/northbridge/intel/855pm/chip.h +++ /dev/null @@ -1,5 +0,0 @@ -struct northbridge_intel_855pm_config -{ -}; - -extern struct chip_operations northbridge_intel_855pm_control; diff --git a/src/northbridge/intel/855pm/debug.c b/src/northbridge/intel/855pm/debug.c deleted file mode 100644 index 67670f9844..0000000000 --- a/src/northbridge/intel/855pm/debug.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * generic K8 debug code, used by mainboard specific auto.c - * - */ -#if 1 -static void print_debug_pci_dev(unsigned dev) -{ - print_debug("PCI: "); - print_debug_hex8((dev >> 16) & 0xff); - print_debug_char(':'); - print_debug_hex8((dev >> 11) & 0x1f); - print_debug_char('.'); - print_debug_hex8((dev >> 8) & 7); -} - -static void print_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - print_debug_pci_dev(dev); - print_debug("\r\n"); - } -} - -static void dump_pci_device(unsigned dev) -{ - int i; - print_debug_pci_dev(dev); - print_debug("\r\n"); - - for(i = 0; i <= 255; i++) { - unsigned char val; - if ((i & 0x0f) == 0) { - print_debug_hex8(i); - print_debug_char(':'); - } - val = pci_read_config8(dev, i); - print_debug_char(' '); - print_debug_hex8(val); - if ((i & 0x0f) == 0x0f) { - print_debug("\r\n"); - } - } -} - -static void dump_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - dump_pci_device(dev); - } -} - -static void dump_spd_registers(const struct mem_controller *ctrl) -{ - int i; - print_debug("\r\n"); - for(i = 0; i < 4; i++) { - unsigned device; - device = ctrl->channel0[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } -#if 0 - device = ctrl->channel1[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".1: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } -#endif - } -} -static void dump_smbus_registers(void) -{ - int i; - print_debug("\r\n"); - for(i = 1; i < 0x80; i++) { - unsigned device; - device = i; - int j; - print_debug("smbus: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } -} -#endif diff --git a/src/northbridge/intel/855pm/northbridge.c b/src/northbridge/intel/855pm/northbridge.c deleted file mode 100644 index 20bc17fea1..0000000000 --- a/src/northbridge/intel/855pm/northbridge.c +++ /dev/null @@ -1,119 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "chip.h" - -struct mem_range *sizeram(void) -{ - static struct mem_range mem[4]; - /* the units of tolm are 64 KB */ - /* the units of drb16 are 64 MB */ - uint16_t tolm, remapbase, remaplimit, drb16; - uint16_t tolm_r, remapbase_r, remaplimit_r; - uint8_t drb; - int remap_high; - device_t dev; - - dev = dev_find_slot(0, 0); // d0f0 - if (!dev) { - printk_err("Cannot find PCI: 0:0\n"); - return 0; - } - - /* Calculate and report the top of low memory and - * any remapping. - */ - /* Test if the remap memory high option is set */ - remap_high = 0; -// if(get_option(&remap_high, "remap_memory_high")){ -// remap_high = 0; -// } - printk_debug("remap_high is %d\n", remap_high); - /* get out the value of the highest DRB. This tells the end of - * physical memory. The units are ticks of 64 MB i.e. 1 means - * 64 MB. - */ - drb = pci_read_config8(dev, 0x67); - drb16 = (uint16_t)drb; - if(remap_high && (drb16 > 0x08)) { - /* We only come here if we have at least 512MB of memory, - * so it is safe to hard code tolm. - * 0x2000 means 512MB - */ - - tolm = 0x2000; - /* i.e 0x40 * 0x40 is 0x1000 which is 4 GB */ - if(drb16 > 0x0040) { - /* There is more than 4GB of memory put - * the remap window at the end of ram. - */ - remapbase = drb16; - remaplimit = remapbase + 0x38; - } - else { - remapbase = 0x0040; - remaplimit = remapbase + (drb16-8); - } - } - else { - tolm = (uint16_t)((dev_root.resource[1].base >> 16)&0x0f800); - if((tolm>>8) >= (drb16<<2)) { - tolm = (drb16<<10); - remapbase = 0x3ff; - remaplimit = 0; - } - else { - remapbase = drb16; - remaplimit = remapbase + ((0x0040-(tolm>>10))-1); - } - } - /* Write the ram configruation registers, - * preserving the reserved bits. - */ - tolm_r = pci_read_config16(dev, 0xc4); - tolm |= (tolm_r & 0x7ff); - pci_write_config16(dev, 0xc4, tolm); - remapbase_r = pci_read_config16(dev, 0xc6); - remapbase |= (remapbase_r & 0xfc00); - pci_write_config16(dev, 0xc6, remapbase); - remaplimit_r = pci_read_config16(dev, 0xc8); - remaplimit |= (remaplimit_r & 0xfc00); - pci_write_config16(dev, 0xc8, remaplimit); - -#if 0 - printk_debug("mem info tolm = %x, drb = %x, pci_memory_base = %x, remap = %x-%x\n",tolm,drb,pci_memory_base,remapbase,remaplimit); -#endif - - mem[0].basek = 0; - mem[0].sizek = 640; - mem[1].basek = 768; - /* Convert size in 64K bytes to size in K bytes */ - mem[1].sizek = (tolm << 6) - mem[1].basek; - mem[2].basek = 0; - mem[2].sizek = 0; - if ((drb << 16) > (tolm << 6)) { - /* We don't need to consider the remap window - * here because we put it immediately after the - * rest of ram. - * All we must do is calculate the amount - * of unused memory and report it at 4GB. - */ - mem[2].basek = 4096*1024; - mem[2].sizek = (drb << 16) - (tolm << 6); - } - mem[3].basek = 0; - mem[3].sizek = 0; - - return mem; -} - -struct chip_operations northbridge_intel_855pm_control = { - .name = "intel 855pm Northbridge", -}; diff --git a/src/northbridge/intel/855pm/raminit.c b/src/northbridge/intel/855pm/raminit.c deleted file mode 100644 index eb357f6468..0000000000 --- a/src/northbridge/intel/855pm/raminit.c +++ /dev/null @@ -1,2091 +0,0 @@ - -/* This was originally for the e7500, modified for 855pm - */ - -/* converted to C 6/2004 yhlu */ - -#define DEBUG_RAM_CONFIG 1 - -#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 0)) - -/* DDR DIMM Mode register Definitions */ - -#define BURST_2 (1<<0) -#define BURST_4 (2<<0) -#define BURST_8 (3<<0) - -#define BURST_SEQUENTIAL (0<<3) -#define BURST_INTERLEAVED (1<<3) - -#define CAS_2_0 (0x2<<4) -#define CAS_3_0 (0x3<<4) -#define CAS_1_5 (0x5<<4) -#define CAS_2_5 (0x6<<4) - -#define MODE_NORM (0 << 7) -#define MODE_DLL_RESET (2 << 7) -#define MODE_TEST (1 << 7) - -#define BURST_LENGTH BURST_4 -#define BURST_TYPE BURST_INTERLEAVED -#define CAS_LATENCY CAS_2_0 -//#define CAS_LATENCY CAS_2_5 -//#define CAS_LATENCY CAS_1_5 - -#define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH) -#define EMRS_VALUE 0x000 - -#define MD_SHIFT 4 - -#define RAM_COMMAND_NONE 0x0 -#define RAM_COMMAND_NOP 0x1 -#define RAM_COMMAND_PRECHARGE 0x2 -#define RAM_COMMAND_MRS 0x3 -#define RAM_COMMAND_EMRS 0x4 -#define RAM_COMMAND_CBR 0x6 -#define RAM_COMMAND_NORMAL 0x7 - - -static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t value) { - uint32_t dword; - uint8_t byte; - int i; - uint32_t result; -#if DEBUG_RAM_CONFIG >= 2 - print_debug("P:"); - print_debug_hex8(value); - print_debug("\r\n"); -#endif - /* %ecx - initial address to read from */ - /* Compute the offset */ - dword = value >> 16; - for(i=0;i<8;i++) { - /* Set the ram command */ - byte = pci_read_config8(ctrl->d0, 0x7c); - byte &= 0x8f; - byte |= (uint8_t)(value & 0xff); - pci_write_config8(ctrl->d0, 0x7c, byte); - - /* Assert the command to the memory */ -#if DEBUG_RAM_CONFIG >= 2 - print_debug("R:"); - print_debug_hex32(dword); - print_debug("\r\n"); -#endif - - result = read32(dword); - - /* Go to the next base address */ - dword += 0x04000000; - - } - - /* The command has been sent to all dimms so get out */ -} - - -static inline void RAM_CMD(const struct mem_controller *ctrl, uint32_t command, uint32_t offset) { - uint32_t value = ((offset) << (MD_SHIFT + 16))|((command << 4) & 0x70) ; - do_ram_command(ctrl, value); -} - -#define RAM_NOP(ctrl) RAM_CMD(ctrl, RAM_COMMAND_NOP, 0) -#define RAM_PRECHARGE(ctrl) RAM_CMD(ctrl, RAM_COMMAND_PRECHARGE, 0) -#define RAM_CBR(ctrl) RAM_CMD(ctrl, RAM_COMMAND_CBR, 0) -#define RAM_EMRS(ctrl) RAM_CMD(ctrl, RAM_COMMAND_EMRS, EMRS_VALUE) - -static const uint8_t ram_cas_latency[] = { - CAS_2_5, CAS_2_0, CAS_1_5, CAS_2_5 - }; - -static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){ - /* Read the cas latency setting */ - uint8_t byte; - uint32_t dword; - byte = pci_read_config8(ctrl->d0, 0x78); - /* Transform it into the form expected by SDRAM */ - dword = ram_cas_latency[(byte>>4) & 3]; - - value |= (dword<<(16+MD_SHIFT)); - - value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT); - - do_ram_command(ctrl, value); -} - -#define RAM_MRS(ctrl, dll_reset) ram_mrs( ctrl, (dll_reset << (8+MD_SHIFT+ 16)) | ((RAM_COMMAND_MRS <<4)& 0x70) ) - -static void RAM_NORMAL(const struct mem_controller *ctrl) { - uint8_t byte; - byte = pci_read_config8(ctrl->d0, 0x7c); - byte &= 0x8f; - byte |= (RAM_COMMAND_NORMAL << 4); - pci_write_config8(ctrl->d0, 0x7c, byte); -} - -static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) { - uint8_t byte; - byte = pci_read_config8(ctrl->d0, 0x88); - byte |= (1 << 4 ); - pci_write_config8(ctrl->d0, 0x88, byte); - byte = pci_read_config8(ctrl->d0, 0x88); - byte &= ~(1 << 4); - pci_write_config8(ctrl->d0, 0x88, byte); -} - -static void ENABLE_REFRESH(const struct mem_controller *ctrl) -{ - uint32_t dword; - dword = pci_read_config32(ctrl->d0, 0x7c); - dword |= (1 << 29); - pci_write_config32(ctrl->d0, 0x7c, dword); -} - - /* - * Table: constant_register_values - */ -static const long register_values[] = { - /* SVID - Subsystem Vendor Identification Register - * 0x2c - 0x2d - * [15:00] Subsytem Vendor ID (Indicates system board vendor) - */ - /* SID - Subsystem Identification Register - * 0x2e - 0x2f - * [15:00] Subsystem ID - */ - 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16), - - /* Undocumented - * 0x80 - 0x80 - * This register has something to do with CAS latencies, - * possibily this is the real chipset control. - * At 0x00 CAS latency 1.5 works. - * At 0x06 CAS latency 2.5 works. - * At 0x01 CAS latency 2.0 works. - */ - /* This is still undocumented in e7501, but with different values - * CAS 2.0 values taken from Intel BIOS settings, others are a guess - * and may be terribly wrong. Old values preserved as comments until I - * figure this out for sure. - * e7501 docs claim that CAS1.5 is unsupported, so it may or may not - * work at all. - * Steven James 02/06/2003 - */ -#if CAS_LATENCY == CAS_2_5 -// 0x80, 0xfffffe00, 0x06 /* Intel E7500 recommended */ - 0x80, 0xfffff000, 0x0662, /* from Factory Bios */ -#elif CAS_LATENCY == CAS_2_0 -// 0x80, 0xfffffe00, 0x0d /* values for register 0x80 */ - 0x80, 0xfffff000, 0x0bb1, /* values for register 0x80 */ -#endif - - /* Enable periodic memory recalibration */ - 0x88, 0xffffff00, 0x80, - - /* FDHC - Fixed DRAM Hole Control - * 0x58 - * [7:7] Hole_Enable - * 0 == No memory Hole - * 1 == Memory Hole from 15MB to 16MB - * [6:0] Reserved - * - * PAM - Programmable Attribute Map - * 0x59 [1:0] Reserved - * 0x59 [5:4] 0xF0000 - 0xFFFFF - * 0x5A [1:0] 0xC0000 - 0xC3FFF - * 0x5A [5:4] 0xC4000 - 0xC7FFF - * 0x5B [1:0] 0xC8000 - 0xCBFFF - * 0x5B [5:4] 0xCC000 - 0xCFFFF - * 0x5C [1:0] 0xD0000 - 0xD3FFF - * 0x5C [5:4] 0xD4000 - 0xD7FFF - * 0x5D [1:0] 0xD8000 - 0xDBFFF - * 0x5D [5:4] 0xDC000 - 0xDFFFF - * 0x5E [1:0] 0xE0000 - 0xE3FFF - * 0x5E [5:4] 0xE4000 - 0xE7FFF - * 0x5F [1:0] 0xE8000 - 0xEBFFF - * 0x5F [5:4] 0xEC000 - 0xEFFFF - * 00 == DRAM Disabled (All Access go to memory mapped I/O space) - * 01 == Read Only (Reads to DRAM, Writes to memory mapped I/O space) - * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space) - * 11 == Normal (All Access go to DRAM) - */ - 0x58, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24), - 0x5C, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24), - - /* DRB - DRAM Row Boundary Registers - * 0x60 - 0x6F - * An array of 8 byte registers, which hold the ending - * memory address assigned to each pair of DIMMS, in 64MB - * granularity. - */ - /* Conservatively say each row has 64MB of ram, we will fix this up later */ - 0x60, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24), - 0x64, 0x00000000, (0x05 << 0) | (0x06 << 8) | (0x07 << 16) | (0x08 << 24), - 0x68, 0xffffffff, 0, - 0x6C, 0xffffffff, 0, - - /* DRA - DRAM Row Attribute Register - * 0x70 Row 0,1 - * 0x71 Row 2,3 - * 0x72 Row 4,5 - * 0x73 Row 6,7 - * [7:7] Device width for Odd numbered rows - * 0 == 8 bits wide x8 - * 1 == 4 bits wide x4 - * [6:4] Row Attributes for Odd numbered rows - * 010 == 8KB - * 011 == 16KB - * 100 == 32KB - * 101 == 64KB - * Others == Reserved - * [3:3] Device width for Even numbered rows - * 0 == 8 bits wide x8 - * 1 == 4 bits wide x4 - * [2:0] Row Attributes for Even numbered rows - * 010 == 8KB - * 011 == 16KB - * 100 == 32KB - * 101 == 64KB (This page size appears broken) - * Others == Reserved - */ - 0x70, 0x00000000, - (((0<<3)|(0<<0))<< 0) | - (((0<<3)|(0<<0))<< 4) | - (((0<<3)|(0<<0))<< 8) | - (((0<<3)|(0<<0))<<12) | - (((0<<3)|(0<<0))<<16) | - (((0<<3)|(0<<0))<<20) | - (((0<<3)|(0<<0))<<24) | - (((0<<3)|(0<<0))<<28), - 0x74, 0xffffffff, 0, - - /* DRT - DRAM Time Register - * 0x78 - * [31:30] Reserved - * [29:29] Back to Back Write-Read Turn Around - * 0 == 3 clocks between WR-RD commands - * 1 == 2 clocks between WR-RD commands - * [28:28] Back to Back Read-Write Turn Around - * 0 == 5 clocks between RD-WR commands - * 1 == 4 clocks between RD-WR commands - * [27:27] Back to Back Read Turn Around - * 0 == 4 clocks between RD commands - * 1 == 3 clocks between RD commands - * [26:24] Read Delay (tRD) - * 000 == 7 clocks - * 001 == 6 clocks - * 010 == 5 clocks - * Others == Reserved - * [23:19] Reserved - * [18:16] DRAM idle timer - * 000 == infinite - * 011 == 16 dram clocks - * 001 == Datasheet says reserved, but Intel BIOS sets it - * [15:11] Reserved - * [10:09] Active to Precharge (tRAS) - * 00 == 7 clocks - * 01 == 6 clocks - * 10 == 5 clocks - * 11 == Reserved - * [08:06] Reserved - * [05:04] Cas Latency (tCL) - * 00 == 2.5 Clocks - * 01 == 2.0 Clocks - * 10 == 1.5 Clocks - * 11 == Reserved - * [03:03] Write Ras# to Cas# Delay (tRCD) - * 0 == 3 DRAM Clocks - * 1 == 2 DRAM Clocks - * [02:01] Read RAS# to CAS# Delay (tRCD) - * 00 == reserved - * 01 == reserved - * 10 == 3 DRAM Clocks - * 11 == 2 DRAM Clocks - * [00:00] DRAM RAS# to Precharge (tRP) - * 0 == 3 DRAM Clocks - * 1 == 2 DRAM Clocks - */ -#define DRT_CAS_2_5 (0<<4) -#define DRT_CAS_2_0 (1<<4) -#define DRT_CAS_1_5 (2<<4) -#define DRT_CAS_MASK (3<<4) - -#if CAS_LATENCY == CAS_2_5 -#define DRT_CL DRT_CAS_2_5 -#elif CAS_LATENCY == CAS_2_0 -#define DRT_CL DRT_CAS_2_0 -#elif CAS_LATENCY == CAS_1_5 -#define DRT_CL DRT_CAS_1_5 -#endif - - /* Most aggressive settings possible */ -// 0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|DRT_CL|(1<<3)|(1<<1)|(1<<0), -// 0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), - 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), - - /* FIXME why was I attempting to set a reserved bit? */ - /* 0x0100040f */ - - /* DRC - DRAM Contoller Mode Register - * 0x7c - * [31:30] Reserved - * [29:29] Initialization Complete - * 0 == Not Complete - * 1 == Complete - * [28:23] Reserved - * [22:22] Channels - * 0 == Single channel - * 1 == Dual Channel - * [21:20] DRAM Data Integrity Mode - * 00 == Disabled, no ECC - * 01 == Reserved - * 10 == Error checking, using chip-kill, with correction - * 11 == Reserved - * [19:18] Reserved - * Must equal 01 - * [17:17] (Intel Undocumented) should always be set to 1 - * [16:16] Command Per Clock - Address/Control Assertion Rule (CPC) - * 0 == 2n Rule - * 1 == 1n rule - * [15:11] Reserved - * [10:08] Refresh mode select - * 000 == Refresh disabled - * 001 == Refresh interval 15.6 usec - * 010 == Refresh interval 7.8 usec - * 011 == Refresh interval 64 usec - * 111 == Refresh every 64 clocks (fast refresh) - * [07:07] Reserved - * [06:04] Mode Select (SMS) - * 000 == Self Refresh Mode - * 001 == NOP Command - * 010 == All Banks Precharge - * 011 == Mode Register Set - * 100 == Extended Mode Register Set - * 101 == Reserved - * 110 == CBR Refresh - * 111 == Normal Operation - * [03:00] Reserved - */ -// .long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8), -// .long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8), -// .long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8), - 0x7c, 0xff82fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8), - - - /* Another Intel undocumented register */ - 0x88, 0x080007ff, (1<<31)|(1 << 30)|(1<<28)|(0 << 26)|(0x10 << 21)|(10 << 16)|(0x13 << 11), - - /* CLOCK_DIS - CK/CK# Disable Register - * 0x8C - * [7:4] Reserved - * [3:3] CK3 - * 0 == Enable - * 1 == Disable - * [2:2] CK2 - * 0 == Enable - * 1 == Disable - * [1:1] CK1 - * 0 == Enable - * 1 == Disable - * [0:0] CK0 - * 0 == Enable - * 1 == Disable - */ - 0x8C, 0xfffffff0, 0xf, - - /* TOLM - Top of Low Memory Register - * 0xC4 - 0xC5 - * [15:11] Top of low memory (TOLM) - * The address below 4GB that should be treated as RAM, - * on a 128MB granularity. - * [10:00] Reserved - */ - /* REMAPBASE - Remap Base Address Regsiter - * 0xC6 - 0xC7 - * [15:10] Reserved - * [09:00] Remap Base Address [35:26] 64M aligned - * Bits [25:0] are assumed to be 0. - */ - 0xc4, 0xfc0007ff, (0x2000 << 0) | (0x3ff << 16), - /* REMAPLIMIT - Remap Limit Address Register - * 0xC8 - 0xC9 - * [15:10] Reserved - * [09:00] Remap Limit Address [35:26] 64M aligned - * When remaplimit < remapbase this register is disabled. - */ - 0xc8, 0xfffffc00, 0, - - /* DVNP - Device Not Present Register - * 0xE0 - 0xE1 - * [15:05] Reserved - * [04:04] Device 4 Function 1 Present - * 0 == Present - * 1 == Absent - * [03:03] Device 3 Function 1 Present - * 0 == Present - * 1 == Absent - * [02:02] Device 2 Function 1 Present - * 0 == Present - * 1 == Absent - * [01:01] Reserved - * [00:00] Device 0 Function 1 Present - * 0 == Present - * 1 == Absent - */ - 0xe0, 0xffffffe2, (1<<4)|(1<<3)|(1<<2)|(0<<0), - 0xd8, 0xffff9fff, 0x00000000, - 0xf4, 0x3f8ffffd, 0x40300002, - 0x1050, 0xffffffcf, 0x00000030, -}; - - - /* - * Routine: ram_set_registers - * Arguments: none - * Results: none - * Trashed: %eax, %ebx, %ecx, %edx, %esi, %eflags - * Effects: Do basic ram setup that does not depend on serial - * presence detect information. - * This sets PCI configuration registers to known good - * values based on the table: - * constant_register_values - * Which are a triple of configuration regiser, mask, and value. - * - */ -/* from 1M or 512K */ -#define RCOMP_MMIO 0x100000 - - /* DDR RECOMP table */ - -static const long ddr_rcomp_1[] = { - 0x44332211, 0xc9776655, 0xffffffff, 0xffffffff, - 0x22111111, 0x55444332, 0xfffca876, 0xffffffff, -}; -static const long ddr_rcomp_2[] = { - 0x00000000, 0x76543210, 0xffffeca8, 0xffffffff, - 0x21000000, 0xa8765432, 0xffffffec, 0xffffffff, -}; -static const long ddr_rcomp_3[] = { - 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, - 0x88888888, 0x88888888, 0x88888888, 0x88888888, -}; - -#define rcomp_init_str "Setting RCOMP registers.\r\n" - -static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) { - int i; - uint32_t dword; - for(i=0;i<8;i++) { - dword = read32(src_addr); - write32(dst_addr, dword); - src_addr+=4; - dst_addr+=4; - - } -} - -//#define SLOW_DOWN_IO inb(0x80); -#define SLOW_DOWN_IO udelay(40); - -static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { - uint32_t dword; -#if DEBUG_RAM_CONFIG - print_debug(rcomp_init_str); -#endif - - /*enable access to the rcomp bar */ - dword = pci_read_config32(ctrl->d0, 0x0f4); - dword &= ~(1<<31); - dword |=((1<<30)|1<<22); - pci_write_config32(ctrl->d0, 0x0f4, dword); - - - /* Set the MMIO address to 512K */ - pci_write_config32(ctrl->d0, 0x14, RCOMP_MMIO); - - dword = read32(RCOMP_MMIO + 0x20); - dword |= (1<<9); - write32(RCOMP_MMIO + 0x20, dword); - - - /* Begin to write the RCOMP registers */ - - write8(RCOMP_MMIO + 0x2c, 0xff); - write32(RCOMP_MMIO + 0x30, 0x01040444); - write8(RCOMP_MMIO + 0x34, 0x04); - write32(RCOMP_MMIO + 0x40, 0); - write16(RCOMP_MMIO + 0x44, 0); - write16(RCOMP_MMIO + 0x48, 0); - write16(RCOMP_MMIO + 0x50, 0); - write_8dwords((uint32_t)ddr_rcomp_1, RCOMP_MMIO + 0x60); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x80); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0xa0); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x140); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x1c0); - write_8dwords((uint32_t)ddr_rcomp_3, RCOMP_MMIO + 0x180); - -#if 0 /* Print the RCOMP registers */ - movl $RCOMP_MMIO, %ecx -1: movl %ecx, %eax - andb $0x0f, %al - jnz 2f - CONSOLE_INFO_TX_CHAR($'\r') - CONSOLE_INFO_TX_CHAR($'\n') - CONSOLE_INFO_TX_HEX32(%ecx) - CONSOLE_INFO_TX_CHAR($' ') - CONSOLE_INFO_TX_CHAR($'-') - CONSOLE_INFO_TX_CHAR($' ') -2: movl (%ecx), %eax - CONSOLE_INFO_TX_HEX32(%eax) - CONSOLE_INFO_TX_CHAR($' ') - addl $4, %ecx - cmpl $(RCOMP_MMIO + 0x1e0), %ecx - jnz 1b - CONSOLE_INFO_TX_CHAR($'\r') - CONSOLE_INFO_TX_CHAR($'\n') -#endif - - dword = read32(RCOMP_MMIO + 0x20); - dword &= ~(3); - dword |= 1; - write32(RCOMP_MMIO + 0x20, dword); - - /* Wait 40 usec */ - SLOW_DOWN_IO; - - /* unblock updates */ - dword = read32(RCOMP_MMIO + 0x20); - dword &= ~(1<<9); - write32(RCOMP_MMIO+0x20, dword); - dword |= (1<<8); - write32(RCOMP_MMIO+0x20, dword); - dword &= ~(1<<8); - write32(RCOMP_MMIO+0x20, dword); - - /* Wait 40 usec */ - SLOW_DOWN_IO; - - /*disable access to the rcomp bar */ - dword = pci_read_config32(ctrl->d0, 0x0f4); - dword &= ~(1<<22); - pci_write_config32(ctrl->d0, 0x0f4, dword); - -} - -static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { -#if DEBUG_RAM_CONFIG - dumpnorth(); -#endif - int i; - int max; - max = sizeof(register_values)/sizeof(register_values[0]); - for(i = 0; i < max; i += 3) { - uint32_t reg; -#if DEBUG_RAM_CONFIG - print_debug_hex32(register_values[i]); - print_debug(" <-"); - print_debug_hex32(register_values[i+2]); - print_debug("\r\n"); -#endif - reg = pci_read_config32(ctrl->d0,register_values[i]); - reg &= register_values[i+1]; - reg |= register_values[i+2] & ~(register_values[i+1]); - pci_write_config32(ctrl->d0,register_values[i], reg); - - - } -#if DEBUG_RAM_CONFIG - dumpnorth(); -#endif -} -static void sdram_set_registers(const struct mem_controller *ctrl){ - ram_set_rcomp_regs(ctrl); - ram_set_d0f0_regs(ctrl); -} - - - /* - * Routine: sdram_spd_get_page_size - * Arguments: %bl SMBUS_MEM_DEVICE - * Results: - * %edi log base 2 page size of DIMM side 1 in bits - * %esi log base 2 page size of DIMM side 2 in bits - * - * Preserved: %ebx (except %bh), %ebp - * - * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags - * - * Effects: Uses serial presence detect to set %edi & %esi - * to the page size of a dimm. - * Notes: - * %bl SMBUS_MEM_DEVICE - * %edi holds the page size for the first side of the DIMM. - * %esi holds the page size for the second side of the DIMM. - * memory size is represent as a power of 2. - * - * This routine may be worth moving into generic code somewhere. - */ -struct dimm_page_size { - unsigned long side1; - unsigned long side2; -}; - -static struct dimm_page_size sdram_spd_get_page_size(unsigned device) { - - uint32_t ecx; - int value; - struct dimm_page_size pgsz; - - pgsz.side1 = 0; - pgsz.side2 = 0; - - value = spd_read_byte(device, 4); /* columns */ - if(value < 0) goto hw_err; - pgsz.side1 = value & 0xf; - - /* Get the module data width and convert it to a power of two */ - value = spd_read_byte(device,7); /* (high byte) */ - if(value < 0) goto hw_err; - ecx = value & 0xff; - ecx <<= 8; - - value = spd_read_byte(device, 6); /* (low byte) */ - if(value < 0) goto hw_err; - ecx |= (value & 0xff); - - pgsz.side1 += log2(ecx); /* compute cheap log base 2 */ - - /* side two */ - value = spd_read_byte(device, 5); /* number of physical banks */ - if(value < 0) goto hw_err; - if(value==1) goto out; - if(value!=2) goto val_err; - - /* Start with the symmetrical case */ - pgsz.side2 = pgsz.side1; - value = spd_read_byte(device,4); /* columns */ - if(value < 0) goto hw_err; - if((value & 0xf0)==0 ) goto out; - pgsz.side2 -=value & 0xf; /* Subtract out columns on side 1 */ - pgsz.side2 +=(value>>4)& 0xf; /* Add in columns on side 2 */ - goto out; - - val_err: - die("Bad SPD value\r\n"); - /* If an hw_error occurs report that I have no memory */ -hw_err: - pgsz.side1 = 0; - pgsz.side2 = 0; -out: - return pgsz; -} - - - /* - * Routine: sdram_spd_get_width - * Arguments: %bl SMBUS_MEM_DEVICE - * Results: - * %edi width of SDRAM chips on DIMM side 1 in bits - * %esi width of SDRAM chips on DIMM side 2 in bits - * - * Preserved: %ebx (except %bh), %ebp - * - * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags - * - * Effects: Uses serial presence detect to set %edi & %esi - * to the width of a dimm. - * Notes: - * %bl SMBUS_MEM_DEVICE - * %edi holds the width for the first side of the DIMM. - * %esi holds the width for the second side of the DIMM. - * memory size is represent as a power of 2. - * - * This routine may be worth moving into generic code somewhere. - */ -struct dimm_width { - unsigned side1; - unsigned side2; -}; - -static struct dimm_width sdram_spd_get_width(unsigned device) { - int value; - struct dimm_width wd; - uint32_t ecx; - - wd.side1 = 0; - wd.side2 = 0; - - value = spd_read_byte(device, 13); /* sdram width */ - if(value < 0 ) goto hw_err; - ecx = value; - - wd.side1 = value & 0x7f; - - /* side two */ - value = spd_read_byte(device, 5); /* number of physical banks */ - if(value < 0 ) goto hw_err; - if(value <=1 ) goto out; - - /* Start with the symmetrical case */ - wd.side2 = wd.side1; - - if((ecx & 0x80)==0) goto out; - - wd.side2 <<=1; -hw_err: - wd.side1 = 0; - wd.side2 = 0; - - out: - return wd; -} - - /* - * Routine: sdram_spd_get_dimm_size - * Arguments: %bl SMBUS_MEM_DEVICE - * Results: - * %edi log base 2 size of DIMM side 1 in bits - * %esi log base 2 size of DIMM side 2 in bits - * - * Preserved: %ebx (except %bh), %ebp - * - * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags - * - * Effects: Uses serial presence detect to set %edi & %esi - * the size of a dimm. - * Notes: - * %bl SMBUS_MEM_DEVICE - * %edi holds the memory size for the first side of the DIMM. - * %esi holds the memory size for the second side of the DIMM. - * memory size is represent as a power of 2. - * - * This routine may be worth moving into generic code somewhere. - */ - -struct dimm_size { - unsigned long side1; - unsigned long side2; -}; - -static struct dimm_size spd_get_dimm_size(unsigned device) -{ - /* Calculate the log base 2 size of a DIMM in bits */ - struct dimm_size sz; - int value, low; - sz.side1 = 0; - sz.side2 = 0; - - /* Note it might be easier to use byte 31 here, it has the DIMM size as - * a multiple of 4MB. The way we do it now we can size both - * sides of an assymetric dimm. - */ - value = spd_read_byte(device, 3); /* rows */ - if (value < 0) goto hw_err; -// if ((value & 0xf) == 0) goto val_err; - sz.side1 += value & 0xf; - - value = spd_read_byte(device, 4); /* columns */ - if (value < 0) goto hw_err; -// if ((value & 0xf) == 0) goto val_err; - sz.side1 += value & 0xf; - - value = spd_read_byte(device, 17); /* banks */ - if (value < 0) goto hw_err; -// if ((value & 0xff) == 0) goto val_err; - value &=0xff; - sz.side1 += log2(value); - - /* Get the module data width and convert it to a power of two */ - value = spd_read_byte(device, 7); /* (high byte) */ - if (value < 0) goto hw_err; - value &= 0xff; - value <<= 8; - - low = spd_read_byte(device, 6); /* (low byte) */ - if (low < 0) goto hw_err; - value |= (low & 0xff); -// if ((value != 72) && (value != 64)) goto val_err; - sz.side1 += log2(value); - - /* side 2 */ - value = spd_read_byte(device, 5); /* number of physical banks */ - if (value < 0) goto hw_err; - if (value == 1) goto out; -// if (value != 2) goto val_err; - - /* Start with the symmetrical case */ - sz.side2 = sz.side1; - - value = spd_read_byte(device, 3); /* rows */ - if (value < 0) goto hw_err; - if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */ - sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */ - sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */ - - value = spd_read_byte(device, 4); /* columns */ - if (value < 0) goto hw_err; -// if ((value & 0xff) == 0) goto val_err; - sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */ - sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */ - goto out; - - val_err: - die("Bad SPD value\r\n"); - /* If an hw_error occurs report that I have no memory */ -hw_err: - sz.side1 = 0; - sz.side2 = 0; - out: - return sz; -} - - - - /* - * This is a place holder fill this out - * Routine: spd_set_row_attributes - * Arguments: %bl SMBUS_MEM_DEVICE - * Results: - * %edi log base 2 size of DIMM side 1 in bits - * %esi log base 2 size of DIMM side 2 in bits - * - * Preserved: %ebx (except %bh), %ebp - * - * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags - * - * Effects: Uses serial presence detect to set %edi & %esi - * the size of a dimm. - * Notes: - * %bl SMBUS_MEM_DEVICE - * %edi holds the memory size for the first side of the DIMM. - * %esi holds the memory size for the second side of the DIMM. - * memory size is represent as a power of 2. - * - * This routine may be worth moving into generic code somewhere. - */ -static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_mask) { - int i; - uint32_t dword=0; - int value; - - - /* Walk through all dimms and find the interesection of the support - * for ecc sdram and refresh rates - */ - - - for(i = 0; i < DIMM_SOCKETS; i++) { - if (!(dimm_mask & (1 << i))) { - continue; - } - /* Test to see if I have ecc sdram */ - struct dimm_page_size sz; - sz = sdram_spd_get_page_size(ctrl->channel0[i]); /* SDRAM type */ -#if DEBUG_RAM_CONFIG - print_debug("page size ="); - print_debug_hex32(sz.side1); - print_debug(" "); - print_debug_hex32(sz.side2); - print_debug("\r\n"); -#endif - - /* Test to see if the dimm is present */ - if( sz.side1 !=0) { - - /* Test for a valid dimm width */ - if((sz.side1 <15) || (sz.side1>18) ) { - print_err("unsupported page size\r\n"); - } - - /* double because I have 2 channels */ - sz.side1++; - - /* Convert to the format needed for the DRA register */ - sz.side1-=14; - - /* Place in the %ebp the dra place holder */ //i - dword |= sz.side1<<(i<<3); - - /* Test to see if the second side is present */ - - if( sz.side2 !=0) { - - /* Test for a valid dimm width */ - if((sz.side2 <15) || (sz.side2>18) ) { - print_err("unsupported page size\r\n"); - } - - /* double because I have 2 channels */ - sz.side2++; - - /* Convert to the format needed for the DRA register */ - sz.side2-=14; - - /* Place in the %ebp the dra place holder */ //i - dword |= sz.side2<<((i<<3) + 4 ); - - } - } - - /* Now add the SDRAM chip width to the DRA */ - struct dimm_width wd; - wd = sdram_spd_get_width(ctrl->channel0[i]); - -#if DEBUG_RAM_CONFIG - print_debug("width ="); - print_debug_hex32(wd.side1); - print_debug(" "); - print_debug_hex32(wd.side2); - print_debug("\r\n"); -#endif - - if(wd.side1 == 0) continue; - if(wd.side1 == 4) { - /* Enable an x4 device */ - dword |= 0x08 << (i<<3); - } - - if(wd.side2 == 0) continue; - if(wd.side2 == 4) { - /* Enable an x4 device */ - dword |= 0x08 << ((i<<3 ) + 4); - } - - /* go to the next DIMM */ - } - - /* Write the new row attributes register */ - pci_write_config32(ctrl->d0, 0x70, dword); - - return dimm_mask; - -} -#if 0 - /* - * Routine: sdram_read_paired_byte - * Arguments: %esp return address - * %bl device on the smbus to read from - * %bh address on the smbus to read - * Results: - * zf clear - * byte read in %al - * On Error: - * zf set - * %eax trashed - * - * Preserved: %ebx, %esi, %edi - * - * Trashed: %eax, %ecx, %edx, %ebp, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %esp, %eflags - * - * Effects: Reads two spd bytes from both ram channesl - * and errors if they are not equal. - * It then returns the equal result. - */ -static spd_read_paired_byte () { - movl %esp, %ebp - CALLSP(smbus_read_byte) - setnz %cl - movb %al, %ch - addb $(SMBUS_MEM_CHANNEL_OFF), %bl - CALLSP(smbus_read_byte) - movb %ch, %ah - setnz %ch - subb $(SMBUS_MEM_CHANNEL_OFF), %bl - - /* See if dimms on both sides are equally present */ - cmp %cl, %ch - jne sdram_presence_mismatch - - /* Leave if I have no data */ - testb %cl, %cl - jz spd_verify_byte_out - - /* Verify the data is identical */ - cmp %ah, %al - jne sdram_value_mismatch - - /* Clear the zero flag */ - testb %cl, %cl -spd_verify_byte_out: - movl %ebp, %esp - RETSP -} - - /* - * Routine: spd_verify_dimms - * Arguments: none - * Results: none - * Preserved: none - * Trashed: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags - * - * Effects: - * - Verify all interesting spd information - * matches for both dimm channels. - * - Additional error checks that can be easily done - * here are computed as well, so I don't need to - * worry about them later. - */ -static spd_verify_dimms() { - movl $(SMBUS_MEM_DEVICE_START), %ebx -spd_verify_dimm: - /* Verify this is DDR SDRAM */ - movb $2, %bh - CALLSP(spd_read_paired_byte) - jz spd_verify_next_dimm - cmpb $7, %al - jne invalid_dimm_type - - /* Verify the row addresses */ - movb $3, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0x0f, %al - jz spd_invalid_data - - /* Column addresses */ - movb $4, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0xf, %al - jz spd_invalid_data - - /* Physical Banks */ - movb $5, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - cmp $1, %al - jb spd_invalid_data - cmp $2, %al - ja spd_invalid_data - - /* Module Data Width */ - movb $7, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - cmpb $0, %al - jne spd_invalid_data - - movb $6, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - cmpb $64, %al - je 1f - cmpb $72, %al - je 1f - jmp spd_unsupported_data -1: - - /* Cycle time at highest CAS latency CL=X */ - movb $9, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* SDRAM type */ - movb $11, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* Refresh Interval */ - movb $12, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* SDRAM Width */ - movb $13, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - andb $0x7f, %al - cmpb $4, %al - je 1f - cmpb $8, %al - je 1f - jmp spd_unsupported_data -1: - - /* Back-to-Back Random Column Accesses */ - movb $15, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb %al, %al - jz spd_invalid_data - cmpb $4, %al - ja spd_unsupported_data - - /* Burst Lengths */ - movb $16, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $(1<<2), %al - jz spd_unsupported_data - - /* Logical Banks */ - movb $17, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb %al, %al - jz spd_invalid_data - - /* Supported CAS Latencies */ - movb $18, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $(1 << 1), %al /* CL 1.5 */ - jnz 1f - testb $(1 << 2), %al /* CL 2.0 */ - jnz 1f - testb $(1 << 3), %al /* CL 2.5 */ - jnz 1f - jmp spd_unsupported_data -1: - - /* Cycle time at Cas Latency (CLX - 0.5) */ - movb $23, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* Cycle time at Cas Latency (CLX - 1.0) */ - movb $26, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* tRP Row precharge time */ - movb $27, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0xfc, %al - jz spd_invalid_data - - - /* tRCD RAS to CAS */ - movb $29, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0xfc, %al - jz spd_invalid_data - - /* tRAS Activate to Precharge */ - movb $30, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb %al, %al - jz spd_invalid_data - - /* Module Bank Density */ - movb $31, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $(1<<2), %al /* 16MB */ - jnz spd_unsupported_data - testb $(1<<3), %al - jnz spd_unsupported_data /* 32MB */ - - /* Address and Command Hold Time After Clock */ - movb $33, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - -spd_verify_next_dimm: - /* go to the next DIMM */ - addb $(SMBUS_MEM_DEVICE_INC), %bl /* increment the smbus device */ - cmpb $SMBUS_MEM_DEVICE_END, %bl - jbe spd_verify_dimm -spd_verify_dimms_out: - RET_LABEL(spd_verify_dimms) -} -#endif -#define spd_pre_init "Reading SPD data...\r\n" -#define spd_pre_set "setting based on SPD data...\r\n" -#define spd_post_init "done\r\n" - - -static const uint32_t refresh_rate_rank[]= { - /* Refresh rates ordered from most conservative (lowest) - * to most agressive (highest) - * disabled 0 -> rank 3 - * 15.6usec 1 -> rank 1 - * 7.8 usec 2 -> rank 0 - * 64usec 3 -> rank 2 - */ - 3, 1, 0, 2 }; -static const uint32_t refresh_rate_index[] = { - /* Map the spd refresh rates to memory controller settings - * 15.625us -> 15.6us - * 3.9us -> err - * 7.8us -> 7.8us - * 31.3s -> 15.6us - * 62.5us -> 15.6us - * 125us -> 64us - */ - 1, 0xff, 2, 1, 1, 3 -}; -#define MAX_SPD_REFRESH_RATE 5 - -static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, long dimm_mask) { - - int i; - uint32_t dword; - int value; - uint32_t ecx; - uint32_t edx; - - /* Read the inititial state */ - dword = pci_read_config32(ctrl->d0, 0x7c); - -#if 0 - /* Test if ECC cmos option is enabled */ - movb $RTC_BOOT_BYTE, %al - outb %al, $0x70 - inb $0x71, %al - testb $(1<<2), %al - jnz 1f - /* Clear the ecc enable */ - andl $~(3 << 20), %esi -1: -#endif - - - /* Walk through all dimms and find the interesection of the support - * for ecc sdram and refresh rates - */ - - - for(i = 0; i < DIMM_SOCKETS; i++) { - if (!(dimm_mask & (1 << i))) { - continue; - } - /* Test to see if I have ecc sdram */ - value = spd_read_byte(ctrl->channel0[i], 11); /* SDRAM type */ - if(value < 0) continue; - if(value !=2 ) { - /* Clear the ecc enable */ - dword &= ~(3 << 20); - } - value = spd_read_byte(ctrl->channel0[i], 12); /* SDRAM refresh rate */ - if(value < 0 ) continue; - value &= 0x7f; - if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");} -// if(value == 0xff) { print_err("unsupported refresh rate\r\n");} - - ecx = refresh_rate_index[value]; - - /* Isolate the old refresh rate setting */ - /* Load the refresh rate ranks */ - edx = refresh_rate_rank[(dword >> 8) & 3]<<8; - edx |= refresh_rate_rank[ecx] & 0xff; - - /* See if the new refresh rate is more conservative than the old - * refresh rate setting. (Lower ranks are more conservative) - */ - if((edx & 0xff)< ((edx >> 8) & 0xff) ) { - /* Clear the old refresh rate */ - dword &= ~(3<<8); - /* Move in the new refresh rate */ - dword |= (ecx<<8); - } - - value = spd_read_byte(ctrl->channel0[i], 33); /* Address and command hold time after clock */ - if(value < 0) continue; - if(value >= 0xa0) { /* At 133Mhz this constant should be 0x75 */ - dword &= ~(1<<16); /* Use two clock cyles instead of one */ - } - - /* go to the next DIMM */ - } - - /* Now write the controller mode */ - pci_write_config32(ctrl->d0, 0x7c, dword); - - return dimm_mask; - -} -static long spd_enable_clocks(const struct mem_controller *ctrl, long dimm_mask) -{ - int i; - uint32_t dword; - int value; - - /* Read the inititial state */ - dword = pci_read_config32(ctrl->d0, 0x8c); -#if 0 -# Intel clears top bit here, should we? -# No the default is on and for normal timming it should be on. Tom Z - andl $0x7f, %esi -#endif - - - for(i = 0; i < DIMM_SOCKETS; i++) { - if (!(dimm_mask & (1 << i))) { - continue; - } - /* Read any spd byte to see if the dimm is present */ - value = spd_read_byte(ctrl->channel0[i], 5); /* Physical Banks */ - if(value < 0) continue; - - dword &= ~(1<d0, 0x8c, dword); - - return dimm_mask; -} - -static const uint16_t cas_latency_80[] = { - /* For cas latency 2.0 0x01 works and until I see a large test sample - * I am not prepared to change this value, to the intel recommended value - * of 0x0d. Eric Biederman - */ - /* The E7501 requires b1 rather than 01 for CAS2 or memory will be hosed - * CAS 1.5 is claimed to be unsupported, will try to test that - * will need to determine correct values for other CAS values - * (perhaps b5, b1, b6?) - * Steven James 02/06/2003 - */ - -//# .byte 0x05, 0x01, 0x06 -//# .byte 0xb5, 0xb1, 0xb6 - 0x0, 0x0bb1, 0x0662 /* RCVEN */ -}; -static const uint16_t cas_latency_80_4dimms[] = { - 0x0, 0x0bb1, 0x0882 -}; - - -static const uint8_t cas_latency_78[] = { - DRT_CAS_1_5, DRT_CAS_2_0, DRT_CAS_2_5 -}; - -static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mask) { - /* Walk through all dimms and find the interesection of the - * supported cas latencies. - */ - int i; - /* Initially allow cas latencies 2.5, 2.0 - * which the chipset supports. - */ - uint32_t dword = (1<<3)| (1<<2);// esi - uint32_t edi; - uint32_t ecx; - unsigned device; - int value; - uint8_t byte; - uint16_t word; - - - for(i = 0; i < DIMM_SOCKETS; i++) { - if (!(dimm_mask & (1 << i))) { - continue; - } - value = spd_read_byte(ctrl->channel0[i], 18); - if(value < 0) continue; - /* Find the highest supported cas latency */ - ecx = log2(value & 0xff); - edi = (1<< ecx); - - /* Remember the supported cas latencies */ - ecx = (value & 0xff); - - /* Verify each cas latency at 133Mhz */ - /* Verify slowest/highest CAS latency */ - value = spd_read_byte(ctrl->channel0[i], 9); - if(value < 0 ) continue; - if(value > 0x75 ) { - /* The bus is too fast so we cannot support this case latency */ - ecx &= ~edi; - } - - /* Verify the highest CAS latency - 0.5 clocks */ - edi >>= 1; - if(edi != 0) { - value = spd_read_byte(ctrl->channel0[i], 23); - if(value < 0 ) continue; - if(value > 0x75) { - /* The bus is too fast so we cannot support this cas latency */ - ecx &= ~edi; - } - } - - /* Verify the highest CAS latency - 1.0 clocks */ - edi >>=1; - if(edi !=0) { - value = spd_read_byte(ctrl->channel0[i], 25); - if(value < 0 ) continue; - if(value > 0x75) { - /* The bus is too fast so we cannot support this cas latency */ - ecx &= ~edi; - } - } - - /* Now find which cas latencies are supported for the bus */ - dword &= ecx; - /* go to the next DIMM */ - } - - /* After all of the arduous calculation setup with the fastest - * cas latency I can use. - */ - value = __builtin_bsf(dword); // bsrl = log2 how about bsfl? - if(value ==0 ) return -1; - ecx = value -1; - - byte = pci_read_config8(ctrl->d0, 0x78); - byte &= ~(DRT_CAS_MASK); - byte |= cas_latency_78[ecx]; - pci_write_config8(ctrl->d0,0x78, byte); - - /* set master DLL reset */ - dword = pci_read_config32(ctrl->d0, 0x88); - dword |= (1<<26); - - /* the rest of the references are words */ -// ecx<<=1; // don't need shift left, because we already define that in u16 array - pci_write_config32(ctrl->d0, 0x88, dword); - - - dword &= 0x0c0000ff; /* patch try register 88 is undocumented tnz */ - dword |= 0xd2109800; - - pci_write_config32(ctrl->d0, 0x88, dword); - - word = pci_read_config16(ctrl->d0, 0x80); - word &= ~(0x0fff); - word |= cas_latency_80[ecx]; - - dword = pci_read_config32(ctrl->d0, 0x70); - - if((dword & 0xff) !=0 ) { - dword >>=8; - if((dword & 0xff)!=0) { - dword >>=8; - if((dword & 0xff)!=0) { - dword >>= 8; - if( (dword & 0xff)!=0) { - word &=~(0x0fff); /* we have dimms in all 4 slots */ - word |=cas_latency_80_4dimms[ecx]; - } - } - } - } - - pci_write_config16(ctrl->d0, 0x80, word); - - dword = pci_read_config32(ctrl->d0, 0x88); /* reset master DLL reset */ - dword &= ~(1<<26); - pci_write_config32(ctrl->d0, 0x88, dword); - - RAM_RESET_DDR_PTR(ctrl); - - return dimm_mask; - -} - -static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mask) { - /* Walk through all dimms and find the interesection of the - * supported dram timings. - */ - - int i; - uint32_t dword; - int value; - - /* Read the inititial state */ - dword = pci_read_config32(ctrl->d0, 0x78); -#if 0 -# Intel clears top bit here, should we? -# No the default is on and for normal timming it should be on. Tom Z - andl $0x7f, %esi -#endif - - - for(i = 0; i < DIMM_SOCKETS; i++) { - if (!(dimm_mask & (1 << i))) { - continue; - } - /* Trp */ - value = spd_read_byte(ctrl->channel0[i], 27); - if(value < 0) continue; - if(value > (15<<2)) { - /* At 133Mhz if row precharge time is above than 15ns than we - * need 3 clocks not 2 clocks. - */ - dword &= ~(1<<0); - } - /* Trcd */ - value = spd_read_byte(ctrl->channel0[i],29); - if(value < 0 ) continue; - if(value > (15<<2)) { - /* At 133Mhz if the Minimum ras to cas delay is about 15ns we - * need 3 clocks not 2 clocks. - */ - dword &= ~((1<<3)|(1<<1)); - } - /* Tras */ - value = spd_read_byte(ctrl->channel0[i],30); - if(value < 0 ) continue; - /* Convert tRAS from ns to 133Mhz clock cycles */ - value <<=1; /* mult by 2 to make 7.5 15 */ - value += 15; /* Make certain we round up */ - value --; - value &= 0xff; /* Clear the upper bits of eax */ - value /= 15; - - /* Don't even process small timings */ - if(value >5) { - uint32_t tmp; - /* Die if the value is to large */ - if(value>7) { - die ("unsupported_rcd\r\n"); - } - /* Convert to clocks - 5 */ - value -=5; - /* Convert the existing value into clocks - 5 */ - tmp = (~((dword>>9) & 3) - 1) & 3; - /* See if we need a slower timing */ - if(value > tmp ) { - /* O.k. put in our slower timing */ - dword &= ~(3<<9); - dword |= ((~(value + 1)) & 3)<<9 ; - } - } - - /* Trd */ - /* Set to a 7 clock read delay. This is for 133Mhz - * with a CAS latency of 2.5 if 2.0 a 6 clock - * delay is good */ - if( (pci_read_config8(ctrl->d0, 0x78) & 0x30) ==0 ){ - dword &= ~(7<<24); /* CAS latency is 2.5, make 7 clks */ - } - - /* - * Back to Back Read Turn Around - */ - /* Set to a 3 clock back to back read turn around. This - * is good for CAS latencys 2.5 and 2.0 */ - dword |= (1<<27); - /* - * Back to Back Read-Write Turn Around - */ - /* Set to a 5 clock back to back read to write turn around. - * 4 is a good delay if the CAS latency is 2.0 */ - if( ( pci_read_config8(ctrl->d0, 0x78) & (1<<4)) == 0) { - dword &= ~(1<<28); - } - /* - * Back to Back Write-Read Turn Around - */ - /* Set to a 2 clock back to back write to read turn around. - * This is good for 2.5 and 2.0 CAS Latencies. */ - dword |= (1<<29); - } - - pci_write_config32(ctrl->d0, 0x78, dword); - - return dimm_mask; - -} -static unsigned int spd_detect_dimms(const struct mem_controller *ctrl) -{ - unsigned dimm_mask; - int i; - dimm_mask = 0; -#if DEBUG_RAM_CONFIG - print_debug("spd_detect_dimms:\r\n"); -#endif - for(i = 0; i < DIMM_SOCKETS; i++) { - int byte; - unsigned device; -#if DEBUG_RAM_CONFIG - print_debug_hex32(i); - print_debug("\r\n"); -#endif - device = ctrl->channel0[i]; - if (device) { - byte = spd_read_byte(ctrl->channel0[i], 2); /* Type */ - if (byte == 7) { - dimm_mask |= (1 << i); - } - } -#if 1 - device = ctrl->channel1[i]; - if (device) { - byte = spd_read_byte(ctrl->channel1[i], 2); - if (byte == 7) { - dimm_mask |= (1 << (i + DIMM_SOCKETS)); - } - } -#endif - } -#if 1 - i = (dimm_mask>>DIMM_SOCKETS); - if(i != (dimm_mask & ( (1<= (25 + 4)) { - memsz += (1 << (sz.side1 - (25 + 4)) ) ; - } - /* Write the size of side 1 of the dimm */ - byte = memsz; - pci_write_config8(ctrl->d0, 0x60+(index<<1), byte); - - /* Make certain side2 of the dimm is at least 64MB */ - if (sz.side2 >= (25 + 4)) { - memsz += (1 << (sz.side2 - (25 + 4)) ) ; - } - - /* Write the size of side 2 of the dimm */ - byte = memsz; - pci_write_config8(ctrl->d0, 0x61+(index<<1), byte); - - /* now, fill in DRBs where no physical slot exists */ - - for(i=index+1;i<4;i++) { - pci_write_config8(ctrl->d0, 0x60+(i<<1),byte); - pci_write_config8(ctrl->d0, 0x61+(i<<1),byte); - - } - - return memsz; - -} -/* LAST_DRB_SLOT is a constant for any E7500 board */ -#define LAST_DRB_SLOT 0x67 - -static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask) -{ - int i; - uint32_t memsz=0; - uint16_t word; - - for(i = 0; i < DIMM_SOCKETS; i++) { - struct dimm_size sz; - if (!(dimm_mask & (1 << i))) { - continue; - } - sz = spd_get_dimm_size(ctrl->channel0[i]); -#if DEBUG_RAM_CONFIG - print_debug("dimm size ="); - print_debug_hex32(sz.side1); - print_debug(" "); - print_debug_hex32(sz.side2); - print_debug("\r\n"); -#endif - - if (sz.side1 == 0) { - return -1; /* Report SPD error */ - } - memsz = set_dimm_size(ctrl, sz, memsz, i); - } - /* For now hardset everything at 128MB boundaries */ - /* %ebp has the ram size in multiples of 64MB */ -// cmpl $0, %ebp /* test if there is no mem - smbus went bad */ -// jz no_memory_bad_smbus - if(memsz < 0x30) { - /* I should really adjust all of this in C after I have resources - * to all of the pcie devices. - */ - - /* Round up to 128M granularity */ - memsz++; - memsz &= 0xfe; - memsz<<= 10; - word = memsz; - pci_write_config16(ctrl->d0, 0xc4, word); - } else { - - /* FIXME will this work with 3.5G of ram? */ - /* Put TOLM at 3G */ - pci_write_config16(ctrl->d0, 0xc4, 0xc000); - /* Hard code a 1G remap window, right after the ram */ - if(memsz< 0x40){ - word = 0x40; /* Ensure we are over 4G */ - } else { - word = memsz; - } - pci_write_config16(ctrl->d0, 0xc6, word); - word += 0x10; - pci_write_config16(ctrl->d0, 0xc8, word); - - } - - return dimm_mask; -} - -static void sdram_set_spd_registers(const struct mem_controller *ctrl) { - long dimm_mask; -#if DEBUG_RAM_CONFIG - print_debug(spd_pre_init); -#endif - //activate_spd_rom(ctrl); - dimm_mask = spd_detect_dimms(ctrl); - if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { - print_debug("No memory for this controller\n"); - return; - } - dimm_mask = spd_enable_clocks(ctrl, dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - //spd_verify_dimms(ctrl); -#if DEBUG_RAM_CONFIG - print_debug(spd_pre_set); -#endif - dimm_mask = spd_set_row_attributes(ctrl,dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - dimm_mask = spd_set_dram_controller_mode(ctrl,dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - dimm_mask = spd_set_cas_latency(ctrl,dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - dimm_mask = spd_set_dram_timing(ctrl,dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; -#if DEBUG_RAM_CONFIG - print_debug(spd_post_init); -#endif - //moved from dram_post_init - spd_set_ram_size(ctrl, dimm_mask); - return; - hw_spd_err: - /* Unrecoverable error reading SPD data */ - print_err("SPD error - reset\r\n"); - hard_reset(); - return; -} - - - /* I have finally seen ram bad enough to cause LinuxBIOS - * to die in mysterious ways, before booting up far - * enough to run a memory tester. This code attempts - * to catch this blatantly bad ram, with a spot check. - * For most cases you should boot all of the way up - * and run a memory tester. - */ - /* Ensure I read/write each stick of bank of memory && - * that I do more than 1000 bytes to avoid the northbridge cache. - * Only 64M of each side of each DIMM is currently mapped, - * so we can handle > 4GB of ram here. - */ -#if 0 -#define bank_msg "Bank " -#define side_msg " Side " -static void verify_ram() { - xorl %ecx, %ecx - /* Check to see if the RAM is present, - * in the specified bank and side. - */ -1: movl %ecx, %ebx - shrl $1, %ebx - addl $((5<<8) | SMBUS_MEM_DEVICE_START), %ebx - CALLSP(smbus_read_byte) - jz 5f - testl $1, %ecx - jz 2f - cmpb $2, %al - jne 5f - - /* Display the bank and side we are spot checking. - */ -2: CONSOLE_INFO_TX_STRING($bank_msg) - movl %ecx, %ebx - shrl $1, %ebx - incl %ebx - CONSOLE_INFO_TX_HEX8(%bl) - CONSOLE_INFO_TX_STRING($side_msg) - movl %ecx, %ebx - andl $1, %ebx - CONSOLE_INFO_TX_HEX8(%bl) - - /* Compute the memory address to spot check. */ - movl %ecx, %ebx - xorl %eax, %eax -3: testl %ebx, %ebx - jz 4f - addl $0x04000000, %eax - decl %ebx - jmp 3b -4: - /* Spot check 512K of RAM */ - movl %eax, %ebx - addl $0x0007ffff, %ebx - CALLSP(spot_check) -5: - /* Now find the next bank and side to spot check */ - incl %ecx - cmpl $((SMBUS_MEM_DEVICE_END - SMBUS_MEM_DEVICE_START)<<1), %ecx - jb 1b - RET_LABEL(verify_ram) - -} -#endif - -#if 0 -static void ram_postinit(const struct mem_controller *ctrl) { -#if DEBUG_RAM_CONFIG - dumpnorth(); -#endif - /* Include a test to verify that memory is more or less working o.k. - * This test is to catch programming errors and hardware that is out of - * spec, not a test to see if the memory dimms are working 100% - */ -//# CALL_LABEL(verify_ram) - spd_set_ram_size(ctrl); -} -#define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit) - -#define SPECIAL_FINISHUP() CALL_LABEL(dram_finish) - -#endif - -#define ecc_pre_init "Initializing ECC state...\r\n" -#define ecc_post_init "ECC state initialized.\r\n" -static void dram_finish(const struct mem_controller *ctrl) -{ - uint32_t dword; - uint8_t byte; - /* Test to see if ECC support is enabled */ - dword = pci_read_config32(ctrl->d0, 0x7c); - dword >>=20; - dword &=3; - if(dword == 2) { - -#if DEBUG_RAM_CONFIG - print_debug(ecc_pre_init); -#endif - /* Initialize ECC bits , use ECC zero mode (new to 7501)*/ - pci_write_config8(ctrl->d0, 0x52, 0x06); - pci_write_config8(ctrl->d0, 0x52, 0x07); - do { - byte = pci_read_config8(ctrl->d0, 0x52); - - } while ( (byte & 0x08 ) == 0); - - pci_write_config8(ctrl->d0, 0x52, byte & 0xfc); -#if DEBUG_RAM_CONFIG - print_debug(ecc_post_init); -#endif - - /* Clear the ECC error bits */ - pci_write_config8(ctrl->d0f1, 0x80, 0x03); /* dev 0, function 1, offset 80 */ - pci_write_config8(ctrl->d0f1, 0x82, 0x03); /* dev 0, function 1, offset 82 */ - - pci_write_config32(ctrl->d0f1, 0x40, 1<<18); /* clear dev 0, function 1, offset 40; bit 18 by writing a 1 to it */ - pci_write_config32(ctrl->d0f1, 0x44, 1<<18); /* clear dev 0, function 1, offset 44; bit 18 by writing a 1 to it */ - - pci_write_config8(ctrl->d0, 0x52, 0x0d); - } - - dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */ - dword |= (1<<17); - pci_write_config32(ctrl->d0, 0x7c, dword); - - -#if DEBUG_RAM_CONFIG - dumpnorth(); -#endif - -// verify_ram(); -} -#if 0 -#define ERRFUNC(x, str) mem_err(x, str) - - -ERRFUNC(invalid_dimm_type, "Invalid dimm type") -ERRFUNC(spd_missing_data, "Missing sdram spd data") -ERRFUNC(spd_invalid_data, "Invalid sdram spd data") -ERRFUNC(spd_unsupported_data, "Unsupported sdram spd value") -ERRFUNC(unsupported_page_size, "Unsupported page size") -ERRFUNC(sdram_presence_mismatch, "DIMM presence mismatch") -ERRFUNC(sdram_value_mismatch, "spd data does not match") -ERRFUNC(unsupported_refresh_rate, "Unsuported spd refresh rate") -ERRFUNC(inconsistent_cas_latencies, "No cas latency supported by all dimms") -ERRFUNC(unsupported_rcd, "Unsupported ras to cas delay") -#undef ERRFUNC - -#define mem_err_err "ERROR: " -#define mem_err_pair " on dimm pair " -#define mem_err_byte " spd byte " -static void mem_err { - movl %ebx, %edi - CONSOLE_ERR_TX_STRING($mem_err_err) - CONSOLE_ERR_TX_STRING(%esi) - CONSOLE_ERR_TX_STRING($mem_err_pair) - movl %edi, %ebx - subb $(SMBUS_MEM_DEVICE_START), %bl - CONSOLE_ERR_TX_HEX8(%bl) - CONSOLE_ERR_TX_STRING($mem_err_byte) - movl %edi, %ebx - CONSOLE_ERR_TX_HEX8(%bh) - jmp mem_stop - -} - -#endif - - -#if ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG -#define ram_enable_1 "Ram Enable 1\r\n" -#define ram_enable_2 "Ram Enable 2\r\n" -#define ram_enable_3 "Ram Enable 3\r\n" -#define ram_enable_4 "Ram Enable 4\r\n" -#define ram_enable_5 "Ram Enable 5\r\n" -#define ram_enable_6 "Ram Enable 6\r\n" -#define ram_enable_7 "Ram Enable 7\r\n" -#define ram_enable_8 "Ram Enable 8\r\n" -#define ram_enable_9 "Ram Enable 9\r\n" -#define ram_enable_10 "Ram Enable 10\r\n" -#define ram_enable_11 "Ram Enable 11\r\n" -#endif - - /* Estimate that SLOW_DOWN_IO takes about 50&76us*/ - /* delay for 200us */ - -#define DO_DELAY \ - udelay(200); -// for(i=0; i<16;i++) { SLOW_DOWN_IO } - - -#define EXTRA_DELAY DO_DELAY - -static void sdram_enable(int controllers, const struct mem_controller *ctrl) -{ - int i; - /* 1 & 2 Power up and start clocks */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_1); - print_debug(ram_enable_2); -#endif - - /* A 200us delay is needed */ - - DO_DELAY - EXTRA_DELAY - - /* 3. Apply NOP */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_3); -#endif - RAM_NOP(ctrl); - EXTRA_DELAY - - /* 4 Precharge all */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_4); -#endif - RAM_PRECHARGE(ctrl); - EXTRA_DELAY - - /* wait until the all banks idle state... */ - /* 5. Issue EMRS to enable DLL */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_5); -#endif - RAM_EMRS(ctrl); - EXTRA_DELAY - - /* 6. Reset DLL */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_6); -#endif - RAM_MRS(ctrl,1); - EXTRA_DELAY - - /* Ensure a 200us delay between the DLL reset in step 6 and the final - * mode register set in step 9. - * Infineon needs this before any other command is sent to the ram. - */ - DO_DELAY - EXTRA_DELAY - - /* 7 Precharge all */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_7); -#endif - RAM_PRECHARGE(ctrl); - EXTRA_DELAY - - /* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_8); -#endif - RAM_CBR(ctrl); - EXTRA_DELAY - RAM_CBR(ctrl); - EXTRA_DELAY - /* And for good luck 6 more CBRs */ - RAM_CBR(ctrl); - EXTRA_DELAY - RAM_CBR(ctrl); - EXTRA_DELAY - RAM_CBR(ctrl); - EXTRA_DELAY - RAM_CBR(ctrl); - EXTRA_DELAY - RAM_CBR(ctrl); - EXTRA_DELAY - RAM_CBR(ctrl); - EXTRA_DELAY - - /* 9 mode register set */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_9); -#endif - RAM_MRS(ctrl,0); - EXTRA_DELAY - - /* 10 DDR Receive FIFO RE-Sync */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_10); -#endif - RAM_RESET_DDR_PTR(ctrl); - EXTRA_DELAY - - /* 11 normal operation */ -#if DEBUG_RAM_CONFIG - print_debug(ram_enable_11); -#endif - RAM_NORMAL(ctrl); - - - // special from v1 - //FIRST_NORMAL_REFERENCE(); - //spd_set_ram_size(ctrl, 0x03); - - /* Finally enable refresh */ - ENABLE_REFRESH(ctrl); - - //SPECIAL_FINISHUP(); - dram_finish(ctrl); - -} - diff --git a/src/northbridge/intel/855pm/raminit.h b/src/northbridge/intel/855pm/raminit.h deleted file mode 100644 index 6e40683066..0000000000 --- a/src/northbridge/intel/855pm/raminit.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef RAMINIT_H -#define RAMINIT_H - -#define DIMM_SOCKETS 4 -struct mem_controller { - device_t d0; - uint16_t channel0[DIMM_SOCKETS]; -}; - - -#endif /* RAMINIT_H */ diff --git a/src/northbridge/intel/855pm/reset_test.c b/src/northbridge/intel/855pm/reset_test.c deleted file mode 100644 index 79a5cdaee1..0000000000 --- a/src/northbridge/intel/855pm/reset_test.c +++ /dev/null @@ -1,18 +0,0 @@ -/* Convert to C by yhlu */ -#define MCH_DRC 0x7c -#define DRC_DONE (1 << 29) - /* If I have already booted once skip a bunch of initialization */ - /* To see if I have already booted I check to see if memory - * has been enabled. - */ -static int bios_reset_detected(void) { - uint32_t dword; - - dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC); - - if( (dword & DRC_DONE) != 0 ) { - return 1; - } - - return 0; -} -- cgit v1.2.3